128,007 used machines on RESALE, but how to find them? Machine Search
oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg
WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...
Grundfos Water Pump CRN10-02 with Control Pump from 2022, as good as new, complete with control system, 1 available. 0.75 KW, 10 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN10-02 A-FGJ-G-E-HQQE Serial number: 0001 Type: Water Pump with Control Power [kW]: 0.75 Flow rate [m3/h]: 10 Pressure max [bar]: 25 Pumping height [m] 15 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, immersion pump -Cooling water pump: coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Dimensions total: 500/340/H880 mm -Weight: 74 kg
Cooling water pump, radiator, water pump, engine cooling -Manufacturer: SKF, water pump -Type: AquaMax VKPC 81602 -Dimensions: see photos -Carton dimensions: 190/125/H120 mm -Weight: 1.3 kg
Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer:BEKO, air compressor oil-water separator -Type: 30/0.8Mpa -Dimensions: Ø 360 x 1220 mm -Weight: 24 kg
Grundfos Water Pump CRN3-23 Pump from 2022, as good as new, complete 2 available. 2.2 KW, 3 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN3-23 A-P-G-E-HQQE Serial Number: 0003 / 0004 Type: Water Pump with Control Power [kW]: 2.2 Flow rate [m3/h]: 3 Pressure max [bar]: 25 Pumping height [m] 113 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40
chiller, chiller Emicon RAS 601 S KP, , 60 Kw cooling capacity , 17.7 Kw. Electrical Power, Amp 51 YOC 2018 Refrigerant R290 Weight 1.062 kg.
Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg
KSB Water Pump Movitec VF 10/11 -L B Pump from 2022, as good as new, complete 2 available. 4 KW, 10 m3/h, 89 m Manufacturer: KSB Model: Movitec VF 10/11-L B Serial Number: 1750863-1 Type: Water Pump Power [kW]: 4 Flow rate [m3/h]: 10 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 70
Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,
V22 - used approx. 30 m³ / 30,000 litre V4A stainless steel tank, horizontal tank on pedestals. technical details: capacity: approx. 30 m³ / 30,000 litres material: stainless steel, probably V4A, we can have this tested upon request dimensions: approx. L total 6.50 m / L tank 6.00 m × Ø 2.50 m / H total 3.00 m Used stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank on 2 fixed, welded stainless steel bases, lid on the top of the tank (68 cm) and on the side, several inlets and outlets. On the flanges it reads V4A 1.4571, see picture. This stainless steel tank can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, manure, potato steam trays, leachate, rapeseed oil or as a rainwater collection tank, etc.. Pictures from the inside to follow. Unfortunately there is no type label. Price upo ...
Chiller made by Linde Self-made for low temperatures, goes down to minus -25 °C, with two refrigeration circuits. With two Bitzer 6G-30.2Y compressors as main compressor and two 2N-7.2Y compressors as subcoolers. Bundle tube heat exchangers, condensers, etc. Compressors have been renewed.
STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...
Glycol cooler, water cooler, water evaporator, Küba SGB 132, 70 liter capacity, two fans 710mm diameter, 920 red/min. 2.2 Kw. From a Fruit Warehouse, CA Warehouse In very good condition and fully functional. Fan very robust, south electric, 2.2Kw.
used
Recon Part Number: 0400 6472 12 cylinders Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.
Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge
Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels
Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle
new
KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3
Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Weight: 70 kg
Recon Part Number: 555 200 08 01 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg
Oil/water cooling system, KA 340/BWT B57x110, Bühler, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - The pump was used to cool an HFC mixture via the heat exchanger. - Cooling water is fed through the two connections on the left-hand side of the heat exchanger. - We have checked the flow rate of the heat exchanger, it is in very good condition. The system consists of: - Screw pump, Settima GR70-SMT16B-600L-AC-28B5G, Original price approx. € 4,100, Sales price € 1.750. - Motor, 7.5 kW, 400 V, AC Motoren GmbH - Includes SAE rubber compensator from 2 1/2" to 3 1/2", stainless steel - Includes stainless steel SAE 2 1/2" connecting pipe - Plate heat exchange ...
Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040 Catalog Number: ZAFS51040 Provides up to 800 L/day of clinical laboratory reagent water. Dispensing Flow 15 MΩ-cm, at 25 °C H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches) Tank volume: 90 L, integrated Total Oxidizable Carbon Residue (TOC):
MEMMERT WNE 45 + SV2945 - 45 liters Model: Water bath / WNE45 - Stirring system: SV2945 Temperature range: approx. 5 °C above ambient temperature up to +95° C Setting temperature range +10 to +95 °C Display resolution: 0.1 °C Capacity: approx. 45 liters Internal dimensions (WxDxH): 590 x 350 x 220 mm External dimensions (WxDxH): 818 x 516 x 401 mm Network: 230 V / 50 ... 60 Hz / 2800 W Weight: approx.: 26.0 kg Minimum fill level: 177 mm Maximum fill level 200 mm Digital timer from 1 min. to 999 hours for: ON (continuous operation) WAIT (delayed start) HOLD or HOLD depending on the target temperature with "holding time guarantee" With Memmert SV2945 stirring device Stirring device incl. support frame, with electronic frequency control 35 – 160 cyls min (linear amplitude) Year of manufacture: 2018 and 2019
1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...
New repair kit for a Volvo Penta TMD 122A cooling water pump List price of the package 650,-€ consisting of the following parts: 1 Piece Repair Kit 8767628 1 piece gasket 862596 1 piece gasket 422171 1 piece gasket 423351 3 pcs hexagon screw 955542 10 pcs hexagon screw 955536 1 piece plug 968146 2 pieces of V-belts 966959
Water pump, new suitable for MAN D2842, cf. original MAN number: 51.06500.6470
Water pump with external coupling, without motor Type: VACST-L020107DIIG
Water Pump for MWM 232 for Sale MWM Part Number: 6.232.0.952.0020 ; 623209520020 ; 623203810470 ; 623207310010 ; 623409520090
Chiller Make: SYSTEMAIR Type: SYSCROLL 170 AIR EVO PH Power: 170 kW – cooling and heating Electrical. Power: 77 kW/150A Refrigerant: R410A Weight: 1,385 kg Year of Make: 2014 4 pcs compressor Make: Copeland Scroll Type: ZP182KCE-TFD-455 Volume: 35.1 m³/h Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
MWM 232 / 234 Water Pump MWM Part Numbers: 6.232.0.731.0010 ; 623207310010
A water mixing and dosing device from the Scheurer company from 2022 will be offered. The device is used, but in very good condition. Technical data: Manufacturer: Johannes Scheurer GmbH Description: Water mixing and dosing device Series/ Model: CENTRALINA/ DOSAMIXA Year of Make: 2022 Volts: 230 Frequency: 50 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, ...
Water Jet Pump Resato PJE-2-4000 Here there is a gebr. Water jet pump that has been standing around unused for over 10 years. The pump costs with an additional pressure converter and an additional control from a cannibalized pump 7,000,-- €. There are also about 100 HD seals. If you want to buy the print translators solo, they cost 1,500 €/piece There is no guarantee, warranty and to avoid misunderstandings the pump must be inspected before collection.
We sell here a water pump for M.A.N. 2842 with the part number: 51.06500.6598. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. With our modern engi ...
Sour Water Strippers (SWS-1 and SWS-2) (1981) Year: 1981 Two redundant units for removal/reduction of H2S and ammonium (NH3) from plant wastewater by using stripping steam. Year of manufacture 1981 Process Design by Shell Process Engineering by Comprimo B.V. Throughout for each SWS max. 1289 t/d (incl. 1,58 t/d NH3 and 2,82 t/d H2S) Operational operating temperature SWS-1 = 102°C, SWS-2 = 95°C Operational operating pressure SWS-1 = 0,1 bar, SWS-2 = 3,3 bar 2022 – Decommissioning
9482023 Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler features a durable, electronically controlled, water-cooled moving grate, designed to burn a wide range of fuels from wood pellets to wood chips and waste wood. Installed in 2012, the plant operated on wood pellets until December 2022. It is a complete system in good condition, housed in a concrete-element building, with two large pellet silos and a hot water accumulator tank for heat load balancing. These auxiliary components are optionally available to interested buyers. The boiler is equipped with load-controlled primary and secondary combustion air fans, as well as a speed-controlled exhaust gas fan, ensuring high combustion efficiency and low electrical power consumption. The two-stage combustion design minimizes NOx emissions. Its robust triple-layered ceramic and steel combustion ...
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Brinkmann Pumps, coolant pump from Matsuura MC 710V milling machine -Type: TB13/110-B6X -Power: 0.4 kW -Flow rate: 12 l/min -Dimensions: see photos -Dimensions: 175/155/H330 mm -Weight: 8 kg
Air/water heat exchanger for enclosure cooling SK 3210100, Rittal, used Top The cooler has 2 water connections for the cooling medium water. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good condition. It looks as if it has never been used. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warr ...
Flowtech Flowboost 2V JH1 water pump system with tanks 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph
IBS mobile water tanks provide large additional water capacity, which is especially important on construction sites and locations that are difficult to access or do not have their own water source. The tanks are designed for quick and easy lifting onto a truck using a hook-lift system, transport to the nearest water source, fast filling, return to the site, and easy unloading. Each tank is equipped with a high-capacity pump that enables fast filling and emptying of the tank. The pump can also be used for rapid filling of the tank from larger reservoirs or other available water sources. It is sufficient to connect the pump to the water source using the hose supplied as part of the tank equipment. In addition to standard models, tanks can also be manufactured according to special customer requirements. In such cases, the customer defines the tank dimensions and pump capacity accordin ...
Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun, cooling unit -Manufacturer: Deltatherm, Deltatherm -Type: DE-HI -Power: 1.7 kW -Individual components: see photos -Dimensions: 1300/800/H1760 mm -Weight: 321 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 15 kW 980 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 1140/470/H505 mm -Weight: 331 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 11 kW 1470 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 940/400/H425 mm -Weight: 169 kg
maximum number of results exceeded
please refine your search
