water treatment used for sale

Capacity 18.900m3/h, Equipped with filters, electric heating, capacity 138kW, control cabinet including air ducts, duct dimensions at filter unit 800x800x800mm, ducts installed at a height of up to 17 meter, approximately 75 meter of air duct in various dimensions, Used floor space approximately 9800x3300mm, note: wall feed-through not included Auction-ID: A1-43459-29

Consisting of: 8 connected process modules : feeding, pre-rinse, blow-off, caustic bath, blow-off, flush bath with 4-step cascade rinser, acid, flush with 4-step cascade rinser, isolation and drying module, 2x Kampf” winder / unwinder unit with Boschert” safety chucks, 2-door electrical switch cabinet, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2008), powder dosing / mixing unit, 6-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, used floor space approximately 17.500x6000mm Auction-ID: A1-43459-18

Type: AHT 2150-ek-so, with 3 Annealing-drums, max. temperature 200°C, heated by electric tube radiators, capacity 84kW (24 x 3,5 kW) , flowrate 50.000m3/h, build in isolated housing, dimensions approximately 6800x4600x4000mm, 2-door switch cabinet with ”Siemens” touchpanel, 1x Sander” multi position winder type AFW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 1x Sander” guidance unit type ABZ-1400-1200-12 (2023), 1x Sander” (un)winder type ABW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 4-door switch cabinet, Used floor space approximately: 15.500x6000mm. Auction-ID: A1-43459-8

Equipped with nr. 2 material trolleys, loading platform, new spare gasket for the door. Internal compartment volume: 1.5m³; internal measurements: 1000 x 1000 x h 1500mm; internal capacity: 400 Kg; Rated temperature: 250° C; maximum absorbed power: 29 Kw. Serial: 90256 Estimated weight: 1200 kg Approximate dimensions: 1800x1500xh2550 mm 1400x1200xh1000 mm Auction-ID: A7-44996-55

Equipped with: 6 gates, divisible lengths 3000mm, and 6000mm, galvanized, tube round 90mm, on legs 900mm high center 1st tube, 2nd tube round 90mm at 1600mm high, total length 21000mm, 2 lengths with side brackets, 2 lengths smooth tube on legs, width between tubes walkway as built up 1100mm, width between smooth tubes 1400mm, already disassembled, mounting on concrete, or slatted floor. Auction-ID: A1-40134-95

Surface treatment line comprising of a manual infeed unit, Qui-Clean blow model DTH-701 surface cleaning unit, s/No 040, year 2001, Hotta model AP-0109ST-1 surface treatment tunnel with 2 zone electric heat tunnel with 8 zones plus cooline tunnel s/No N/A, Year 2001, rise and fall outfeed table including 5 x material trollies Auction-ID: A1-45187-10

Surface treatment line comprising of a manual infeed unit, Qui-Clean blow model DTH-701 surface cleaning unit, s/No 039, year 2001, Hotta model AP-0109ST-1 surface treatment tunnel with 2 zone, electric heat tunnel with 8 zones plus cooline tunnel s/No 00176400, Year 2001, rise and fall outfeed table including 5 x material trollies Auction-ID: A1-45187-9

"The Ahlbrandt FG-3102TT-LCD-PB Corona Treatment Generator is an industrial equipment designed for the activation of material surfaces, allowing to improve the adhesion of inks, glues or coatings during production processes. This Ahlbrandt FG-3102TT-LCD-PB model offers precise and reliable processing control, ensuring consistent performance on various substrates. Offered as is, it is an interesting solution for professionals wishing to integrate or recommission a surface treatment generator. With dimensions of 120 cm in length, 80 cm in width and 56 cm in height, this compact device fits easily into an industrial environment. Its weight of 66 kg is a testament to its robustness and ensures optimal stability during operation. The Ahlbrandt FG-3102TT-LCD-PB is therefore an effective tool for improving the quality and efficiency of surface treatment operations."

Water cooler tower,1 MW- 1,040 kW, 2pc, make BALTIMORE, each with 2 fan units, see photo.

Pure water unit ENVIROFALK Performance in continuous operation 15 sqm / h max 18 sqm / h CA 2 trailers full of material Year 2009 / was for 1 year in use then the production has been discontinued. complete with all documents and control New price 260.000,-€

Cooling unit, cooling water recirculating cooler, water cooler, chiller O. HellwigYear of construction: approx. 1995Cooling capacity approx. 6 kWNight cooling unit 3 kWaverse refrigerant R422DWasser tank capacity approx. 35 litresFlow volume circulation pump 40 litres/minPump capacity 0.63 kWWasser connections 1/2 inchMains connection 380 volts, 50 Hz- temperature setting via rotary potentioSpace requirement L x W x H 1100 x 750 x 140 mmWeight 285 kg; used

Cooling Unit Cooling Water Recirculating Cooler ARO Type VWK 31/1-SFabr. No. 0705384 year of construction 2007Cooling capacity 3500 wattsAmbient temperature max. 32CRefrigerant R407CCrefrigerant Capacity 0.98 kgOperating overpressure Refrigeration compressor max. 29.5 barWater tank capacity approx. 8 litresFlow volume Circulating pump 27 litres/min. (1620 litres/h)Water connections Quick-release coupling Rectus Type 26Mains connection 230 volts, 50 Hz, 2.2 kW- temperature setting via DANFOSS thermostat controller- built-in circulation pump (250

150,000 litres of V2A horizontal hard water/soft water tank Properties: Volume 150000 L Material V2A (AISI 304) 1.4301 Total height 4200 mm Inner diameter 3600 mm Overall length 13500 mm Cylinder length 12000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Description: Tank 1/2 - hard water tank Tank 2/2 - Soft water tank Tank crest: Ventilation nozzle Filling nozzle 2 CIP balls In front: Cone base Manhole 450 x 350 mm oval Residual drain with flanges with disc valve Thermometry Tank body: Reinforcement rings Behind: Cone base

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

Cold water set water-cooled, turbo-cooling machine, Carrier 19XR5556, R134a, 400V 50Hz,Bj 2001,ca 2500KW (700ton)Cooling capacity, little operating hours, always maintained,very good condition, super efficiency.

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Cat.-Nr. 11-370-2 new double jacket and insulated Volume: 2400 Litres - Parts in touch with product in AISI 316 – other parts in AISI 304 without Heating Jacket Material: Parts that come in touch with the product in V4A (AISI 316) – other parts in V2A (AISI 304) Max.Working Pressure. 0,49 bar Surface fully pickled, passivated and neutralised Insulation with Mineral Wool for Hot Water Tanks Thickness = 80 mm Standard Equipment: Manhole on the top Air Release and Pressure Valve in PVC Manhole inside oval 400 x 350 and Manhole outside rectangular for insulation jacket Sample Valve Level Indicator 24 mm Ladder Support Outlet Discharge with Outlet Pipe DN 50 Digital Thermometer Clear Outlet DN 50 Transport Hooks with Insert Heating Element 230/400V, 7,5 kW Diameter: 1350 mm Height: 3130 mm Cyl. Height: 2160 mm F ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

to see used Wasserenthaertungsanlage like in the picture! achievement: approx. 17m

to the storage of custom water / fire-fighting water. the container is used, emptied inside and cleaned expertly. he owns a manhole DN 600 with cathedral lid, two angschweisste feet and will provide outside completely with a new bitumen painting. L = approx. 10.70 m / D = 2.50 m / weight approx. 9.0 to. / ex works, freely charged. for the use as a fire-fighting water tank konnen we the container completely equip with a fire brigade suction connection, consisting of: -1 Stck. Suction management with A-firm coupling to German Institute for Standardization 14319 with special fastener for Feuerwehr-Dreikantschluessel - 1 Stck. Bleeder tube with bonnet - 1 Stck. Bearing pipe with bearing stick for measurement of the filling state - 1 Stck. Cathedral lid with screws and poetry. the suction management can be used as a filling and withdrawal pipe. the components are prep ...

to German Institute for Standardization 6608 - outside with bitumen isolation. L = approx. 10.00 m / D = 2.00 m / weight approx. 6.0 to. / ex works, freely charged. the container is used, emptied inside and cleaned. The container was amended in our work from the outside and was postisolated with bitumen mass. Nevertheless, insulating damages by transport can exist in the container.

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 40.000 liters used. The container is used and cleaned from the inside. Length: approx. 870 mm Diameter: approx. 2500 mm Weight: approx. 7000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . The tank system we offer freely loaded from the location Wars ...

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 60,000 litre single-wall insulated storage tank as follows. Rated capacity 60 cbm Piece 1 used but overhauled, i.e. the container is cleaned, externally insulated. Material steel, material S235JRG2 Documents Manufacturer's certificate / test certificate according to DIN and type plate Piece. Piece. 1 vent nozzle Piece. 1 filling nozzle Piece. Piece. Piece. 1 ladder Piece. Form. cylindrical storage container with feet/console Container dimensions Length approx. 12,680 mm plus insulation 100 ...

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

for the storage of hot water / firefighting water. Dimensions: 2.50 m = D - L = approx. 10.70 m The container is used, empty inside and professionally cleaned and is outside with a coat of bitumen / bitumen insulation provided. Light insulation damage caused by construction and transport may be available at the reservoir. Price from Söhrewald - free of charge-

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...

Raw water pump in Exchange

water cooler, table cooler, recooler make Güntner, approx.1000KW cooling capacity, Device with 12 fans,throughmeser 1000mm. 416 litres capacity. 12000mm length, 2400mm width, 1500mm height, 8 feet, weight 2950KG.

Raw water pump in Exchange

FOR SALE ALFA LAVAL ECOSTREAM OILY WATER CLEANING COMPLETE SYSTEM TO WHOM IT MAY CONCERN; WE VE COMPLETE SYSTEM ALFA LAVAL ECOSTREAM OILY WATER CLEANING SYSTEM AT OUR STOCK SYSTEM RUNNING HOUR IS ONLY 3HRS . IT IS BRAND NEW . , EPC 50, 15 PPM Alarm and all accessories PLS FIND DETAILS ON BELOW ALFA LAVAL ECOSTREAM ART-NO. 585420-01 AL R SA 52658 MADE IN ITALY 60 HZ FREQUENCY 440V SEPARATOR BRPX 307 TGD-71 ELECTRICAL BOOSTER EH-W25 L1500 YOB 2014 EX STOCK READY TO TRANSPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH SU. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

New Water trough for Heidelberg KORD 64

Flender engine, water cooled, with pump 3 ~ engine: ANWA-250ME-04 K No.: 3189850, IN the 2302, 1996 400 V VDE 96A 73.7 HP/55kW, cos. P. 0.87 50 Hz, 1475/min, th CI F, IP 54 DIN VDE 0530/91 DIN IEC 38/87, 0.530 t Cooling water consumption 15 l / min.

HT Water pump,Type WD-90L240 Kolmeks WD90L240 Part number: 191001

Thank you for your interest in our used machines we can offer you as follows: Many thanks for your interest in our second-hand machinery, please find below our offer: Manufacturer / manufacturer: National Lab model / type: 1000-1 Proficool UKT recirculating cooler/chiller chiller temperature controller Details / different: laboratory chillers ProfiCool UKT 1000 1 / almost good as new! Extremely quiet laboratory chillers with maintenance-free, air-cooled chiller. Heat exchanger made of brass. Control Panel with electronic controls with digital display (LED) as well as separate a / output switches for pump and cooling. External casing made of stainless steel. Filler for filling of the cooling circuit. Hose connections (olives) with a 12 mm outer diameter.

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Steel tank, used approx. 30 m³ / 30,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 30 m³ / 30,000 litres material: steel tank dimensions: approx. Ø 2.0 m x 10.0 m long weight: approx. 6.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possible to ...

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

Steel tank, used approx. 50 m³ / 50,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 50 m³ / 50,000 litres material: steel tank dimensions: approx. Ø 2.5 m x 10.5 m long weight: approx. 10.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possible t ...

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Staffelstein tank, good condition. Dimensions: H = 2, 00 m (tank) H = 2, 50 m (total) W = 1, 00 m L = 1, 60 m (tank) L = 1, 70 m (total) Overground, upright tank, incl. 4 steel feet/ cones, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personal ...

Make: GÜNTNER Type: GVH 080.1B/2x5-L(S) Built: 2005 Max Pressure: 32bar Min. Pressure: -1bar Max temperature: 100C min. Temperature: -50C Volume: 380.1 litres Price on request

Make: GÜNTNER Type: S-GVH 102C/2x5S Built: 2000 Max Pressure: 28bar Min. Print: -1bar Max temperature: 100C min Temperature: -60C (at 21bar) Volume: 400 litres Price € 10,500

S13 - used approx. 10 m³ / 10,000 litres underground tank, steel tank, firefighting water tank, cistern. technical details: capacity: approx. 10 m³ / 10,000 litres material: steel tank weight: approx. 3 tons dimensions: approx. Ø 1.6 m x 5.20 m Used steel tank in good condition, coated in bituminous insulation or bitumen paint, underground storage tank, lid and connections on the top. The tank has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport or the excavation may be present on the outside. This container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it  ...

Water pump MWM 620 RECON Part number: 1230 7597 / 1230 2820 / 1230 3401 / 1507 7822 Type 166R 6.440.0.730.011.7 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

New Part number: 0400 0685 6/8 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

BITZER / ALFA LAVAL L7SW1S12PP Product number:M19-4335 Cooling capacity:930 kW Refrigerant:NH3/R717 Refrigerant Content:80 kg Voltage:400 Volt Motor power:250 kW Dimensions:9.000x3.000x2.600 mm Weight:13.500 kg Year:2014 Number in stock:2 piece(s) Price:Quotation request Very nice and young Bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. This Bitzer chiller consists of a frequency controlled Bitzer screw compressor (brand Danfoss), WEG electric motor 250 kW, horizontal oil separator, oil cooler, combined economiser/liquid separator, Alfa Laval plate heat exchanger evaporator, Alfa Laval plate heat exchanger condenser, Grundfos speed controlled pumps and a control cabinet with Siemens PLC and touch screen. The above mentioned capacity is at +18/12°C in/out and a flow rate of 143,7 m3/h. and a cooling water supply +4 ...

Electronic water dosing device with temperature display Your advantages: fast and exact input of the water quantity Clear control panel with large, bright display compact and flour dust-proof stainless steel housing easy connection to an ice water system with Automatic Wiedehol Technical data Dosing volume range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 ltr./min Water connection: 3/4" external thread Power connection: 100 - 240V ; 50hz Dimensions W x H x D: 200 x 300 x 130 mm Visit our Milbrandt Outlet with many bakery machines and appliances!