wave used for sale

Magnetic coupling PSP POHONY ELS 1.25 24V CSN 02 6517 ( ? SN026517 ) 4431013/63 shaft diameter: Ø 20 mm wavelength: 46 mm 1 groove, width: 6 mm number of clutch plates: 4 control voltage: 24 V DC used, tested ! Dimensions: 100 x 100 x 46 mm

Magnetic coupling, without coupling basket VEM Dessau KLDO10 TGL 9922 ( TGL9922 ) shaft diameter: Ø 30 mm wavelength: 53 mm 1 groove, width: 8 mm number of clutch plates: 5 control voltage: 24 V DC used, tested ! Dimensions: 173 x 133 x 53 mm

T-Shape 3 in1 Multisystem // Year of manufacture 2020 T-Shape combines 3 powerful technologies that work simultaneously to promote the production of collagen and significantly reduce the local volume of fat and elasticity of the skin. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness - Tightening of the skin - Reduction of cellulite - Reduction of fat deposits - Reduction of scope - Treatment after liposuction - Face lift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar and hexapolar radio frequency signal. Heat is generated by the contact of the RF (radio frequency) energy with the tissue impedance. With proper heating, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, an ...

Magnetic coupling VEM Dessau KLDO20 TGL 22050 ( TGL22050 ) shaft diameter: Ø 50 mm wavelength: 72 mm 1 groove, width: 14 mm number of clutch plates: 6 control voltage: 24 V DC New ! Dimensions: 193 x 158 x 72 mm

OPTICAL SORTING UNIT, To sort different colors of PET HDPE PP PVC PC ABS PMMA and more, Customizable from 1 to 6 channels, High precision and smart technology which uses A.I.to grant excellent performances., The best cost-effective deal you can find to improve your final product or create a new business., Very quick assistance if needed, Compact and versatile machine, available from 0,940 .up to 2,7 mt. wide (L x H: 1,8 x 1,8 mt.), For a variety of different uses, this machine can separate parts as small as a salt grain and as large as a walnut so increasing the value of your reground plastic scraps ., The control panel with its touch screen allows full customisation on different materials and colors., The 16 million colors high resolution digital cameras gives extremely high performances and can recognize down to 0,09 mm.large defects., The NIR cameras allow to detect stone, glass, soil ...

mechanical coupling, multi-plate clutch WMW, KUPPLUNGSWEK DRESDEN 40 - TGL 20767 shaft diameter: Ø 40 mm wavelength: 1 40 mm 1 groove, width: 12 mm Number of clutch discs: 8 Clutch disc diameter: Ø 140 mm used, tested ! Dimensions: 155 x 155 x 140 mm

Fiber Laser welder 3 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ℃  ...

Magnetic coupling, multi-plate coupling FONAR OSTRZESZOW ? TM-095C-1H ( ETM-095C-1H ) Shaft diameter: Ø 36 / 40 mm, spline profile, 8 wedges Wavelength: 77 mm Number of clutch discs: 4 Control voltage: 24 V DC used, tested ! Dimensions: Ø 118 x 77 mm

Fiber Laser welder 2 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 � ...

BYSTRONIC BySprint 3015 laser cutting machine was built in 2006 in Switzerland. Designed for even the most intensive machining, the machine uses an extremely stable 3 kW laser beam, whose excellent parameters ensure the highest energy efficiency while maintaining low operating costs. Additionally, in order to meet any production challenges, the process of loading and unloading the workpieces can be performed during the cutting process, which significantly increases production efficiency and reduces machine downtime to a minimum. The offered BySprint 3015 laser cutting machine has been regularly serviced and its total weight is approximately 12000 kg. Technical specifications of the BYSTRONIC BySprint 3015 laser - laser beam power: 3 kW - laser beam power adjustment range: 150 – 3000 W - work area (L x W): 3048 x 1524 mm - maximum sheet metal dimensions (L x W): 3000 x 1500 mm - ...

Three-phase electric motor VEM KMRB 100 S2 ( KMRB100S2 ) 4,0 kW 2880 rpm 220 / 380 V 3AC 50 Hz design: B3 IP54 shaft diameter: Ø 28 mm wavelength: 60 mm groove width: 8 mm motor base: 174 x 190 mm hole spacing ( parallel to shaft ): 110 mm hole spacing ( transverse to shaft ): 160 mm hole diameter: Ø 12.5 mm New ! Dimensions: 360 x 200 x 235 mm

Geared motor VEM ZG2 KPR 71 K 6 ( ZG2KPR71K6 ) 0,37 kW 20 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 32 mm wavelength: 80 mm groove width: 10 mm motor base: 165 x 205 / 210 mm hole spacing ( parallel to shaft ): 120 mm hole spacing ( transverse to shaft ): 170 mm hole diameter: Ø 14 mm New ! Dimensions: 485 x 210 x 235 mm

Geared motor with brake SEW EURODRIVE S60 DT100LS-4B/HR/TH/Z ( S60DT100LS-4B/HR/TH/Z ) 2,5 kW 67 rpm 220 / 380 V 3AC 50 Hz IP44 gearbox shaft diameter: Ø 35 mm wavelength: 60 mm, Groove width: 10 mm motor Shaft diameter: Ø 35 mm Shaft length: 40 mm, Groove width: 6 mm Gear foot: 200 / 170 x 150 mm hole spacing: 130 mm all holes: Ø 14 mm Sprocket: Diameter: Ø 100 mm, Width: 15 mm, Teeth: 11 used, checked ! Dimensions: 690 x 250 x 240 mm

geared motor SEW KAF67 DV132S4 ( KAF67DV132S4 ) 5,5 kW 148 rpm 230 / 400 V 3AC 50 Hz IP55 Hollow shaft diameter: Ø 40 mm Hollow wavelength: 180 mm Groove width: 12 mm flange diameter: Ø 180 / 250 mm Bolt circle diameter: Ø 215 mm hole diameter: Ø 13.5 mm as good as new ! Dimensions: 710 x 230 x 290 mm

Geared motor, variable LENZE GST 05 2KVCK090-3213C 003620 A ( GST052KVCK090-3213C003620A ) GST 05 2VCK090-3213C 003622 A ( GST052VCK090-3213C003622A ) 25-134 rpm I = 24.933 Motor: MGERAXX090-32 1.5 kW 1400 RPM 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - Operation is possible ! IP 55 shaft diameter: Ø 24 mm Wavelength: 50 mm Shaft tube: Ø 11 mm, Distance: 25 / 25 mm flange diameter: Ø 110 / 160 mm Bolt circle diameter: Ø 130 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 500 x 380 x 210 mm

DC geared motor, geared motor MAXON MOTOR 2023.2023.914-63.571-000 Gear ratio: 900 : 1 shaft diameter: Ø 6 mm wavelength: 15 mm flange: 38 x 38 mm hole spacing: 30 mm 4x Bore: Ø 2.8 mm guide bushing: Ø 12 mm, Length: 6 mm New ! Dimensions: 84 x 38 x 38 mm

Pneumatic swivel actuator, double-acting FESTO DSR-25-180-P 11911 Operating pressure: 2 - 8 bar adjustment range Swivel angle: 0 - 180 ° swivel angle: 0 - 180 ° Shaft diameter: Ø 12 mm Wavelength: 30 mm Groove width: 4 mm 1x Position sensor: IFM IE5090 IEB3001-BPKG/US approx. 0.0. 5 m cable with plug used, checked! Dimensions: 140 x 100 x 95 mm

Pneumatic swivel actuator, double-acting FESTO DSR-16-180-P 11910 operating pressure: 2 - 8 bar adjustment range swivel angle: 0 - 1 80 ° Swivel angle: 0 - 180 ° Shaft diameter: Ø 10 mm Wavelength: 23 mm Groove width: 3 mm used, tested ! Dimensions: 78 x 77 x 70 mm

Tachogenerator, Encoder, Speed sensor RADIO-ENERGIE RE. O444 N1B 0.15 EG ( RE. O444N1B0.15EC ) Open circuit voltage: 0.15EC 15 V per rpm speed: max. 4000 rpm IP44 Shaft diameter: Ø 7 mm Wavelength: 30 mm Groove width: 2 mm flange diameter: Ø 114 / 85 mm Bolt circle diameter: Ø 100 mm hole diameter: Ø 6, 5 mm approx. 1.0 m connection cable New ! Dimensions (without cable): 165 x 115 x 115 mm

Double Vane Pump, Hydraulic Pump, Variable Volume REXROTH P2V7/06-10A0+V7/06-10A0RE01+01E4 R900903112 pump 1: P2V7-11/06-10RE01MA0-10 R900903108 p: 50 - 100 bar Q: 10 cm3 / U pump 2: P2V7-11/06-10RA01MA0-10 R900563233 p: 50 - 100 bar Q: 10 cm3 / U shaft diameter: Ø 20 mm Wavelength: 36 mm Groove width: 6 mm flange: Ø 80 mm / 96 x 96 mm Bolt circle diameter: Ø 101.5 mm hole diameter: Ø 10.1 mm New ! Dimension: 230 x 225 x 3135 mm

Description: In case With operating instructions Technical data: Laser power ≤ 1mW (laser class 2) Laser light: visible red light Wavelength: 635 nm Accuracy: max. +/- 0.3 mm/m deviation Operating time: approx. 10 h without recharging Speed: 0 - 460 rpm stepless For further technical data see pictures Approx. Onsite Dimension. (l x w x h): 400 x 260 x 120 mm, weight approx.: 8 kg

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

Series No: 96225/64, Straight Line, Crash Lock, 4 Gluing Points, Width unfold: Max: 880, Min: 45, Width fold: Max: 425, Min: 18, Lenght Unfold: Max: 900, Min: 60, Capacity: 0-300 m/min, Material: Corrugated Cardboard with Waves E and B, Cardboard, With Bobst Polyfoder, M-No. 390101, AGE: 1972, Standard Accessories

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Very nice corrugator from roll to cutted material. Running with electrical energy only. 400 V Flute type: SE B SB N E F Flute height: 1.40 2.50 2.50 0.40 1.40 0.75 Flute factor: 1.25 1.35 1.35 1.136 1.34 1.22 Stitch: 4.50 6.50 6.50 1.90 4.50 2.40 Maximum gross width: 127 cm Maximum net width (2): 120 cm Minimum paper width: 74 cm (applies to all waves types) Reel width min: 2 x 1.5 Reel width max: 2 x 80 mm

mechanical coupling ORTLINGHAUS KUPPLUNGEN factory no. 88-14119 shaft diameter: Ø 90 mm Wavelength: 160 mm 1 groove, width: 25 mm flange diameter: Ø 440 mm bolt circle diameter: Ø 410 mm hole diameter: Ø 13 mm with thrust bearing and additional shift ring New ! Dimensions: 440 x 440 x 160 mm

Servo motor, permanent magnet motor, water-cooled SIEMENS 1PH4138-4NF26 30 kW 1500 rpm 244 V IP65 Shaft: Ø 42 mm Wavelength: 110 mm flange: 250 x 250 mm, hole spacing: 212 mm, Holes: Ø 18 mm used, tested ! Dimensions: 730 x 265 x 340 mm

Servo motor with gear, permanent magnet motor SEW KHF37DY71S/TH 79 rpm 400 V 3AC 150 Hz IP65 Hollow shaft diameter: Ø 30 mm with RINGFEDER® clamping set RfN 4061 038x072-k wavelength: 145 mm flange diameter: Ø 110 / 160 mm bolt circle diameter: Ø 130 mm hole diameter: Ø 9.0 mm New ! Dimensions: 440 x 210 x 180 mm

Pneumatic Swing Actuator, Double Acting FESTO DSM-25-270-P-A-B 547578 Operating pressure: 1,5 - 10 bar adjustment range Swivel angle: 0 - 270 ° swivel angle: 0 - 270 ° shaft diameter: Ø 12 mm wavelength: 30 mm groove width: 4 mm New, with underlays ! Dimensions: 140 x 100 x 95 mm

Spectrophotometer. Microprocessor controlled, compact and powerful with reference beam technology with a wavelength range from 190-1100 nm for routine and variable applications., Additional title: spectrophotometer, Wavelength range: 1100 nm Due to a defective UV lamp, measurements can only be taken in the visible light spectrum., Wavelength accuracy: 1 nm in Wavelength Range 320 – 900 nm, Wavelength resolution: 0 nm, Voltage: 100 - 240, Frequency: 50/60, Length: 500 mm, Width: 450 mm, Height: 200 mm, Weight: 15 kg

Slitter rewinder for paper and foil Manufacturer = Titanium, Type SR7 Max. material width = 1350 mm Max. working width = 1300 mm max. speed = 400 m/min Diameter unwinder = max. 1000 mm Rewinder diameter = max. 800 mm 76 / 152 mm sleeve With pressure roller Friction Waves 76 / 152 Cutting system = paper cut Upgrade 2007 with automatic knife adjustment (Newtec) Motor with electric brakes Side edge control With adhesive table Roll removal device

Three-phase electric motor, three-phase motor, electric motor LENZE SDSGAXX056-22 0,24 kW 2790 rpm 230 V 3 AC 100 Hz IP54 shaft diameter: Ø 11 mm wavelength: 23 mm groove width: 4 mm flange diameter: Ø 89 / 60 mm Bolt circle diameter: Ø 75 mm 4x Threaded hole: M5 x 0.8, depth: 15 mm New ! Dimensions: 186 x 90 x 140 mm

Geared Motor, Single Phase Geared Motor AKRON 4APJC80-2S 0,55 kW 36 rpm 230 V 1AC 50 Hz IP54 hollow shaft diameter: Ø 24 mm wavelength: 130 mm groove width: 8 mm gear foot: 120 x 120 mm hole spacing: 80 / 100 mm 4x Bore: Ø 10.5 mm used, tested ! Dimensions: 515 x 200 x 265 mm

Geared motor, three-phase motor with gear LENZE SDSGAXX056-22 n: 413.5 rpm gearbox: SPL62-1NVCR i = 6, 75 Motor: SDSGAXX056-22 0.24 kW 2790 RPM 230 V 3 AC 100 Hz IP54 Shaft Diameter (Gearbox): Ø 14 mm wavelength: 30 mm groove width: 5 mm flange diameter: Ø 62 / 40 mm bolt circle diameter: Ø 52 mm 4x Threaded hole: M5 x 0.8, depth: 15 mm used, tested ! Dimensions: 280 x 90 x 140 mm

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...

mechanical clutch, multi-plate clutch ORTLINGHAUS KUPPLUNGEN factory no. 20 20/236232/10 shaft diameter: Ø 55 mm Wavelength: 92 mm 1 groove, width: 16 mm Number of clutch plates: 7 Clutch disc diameter: Ø 143 mm flange diameter: Ø 160 / 110 mm bolt circle diameter: Ø 125 mm 4x threaded hole: M10 x 1,5, Depth: 15 mm New ! Dimensions: 160 x 160 x 92 mm

Marking Hero - Fiber Laser 30W Marking area: 110 x 110 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser Type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Z-axis motorized H: 700 mm Repeatability/Lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply 240 V/50 Hz. External dimensions: 110 x 80 x 200 cm Front door: manual Available in stock from the end of April Price net plus VAT

Gearbox, Reducer Gearbox Head ORIENTAL MOTOR 4GK50K Ratio: 50 Shaft Diameter: Ø 10 mm Wavelength: 10 mm Groove width: 4 mm bevel gear: Ø 26,5 / 19 mm, Length: 10.5 mm, Teeth: 15 Housing length: 40 mm flange: 80 x 80 mm hole spacing: 67 mm hole diameter: Ø 5.5 mm New ! Dimensions: 80 x 80 x 80 mm

Gearbox, Reducer Gearbox Head ORIENTAL MOTOR 3GN18K Ratio: 180 Shaft Diameter: Ø 10 mm Wavelength: 10 mm mm Groove width: 4 mm housing length: 32 mm flange: 70 x 70 mm hole spacing: 48 mm hole diameter: Ø 5.5 mm New, with backings ! Dimensions ( gearbox ): 70 x 65 x 70 mm Dimensions ( packaging ): 100 x 86 x 86 mm

Gearbox, Reducer-Gear-Head ORIENTAL MOTOR 4GK60K Ratio: 60 Shaft diameter: Ø 10 mm Wavelength: 10 mm Groove width: 4 mm bevel gear: Ø 26,5 / 19 mm, Length: 10.5 mm, Teeth: 15 Housing length: 40 mm flange: 80 x 80 mm hole spacing: 67 mm hole diameter: Ø 5.5 mm New ! Dimensions: 80 x 80 x 80 mm

Geared motor with brake VEM ZG2 BMREB 80 G 4 ( ZG2BMREB80G4 ) 1,5 kW 100 rpm 220 / 380 V 3AC IP54 shaft diameter: Ø 32 mm wavelength: 80 mm groove width: 10 mm flange diameter: Ø 130 / 200 mm bolt circle diameter: Ø 165 mm hole diameter: Ø 10.5 mm New ! Dimensions: 565 x 200 x 245 mm

Actuator, DC motor VEM, ELBTALWERK WSM 2-112.25-1212 TGL 34020/03 500 / 2000 rpm 60 / 200 V DC 25,3 A IP54 with resolver HARTHA type 1969.1 shaft: Ø 28 mm wavelength: 60 mm flange: Ø 180 / 200 x 200 mm, Bolt circle diameter: Ø 215 mm holes: Ø 14 mm used, tested ! Dimensions ( without eyelet ): 860 x 215 x 215 mm

Geared motor BAUER BS06-62U/D06LA4/MG 0.25 KW 9.2 rpm 220 - 255 / 380 - 440 Volt 3AC 50 Hz 60 Hz - operation is possible ! IP65 Shaft diameter: Ø 25 mm, Shaft length: 45 mm Groove width: 8 mm with adapter for hollow shaft diameter: Ø 20 mm wavelength: 80 mm, groove width: 6 mm gear base: 100 x 100 mm hole spacing: 80 mm all threaded holes: M8 x 1.25, depth 15 mm used, tested ! Dimensions: 340 x 240 x 180 mm

Geared motor SEW-Eurodrive SAF57 DT71D6/TF ( SAF57DT71D6/TF ) 0.25 kW 4.4 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP54 Hollow shaft diameter: Ø 30 mm wavelength: 150 mm Groove width: 8 mm flange diameter: Ø 200 / 130 mm bolt circle diameter: Ø 165 mm 4x Bore: Ø 11 mm used, tested ! dimensions: 410 x 225 x 215 mm

Geared motor with brake SEW-Eurodrive SA57/T DT80K4/BMG/TF ( SA57/TDT80K4/BMG/TF ) 0.55 kW 36 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP54 Hollow shaft diameter: Ø 35 mm wavelength: 150 mm Groove width: 10 mm 2x Flange: Diameter Ø 120 / 80 mm Bolt circle diameter: Ø 102.5 mm 8x Threaded hole: M8 x 1.25, depth: 15 mm used, tested ! Dimensions: 505 x 160 x 210 mm

Geared motor with brake SEW-Eurodrive RF17 DT71D4/BMG ( RF17DT71D4/BMG ) 0.37 kW 224 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP54 Shaft diameter: Ø 19 mm wavelength: 40 mm groove width: 6 mm flange diameter Ø 160 / 110 mm bolt circle diameter: Ø 130 mm 4x Bore: Ø 8.5 mm used, tested ! Dimensions: 445 x 160 x 200 mm

Geared motor with brake SEW-Eurodrive RF27 DT80N4/BMG ( RF27DT80N4/BMG ) 0.75 kW 104 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP54 shaft diameter: Ø 25 mm wavelength: 50 mm groove width: 8 mm flange diameter Ø 160 / 110 mm bolt circle diameter: Ø 130 mm 4x Bore: Ø 8.5 mm used, tested ! Dimensions: 520 x 200 x 200 mm

Geared motor with brake SEW-Eurodrive RF27 DT80K4/BMG ( RF27DT80K4/BMG ) 0.55 kW 102 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP54 shaft diameter: Ø 25 mm wavelength: 50 mm groove width: 8 mm flange diameter Ø 160 / 110 mm bolt circle diameter: Ø 130 mm 4x Bore: Ø 8.5 mm used, tested ! Dimensions: 520 x 200 x 200 mm

Geared motor with brake SEW-Eurodrive RF27 DT90L4/BMG ( RF27DT90L4/BMG ) 1.5 kW 173 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP54 Shaft diameter: Ø 25 mm wavelength: 50 mm groove width: 8 mm flange diameter Ø 160 / 110 mm bolt circle diameter: Ø 130 mm 4x Bore: Ø 8.5 mm used, tested ! dimensions: 560 x 200 x 265 mm

Geared motor LENZE GST04-2 B VCK 071-32 ( GST04-2BVCK071-32 ) 0.37 kW 56 rpm motor: Type MDEBA1M071-32 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP54 shaft diameter: Ø 19 mm wavelength: 40 mm groove width: 6 mm flange diameter Ø 160 / 110 mm bolt circle diameter: Ø 130 mm 4x Bore: Ø 8.5 mm control box is slightly damaged ( hole ) used, tested ! Dimensions: 445 x 160 x 200 mm