water treatment used for sale

Post of 9 stueck submersible pumps and dirty water pumps Manufacturer: Heath Pumps Pumpex (Sweden) Flygt Spt Soendgerath Power ratings from 1.5kw to 6.5kw Pumping capacities up to 120m3/h Foerderhoehe up to 80m Various controls for pumps also with operating hour counter, with float switch or with level monitoring New price of a large pump 4,500.-EUR The pumps were in use for a maximum of 3 years and have been stored ever since. Special price

GP115 - used approx. 40 m³ / 40,000 litres polyester tank / GRP-tank, Staffelstein tank, aboveground, lying on two steel pedestals, good condition. capacity: approx. 40 m / 40,000 litres material: polyester / fiberglass length: approx. 6.50 m diameter: Ø approx. 3.00 m height including base: approx. 3.50 m Manufacturer Staffelstein, horizontal, round storage tank on two steel pedestals, access on the front side, multiple connections, in- and outlets as shown in the pictures. The container can be used as a storage tank for many different media such as water, liquid feed et cetera, or as a rain collection tank. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this ta ...

GS11 - used approx. 40 m³ / 40,000 litres steel tank, insulated container tank with heating coil, former palm oil tank, in good condition. Aboveground storage tank, lying horizontally, insulated container tank, former palm oil tank. Technical details: year of construction: approx. 2007 total tank capacity: approx. 40 m³ / 40,000 litres capacity at max. filling height: 37,000 liters (decrease due to the insulation) dimensions incl. insulation: h 2.10m, w 2.50m, l 9,50m weight: approx. 7.5 t material: S235JRG2, single-walled steel tank with 80 mm of insulation certification mark: Z-38.11-143 tested pressure inside storage space: 2.73 mH2O other: incl. forklift pockets at the tank bottom and crane eyelets on top for transport, incl. inside heating coil. The container is used, has been emptied and professionally cleaned inside. Corresponding to the age there a ...

Manufacturer: Imes-iCORE Type designation: iCUTwater ECO Year of constr.: 2017 Work area: 620 x 1000 mm Die heads: 1 2 1/2 D, 2D or 3D: 2D Hours of operation: 20 Dimensions: Dimensions of 2150 x 1615 x 1964 Power: 7,5 kW Power supply: Bar: 1500 bar Hedging in Amper: 32A Hours of operation: 20 Integrated pump directly driven built-in pump "Tilo Klett" with 1500 bar / 2 l / min and cutting head Allfi X-type, sand Raddosierer type Jetcut,. integrated reservoir sand 25 kg. Designed for Fokusierrohr 0,90 mm and nozzle 0.30 mm. Incl. control software and post processor on the machines notebook.

Water tanks for crop sprayers, standing or lying flat, 3,000 L, 4,000 L, 5,000 L, 6,000 L and more. Used polyester tanks / GRP-tanks, water tanks, barrels, storage containers for field sprayers. We offer vertical or horizontal tanks, round or square shape, made from robust fibreglass, with several in- and outlets for filling your sprayer. Our tanks are used, have been professionally cleaned and are in good condition. The containers can further be used as storage tanks for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, for rainwater collection and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already bee ...

Electronic water dosing device with temperature display Your advantages: fast and exact input of the water quantity Clear control panel with large, bright display compact and flour dust-proof stainless steel housing easy connection to an ice water system with Automatic Wiedehol Technical data Dosing volume range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 ltr./min Water connection: 3/4" external thread Power connection: 100 - 240V ; 50hz Dimensions W x H x D: 200 x 300 x 130 mm Visit our Milbrandt Outlet with many bakery machines and appliances!

CIAT LG-LGP 900Z Product number:M18-4309 Cooling capacity:249 kW Refrigerant:R407C Refrigerant Content:12,3 + 13,3 kg Voltage:400 Volt Power consumption:67 kW Dimensions:2200 x 900 x 1700 mm Weight:1223 kg Year:2004 Number in stock:1 piece(s) Price:Quotation request Very nice water cooled Ciat water chiller with 4 scroll compressors distributed over 2 circuits. Mentioned capacity at a water temperature of +12/7°C (inlet/outlet) and an condenser water temperature of +30/35°C (inlet/outlet). Visit also our website: used-refrigeration

Flygt pumps model 3085 Top quality! Steel case, stainless steel shaft 2 kW 1395U RPM Flow rate corresponds to ca 30 l / s 1800 l / min Total length ca. 80 cm, 60 kg Very good condition! â?¬499 This is not a DIY part, these pumps are offered usually for twice. Preferred site 76829 Landau, pick up, delivery possible

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

Steel tank, used approx. 100 m³ / 100,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 100 m³ / 100,000 litres material: steel tank dimensions: approx. Ø 2.9 m x 15.8 m long weight: approx. 17.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possib ...

Sala cyclone pump DN 150 mm Drive 30 kW Pump and rotor in good condition

Lowara pump FHS 100-200/300 ELP 120-310m ³/h 47m - 22, 6m, P2 30KW, incl. non-return valve and line reducing valve

P123 - used approx. 3 m³ / 3,000 litres polyester tank, GRP-tank, aboveground, vertically standing, on steel frame, in good condition. technical details: capacity: approx. 3 m³ / 3,000 litres material: polyester / GRP manufacturer: Erka dimensions: approx. h total = 2.30 m / w = 1.10 m / l = 1.60 m Used storage tank in good condition, standing, hatch on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in  ...

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

5 PCS AVAILABLE BRAND FRIGEL MANUFACTURED 2007 CONDITION USED - IN WORKING ORDER QUANTITY AVAILABLE 5 UNITS MODEL RCD180/24 (180 LTS PER HOUR) TEMPERATURE RANGE 23 TO 194 F (CELCIUS -5 TO 90) VOLTAGE 400 VOLTS FREQUENCY 50HZ SHIPPIING WEIGHT 395.00 Kgs MAX CURRENT 52 AMP FLUID H20 MAX PRESSURE 8 BAR REFRIGERANT R407C HIGH PRESSURE 27 BAR LOW PRESSURE 22 BAR abc.FRIGEL.IT

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

Hot water high pressure device, 210 bar, 960 L / h, detergent tank, high pressure hose 10 m, gun, double spray Lance.

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

Year of manufacture: 2004 Engine: PSI 4.3 L., 6 cylinders, 133 K. M. Drive: 4 x 4 Fuel: Propane/gas Transmission: Automatic Water tank: 936 L. Snow tank: 2.91 cm3 Weight: 3190 kg. Condition: excellent

- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...

Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!

CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...

Water basin heated according to photos. 230Volt, 1,200Watt Sthf0o Heating infinitely adjustable from 0-100%. Lows in different sizes to cover the water surface.

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

Machine type water circulation cooling unit Merkle brand Type WK 370 Plant No. 38.118 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 700 x 370 x 285 mm Weight 28 kg Age approx. 10 years Condition workshop tested very good Warranty 12 months from the date of delivery Original price 1.200,00 € + VAT Price 675,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our ...

Machine type water circulation cooling unit Merkle brand Type WK 230 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 610 x 230 x 215 mm Weight 18 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg

Machine type water circulation cooling unit Merkle brand Type WK 200 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 590 x 200 x 210 mm Weight 15 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Chiller Green Box Twin 61 2006 year Price 4.500 Euro probably damaged evaporator // controller - o.k. // two compressor - o.k.

Haake water bath F3 thermostat thermal bath water bath temperature 20°-270°C Manufacturer: Haake GmbH Type: 001-4202

Net cooling capacity: 50 kW Operating Weight:435kg Refrigerant: R410a

Make: GÜNTNER Type: S-GVH 101 B/3 S Built: 1995 Power: 230kW Volume: 142 litres With subcooler Type GVV 066 C/1 L Volume subcooler: 20.1 liters With 3 fan condenser (1000mm) + 1 fan subcooler (x650mm) 3 pieces Available Price on request Contact details can be found under Contact

P213 - used approx. 30 m3 / 30,000 L polyester tank, GRP tank, Speidel tank, standing, flat bottom. Technical details: Content: approx. 30 m3 / 30,000 litres Material: Polyester tank / GRP tank Manufacturer: Speidel Tank- und Behälterbau GmbH Dimensions: approx. 3.00 m x approx. 4.60 m high Other: Used polyester tank in very good condition, manufacturer Speidel. Vertical flat bottom tank, dome at the top of the roof, several connections, incl. filling line. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato vapour bowls, molasses, manure, seepage juice, rapeseed oil or as a rain collection tank, etc. Price on request. Transportation can be arranged cheaply. We can also rework the tank as desired, please ask us. It is not possible to update all our listings daily. As our stock is constantly changin ...

Make: THERMOKEY Type: 46 W2 54 3 7000 21 41 C T Year built: 2010 Power: Volume: 242.6 litres Pressure: 10 Bar Max Temperature: +120 °C Min. Temperature: -40 °C Fan: x 900mm 4 pieces Available Price on request Contact details can be found under Contact

Make: YORK Type: YCSA-150-TP-380T BLUE FIN Year built: 2010 Power: 155kW Coolant: R410A 4 pieces Copeland Scroll compressors 4 pieces of fans 2 circles With WILO circulation pump 1 condenser is leaking! Price on request Contact details can be found under Contact

Make: YORK Type: YCAA B 210 LN Power: 149kW Refrigerant: R407C 4 compressors Make: YORK Type: 015-02874-992 Pressure: 25 Bar Max temperature: 63°C Min. Temperature: -35°C Price on request Contact details can be found under Contact

Spectro CIROS CCD Water Analyzer - Height: 105cm - Width: 150cm - Depth: 75cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Water cooler Delta DKS 110 -220 volts -0.7 kW

KW Set Lufcooled AERMEC Techn. data Aermec: • Type NRA 1500 • Cooling capacity: 390 kW • Y.O.M.: 2004; • 6 x fans; 6 x Danfoss Scroll Compressor • R 407 c; 2 circles a 44 kg; • Dimensions: B 2.2 x L 4.3 x H 2.6 m plant ran until the last, was serviced until 2019; was used for indoor air conditioning.

Pressure atmospheric maximum: 4000 bar X - axis: 3000 mm Y - axis: 2000 mm Sheet thickness: 0,00 mm Number cutting heads: 0   CNC Brand: _Unknown / Other CNC Model: Flowcut FLOW - MACH3 3020B CNC Waterjet 3000 x 2000 x 4000 Bar MACH - ID 6372 Make: FLOW Type: MACH3 3020B Control: FLOWCUT YOP: 2013 Hours: 3000 Working area X Axis    3.000 mm Working area Y Axis    2.000 mm Working area Z axis     178 mm Power resonator            4000 bar kW / Amp Feed rate X-Axis           12.700 mm Feed rate Y-Axis            12.700 mm Feed rate Z-Axis            12.700 mm Control            FLOWCUT Cutting hours     3000 H Linbear straightness a ...

Available on stock immediately Available single and double versions in Recon and Used

Immediately available in recon or used

100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in  ...

90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + easy & fast installation & operation + Housing made entirely of stainless steel + can of course also be combined with an ice water system + Device automatically opens the required water supply, hot/cooled water + performs the right mixture until the desired temperature is reached + powerful electronic system, microprocessor-based + Water dosing from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + digital display of water temperature and quantity + Temperature is set with thermostatic mixing battery (rotary knob) + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x drain hose (2 meters length) with hook Technical data: - Dosing quantity: 0.1 - 99.9 litres or 1 - 999 litres - Temperatur ...

80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN  ...