we used for sale

Key data: 295 mm, 100 kg

Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Max capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Equipped with one 3-jaws concentric chuck Ø 200 mm Voltage: 220 V mono Dimensions on support: L 800 x W 450 x H 1200 mm

YASKAWA MOTOMAN AR 2010 robotic welding station was built in 2022 in Japan by Yaskawa Electric Corporation. The system is used for precision arc welding of workpieces with even the most complex geometries. All the components of the station are integrated inside an enclosed structure. The robotic welding cell is fully complete and consists of the following components: – robot arm: YASKAWA MOTOMAN AR2010 – controller: MOTOMAN YRC1000 – welding positioner: YASKAWA H-2000D (2 pcs.) – welder: LORCH – light curtains: PANASONIC – torch cleaning station: BRG-2000 D – control panel The machining process is performed by a YASKAWA 6-axis robot, which is distinguished by, among others, its clever design and robust arm with an increased range of movement. Its compact, slightly curved design enables efficient working in a small amount of space without the risk of collision w ...

A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible.

Used dough divider RHEON, type: Twin DIvider 400 VX 202 Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Initial width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - Condition: Good, ready to use Visits and test runs are possible by arrangement.

table length: 2990 mm table width: 1490 mm table height: 850 - 900 mm weight of the machine ca.: 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A welding system with a KUKA robot and a rotary device is available. Payload: 15kg, repeatability: ±0.1mm, reach: 1570mm, axes: 6, weight: approx. 225kg. An on-site inspection is possible.

welding current: 10 - 200 A connected load frequency: 230 V weight: 6,5 kg Dimensions (LxWxH): 380 x 120 x 250 mm TIG Welder AC/DC, Pulse Demo unit in aluminum box Includes all accessories See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible.

Offer 25146 Specifications: - Portable version suitable for CrNi steels - Air volume flow approx. 200 m³/h - Max. vacuum 19000 Pa - Filter area approx. 0.8 m² - Filter separation efficiency 99.9% - Extraction connection 60 mm - Suction hose 6 m - EWM water-cooled burner package with 4 m extraction function - Start-stop automatic - Dust drawer - Drive - Fan 230 V / 1.1 kW - Space requirement approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Offer 25147 Specifications: - Portable version suitable for CrNi steels - Air volume flow approx. 200 m³/h - Max. vacuum 19000 Pa - Filter area approx. 0.8 m² - Filter separation efficiency 99.9% - Extraction connection 60 mm - Suction hose 5 m - Burner package water-cooled with suction function 4 m - Start-stop automatic - Dust drawer - Drive - Fan 230 V / 1.1 kW - Space requirement approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)

1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)

1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)

1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)

1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)

1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)

Soyer KTS 850 Working Area: X 800mm x Y 750mm Positioning accuracy according to the manufacturer: +/- 0.2 mm Welding range from M3-M10 to 40mm length 2 welding heads: Head 1 works perfectly, head 2 no longer welds reliably but works. Intuitive component programming via dxf data Machine completely enclosed with safety-monitored door Weight approx. 900kg 2x welding machines BMS-10N tip ignition according to DVS leaflet 0903 with gap and contact welding Weight approx. 20Kg 2x Universal vibrator UVR-300 Automatic bolt feeding from M3 to M8 and bushings up to M5 Weight approx. 48kg/vibrator plus accessories Other accessories: Various bolt holders for external threads from M3 to M8 Various push-in pistons with spacer rings for different bolt lengths Pneumatic Mass Tensioners Various feed hoses from M3 to M8 male thread

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Ipeka Made in Finland Description Ipeka packaging machine with 2 bag blowers used

Height=1.85 m, Overall length= 2.5 m, Overall width= 3.5 m, Producer: Ipeka condition: Refurbished Made in Finland Description The Ipeka counter is a great solution for counting fresh and frozen bakery products into boxes Refurbished in good working order

Sartorius SYNUS10 Metal detector checkweigher Stainless, overall belt dimensions 1700mm x 150mm, with Sartorius MDP Plus metal detector aperture 200mm W x 330mm H, checkweigher platform 260mm x 150mm, weight rang 100g to 2000g, two push arm rejects, previously used for jars of olives, 1Ph Password 1827

Welding Width: 900 mm // Bag Length (Max): 10000 mm

Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Heavy-duty TIG welding machine. TIG welding Welding range 3~ 400 V:[A] 3 - 300 TIG Duty cycle 400 V Duty cycle DC 100% (40°c):[A] 250 Duty cycle DC 60% (40°c):[A] 300 Duty cycle DC at max. current (40°c):[%] 60 Electrode welding Welding range 400 V:[A] 20 - 250 Weldable electrodes:[Ø in mm] 1.5 - 6 Electrode duty cycle Duty cycle at max. current (40°c):[%] 80 Mains 400 V Mains voltage 3~ (50/60 Hz):[V] 400 Cooling type: Water-cooled Dimensions length x width x height Dimensions (LxWxH)[mm] 1,130 × 450 × 815 Weights Weight:[kg] 93.6 Weight, water cooling (filled):[kg] 14.7

number: 10 Positionen weight: 30 kg condition: neu : 28 mm 5 screw clamps Thrust length 155 mm Length 300 mm Condition: new Hole diameter 28 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,5 t dimensions: 3,0 x 1,5 x 0,9 m Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8813 Type: IRB 2400 Producer: ABB Created: 2011 Parameters: Hours: 22152 h Maximum arm reach: 1500 mm Maximum load capacity: 10 kg Machine weight: 150 kg

Inv. Num. : 8814 Type: IRB 2600 Producer: ABB Created: 2014 Parameters: Operating hours: 5162 h Maximum arm reach: 1650 mm Maximum load capacity: 12 kg Machine weight: 150 kg

used weigher Kemper Imperator, overhauled, with 1 chamber, with lubrication, for small and large weights, hopper for approx. 200 kg dough, hourly output up to 1,500 pieces / h, weight range 200 to 2,300 g

A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible.

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible.

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

Inv. Num. : 8857 Type: IRB 6400 M98 Producer: ABB Created: 2003 Parameters: Maximum arm reach: 2400 mm Number of axles: 6 pieces Maximum load capacity: 120 kg Machine weight: 2030 kg

A resistance spot welding machine Pei is available. Rated power at 50%: 35kVA, secondary short-circuit current: 19kA, max. welding current: 15.2kA, secondary continuous current: 4.8kA, secondary voltage: 5.3V, electrode force: 180daN, arm spacing range: 140mm-350mm, arm reach: 430mm, arm diameter: 50mm, electrode stroke: 60mm, weight: approx. 280kg. Documentation vorhanden. An on-site inspection is possible.

Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm

Several wet adhesive tape dispensing machines activaTec are available. Rated output: approx. 300m/min, tape width: 70mm, machine dimensions X/Y/Z: approx. 480mm/330mm/280mm, weight: approx. 12kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture is an example.

CNC Laser Cutting Machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of Make: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 KW Processing area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminium (max.): 8 mm Working Temperature: + 10 to + 30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet left Æ 250 mm Laser Source IPG Ytterbium Laser System YLS 2.5 kW Laser Chiller LC 170.01-A.3.5 Voltage: 400V/3P/50Hz Filter system TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 mm x 3,610 mm

connected load frequency: 230 V dimensions: 1,6 x 0,8 x 1,55 mm weight: kg Bubble wrap machine - Documentation - Includes 7 rolls of film - Like new condition See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: IGM Model: RTE 497-S Year of Manufacture: 2021 Technical Specifications Robot System - Control system: Fully digital PC robot control, type RCE - Software: Windows 10 & Linux-based system with IGM robot software K6 - Welding process: 135 (GMAW), single-wire, wire diameter 1.2 mm - Welding power source: Digital inverter welding power source TPS 500i - Output: 500 A at 40% duty cycle - Robot periphery: Rotating boom for floor installation, boom length 2.5 m - Number of workstations: 1 Workstation - 3-axis L-manipulator with lifting device - Nominal load capacity: 2 t Safety Equipment - Pistol safety shut-down in wrist axis - Emergency stop on hand tablet, manipulators, and control panel - Three-colour warning light for operating status - Safety partition - Safety door Robot Dimensions and Performance - Travel path: 5,000 mm - Arm length: 2,500 mm - Lift: 1,000 mm - ...

Medium-frequency welding machine BIHLER B 5000 consisting of: 1 BIHLER B 5000 welding control 1 welding transformer 130 kVA Welding power: 130 kVA Connection: 400 V, 50 Hz.

BIHLER resistance welding system consisting of: 1 BIHLER B 1000 welding control 2 welding transformers 2 x 64 kVA Welding power: 2 x 64 kVA Connection voltage: 400 V 50 Hz

A used dough weigher W&P Parta U2001 stainless steel is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP PartaU 2001 - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output macx. 1140 Pieces - the dough divider is in baker's condition - Year of construction 2007

A Dornier weaving machine is available. Working width: 3300mm. Documentation available. Including heald frames. Without prewinder. On-site inspection is possible.

BIHLER DC welding system consisting of: 1 BIHLER B 10 welding control 3 welding transformers each 70 kVA 1 cooling unit Welding power: 3 x 70 kVA Connection voltage: 400 V, 50 Hz.

PND CB8 automatic coring and wedging line for Apples Consisting of tank for apple collecting, automatic feeder, cutting station and waste conveyor Capacity 100-120 fruits / min 60-110mm size Machine dimensions 4450mm x 2100mm x 2530mm Power - 4.74 kw Air - 5 bar Consumption 90 NL / Min Wedges 6,8,10,12,14,16

FEEDSTOCK STEEL STRIP   sheet thickness max.: 4 mm   sheet thickness min.: 0.8 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 24.9 mm   external diameter max.: 60 mm   wall thickness min.: 0.8 mm   wall thickness max.: 4 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling system consisting of: - large coil reel - Bandschweisseinrichtung - optional: horizontal band loop - side planer - forming unit - HF welding unit - units for outside scarfing, inside scarfing - each without impeders, tooling - cooling section - calibration unit   with alternative calibration station for ovals, polygons - flying saw - chip blow unit - hexagon bundling- and binding unit optional roll-sets available for: forming section: 26,30, 32, 36, 38, 40, 44, 46, 52, 60 mm calibration section: 25, 26, 29.5, 29.89, 30, 32, 33, 33 ...

FEEDSTOCK STEEL STRIP   sheet thickness max.: 4 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 51 mm specifically suitable for the welding of USM furniture tubes -Large reel without storage -Strip welding device -Side planer -Calibrating roll stand -Forming unit -HF welding unit THERMOTOOL -Unit for scraping without tools -Cooling section -Calibrating unit -Flying saw -Removal section for manual removal -Roller sets for 19, 20, 25, 35.9, 36, 37, 40.8, 41 mm -Various accessories and machine-specific spare parts -Documentation and maintenance logs -CE declaration

KUKA KR 8 R2100-2 arc HW robotic welding station was built in 2021 in Germany by KUKA Deutschland GmbH. The system is designed for precision welding of workpieces with even the most complex geometry. All the necessary components are integrated inside the modular design, enabling the workstation to be adapted accordingly to current production needs. The workpiece welding process is performed by a KUKA 6-axis robot from the KR CYBERTECH ARC series. The machine is distinguished by its compact design, which provides a high degree of movement freedom even in hard-to-reach places. To avoid any collision of cables with other station components, they were routed inside the robot arm. All this is complemented by an easy-to-use controller with a range of additional functions. During automated welding, dynamic and accurate feeding of the welding wire is very important. To achieve this, a reli ...

Offer 25396 Technical data: - Load capacity 250 kg - Face plate diameter 600 mm - Table height in horizontal position 910 mm - Face plate can be infinitely swivelled by hand crank - Face plate speed electr. infinitely variable 0.2 - 2 rpm - Welding current transmission 300 A - Drive 220 V - Right + Left - Run - E. footswitch - Space requirement approx. W 800 x H 910 x D 1200 mm - Weight approx. 150 kg