135,867 used machines on RESALE, but how to find them? Machine Search
Water treatment plant Manufacturer: BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 BWT Osmotron water treatment plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production 1 piece of water treatment plant BWT Osmotron Plant of the company BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production, incl. • 90μm pre-filter with automatic backwash • Softening system in series operation (without hardening slip) and for 600 litre salt-plastic tank for regeneration • Heyl Testomat 2000 • 2 chlorine cells to reduce germs in the softeners • Reverse osmosis modules for 2000l/h • 4x SM20 EDI modules (electro-deionization modules) • Conductivity meter for permeate (after reverse osmosis module) Mettler Toledo • Conductivity meter for diluate (according to EDI modules) THORNTON 200 ...
Ultrapure water treatment, EDI SNOWPURE / ELECTROPURE / EDWARDS EDI XLBOC-500 YL3201003 used, tested ! Dimensions: 570 x 420 x 220 mm
Water softening system from Berkefeld: Ion exchanger for reducing calcium and magnesium hardness with 2 filter tanks and brine tank. Suitable for continuous operation. Year of manufacture: 1993 Capacity: 6000 l/h, Additional title: ion exchanger
Water treatment system consisting of: cation exchanger, reverse osmosis system, and pressure booster station, Additional title: Reverse osmosis system with cation exchanger and pressure booster station, Permeate capacity: 1100 l/h, Max. permissible pressure: 6 bar, Yield: 75 %, Salt retention: 98 %, Power: HD-pump 1,5 kW, 3,15 A, Frequency: 50 Hz, Length: approx. 2294 mm, Width: approx. 740 mm, Height: approx. 1220 mm, Weight: 200 kg, Features: Conductivity meter, fine filter, overpressure protection, high pressure pump, control unit, pressure booster station 2 salt dissolving and storage containers, 2 filter containers with nozzle rod and lower nozzle, central control valve with upper nozzle, control unit
Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display, Additional title: Reverse osmosis for desalination of raw water, Flow rate: 6000 l/h depending on the blending quantity, Max. operating overpressure: 14 bar, Recovery appr.: 82 %, Water: 5 - 7 m³/h; 1 - 10 bar, Operation / ...
Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpress ...
YEAR 2023. Equipped with 8 TW type disc filter units operating in parallel. Automatic cleaning system. Two pressure sensors measure the inlet and outlet pressure. SIEMENS PLC with HMI screen for system control.
v.v. (2x) iron removal installations; purification capacity 2-5 m3/hour (depending on the quality of spring water); working pressure adjustable 2-5 bar; incl. \"Joval\" Stainless steel pressure tank; capacity 200 liters; type 200 VIM; flow limiter; cap. 3.25 m3/hour; \"PWG\" water softener; capacity 257 litres; \"Fini\" mobile air compressor; type MK102-50-2T; cap. 235 litres/min. Auction-ID: A1-47368-3503
equipped with integrated cooling, climate control and Millipore AFS-18 water purification system, type: AHU 600/6 + Millipore AFS-18 Auction-ID: A1-50707-43
used
Ladies and gentlemen, Pictures and further information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place of jurisdic ...
: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7
Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new
Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg
Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device
2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...
Applications: Testing of skin elasticity Endodermic massage Electroporation Ultraporation Ultrasound Micro-cleaning
General Description Industrial vacuum heat-treatment furnace manufactured by MILCO , model VP 1350 . Horizontal front-loading furnace designed for controlled thermal processing of metal components under vacuum or process-gas atmosphere. The installation comprises the furnace chamber, vacuum pumping equipment, process piping and separate electrical control system. Technical Details Manufacturer: MILCO Model: VP 1350 Machine type: Vacuum heat-treatment furnace Year: 2016 Power supply: 380 V, 50 Hz Installed power: 120 kW Horizontal cylindrical vacuum chamber Large hinged front loading door with multiple locking clamps Internal heating / hot-zone assembly Internal material support / transport system Vacuum pumping system Leybold-Heraeus vacuum equipment Cooling and process-gas piping Nitrogen filling system Pressure instrumentation Separate electrical control cabinet T ...
Refurbished pre-treatment system with a warranty of 12 months. Further technical details on request
A treatment chair Ritter for a dental facility is available. Components: patient chair, dentist’s unit, assistant’s unit, operating lamp, spittoon, and ultrasonic scaler. The electronics have a problem. An on-site inspection is possible.
For Sale: Mahler Continuous Furnace with Güntner Cooler Mahler Continuous Furnace - Manufacturer: MAHLER - Type: DLE 800/220/3000 G - Heat Power: 172 kW - Nominal Temperature: 1120 °C - Year of Construction: 2014 - Certification: CE Güntner Cooler - Manufacturer: Güntner - Model: GFDC WD 080.1/14-42-3980105M - Year of Manufacture: 2021 - Volume: 133.6 liters - Max. Permissible Pressure: 10 / 0 bar - Permissible Temperature Range: -50 °C to +100 °C - Ambient Temperature Range: -30 °C to +50 °C - Fan: VT03061U.1 / 2448 / 630 min⁻¹ / 2.1 A - Test Pressure: 11 bar (Compressed air) - Test Date: 2021-03-15 - Fluid Group / State: 2 / Liquid Find more here - .ucymachines/ Contact us at - sales@ucymachines
Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage.
Manufacturer: Wagner Type of machine : Powder Coating System Year of Manufacture: 2000 The powder system consists of the following individual components: - 1x Powder coating booth – FBC – plastic booth with discharge conveyor - Cabin extraction system – 1x monocyclone 1x closed post-filter - 2x powder collection containers - 1x Powder Center - PZ - 2008 with its own extraction system - 8x Automatic Powder Guns – PEA – T2 - 2x hand powder guns – PEM – T2 - Control unit for automatic pistols – 8x PM 401 pneumatic module 1x PG 650 control module - 2x Control for handguns – EPG – 2007 in Tribo mode - 2x lifting devices – EBA – 3 - 2x electric sliding unit – VT – 1400 - Light strips – height + gap + depth - 1x external safety device – fire detection (Minimax company) - Find more here - .ucymachines/ Contact us at - sales@ucymachines
Fanuc manipulatierobot die een last van 700 kg kan hanteren Het heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter.
Manufacturer: Samco Model: FlexLiner II Year of Manufacture: 2018 Type of Machine : UCP plasma machine The samco-ucp FlexLiner II is a production type plasma cleaning system designed for surface cleaning of various types of leadframe packages. This system operates with a remote plasma source in the downstream process mode. The plasma is generated by RF power in the source and then injected into the process chamber through a shower head. Dimensions: 1,520 mm (W) x 1,410 mm (D) x 2,130 mm (H) Key Features and Benefits - Single substrate production equipment for various types and dimensions of substrates and magazines up to 300 mm x 300 mm - Gentle handling with minimal movement of substrates and magazines - Touchscreen GUI for user-friendly, intuitive operation - Multiple sensor controls for highly reliable operation - High throughput due to simultaneous (un)loading and plasma proces ...
Power supply 230 V Auction-ID: A7-51473-43
Voltage connection 230 V, power 1800 VA Auction-ID: A7-51473-1
Voltage connection 230 V, power 1600 VA Auction-ID: A7-51473-3
Voltage connection 230 V, power 1600 VA Auction-ID: A7-51473-2
Manufacturer: Heiche Sachsen GmbH & Co. KG, Leisnig, Germany Model: HEIS05 Year of manufacture: 2003 Major refurbishment: 2013 to 2018 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 2,200 x 700 x 350 mm - Max. workpiece carrier weight: 750 kg - Coating material: Aluminium - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 15,000 x 3,000 x 4,000 mm - Number of baths: 24 - Number of dryers: 2 - Number of loading/unloading stations: 2 - Transport system: 2 carriages Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Control voltage: 24 V DC - Total installed power: 190 kW - Total fuse protection: 224 A - Pneumatic pressure: 7.5 bar - City water consumption: 150 l/h - Demineralised water consumption: 150 l/h a ...
Manufacturer: Sidasa Type of Machine : ZT100+ Centrifuge System Year of Manufacture: 2017 Application: Zinc Flake Coating for Bulk Small Parts Includes: Associated Dryer CE Certified Technical Specifications - Maximum Coating Capacity: 7.5 tons per hour Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Heiche Model:HEIS01 KTL system Year of manufacture: 1982 Major overhaul: 2008 to 2013 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 1,240 x 800 x 600 mm - Max. workpiece carrier weight: 160 kg - Coating material: KTL paint (cathodic electrodeposition) - Coating thickness: 10 to 45 micrometers - Cycle time / throughput: 190 seconds per cycle (18 workpiece carriers per hour) - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 9,000 x 12,000 x 7,000 mm - Number of baths: 15 - Number of loading and unloading stations: 6 - Conveyor system: Chain conveyor by KEWESTA - Dip system: Lifting station by Klaus Sessler - Drying: Curing oven by Rippert Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Con ...
1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capac ...
Ultrafilter Laserpac LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ cleaner from the premium manufacturer Ultrafilter (Donaldson) This system has been specially developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries or electronics production. The system not only removes moisture in a 5-step process, but also cleans the compressed air extremely efficiently from oil vapors, particles and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow rate (at 5.5 bar g): Inlet approx. 36.3 m³/h | Discharge min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/environment ...
Machine was only used in research. Rarely used. Auction-ID: A1-51071-26
Reference: LVK-C EKANIS 160-3-2F. Auction-ID: A1-50340-57
High-pressure compressed air handling unit , mounted on a chassis and equipped with a temperature and pressure control device. Manufacturer: BEKO TECHNOLOGIES GmbH Type: AC 020-030 +35°C HP 060 Year of Manufacture: 01/2020 Serial Number: HP030.060.0120679 Test pressure: 143 bar(g) Maximum permissible pressure: 100 bar(g) Working pressure of compressed air: 60 bar(g) Operating temperature: +20 to +35 °C Maximum volumetric flow rate at the inlet: 30 m³/h according to ISO 1217 Power supply: 230 V / 1 Ph. / PE / 50 Hz Approximate weight: 210 kg Notified Body: TÜV NORD Systems Visible equipment: STÖRK temperature controller, pressure gauges, stainless steel piping and two pressure vessels Marking: CE 0045 Visible pressure vessels: Type: HD-B147.100 Serial numbers: 1470120470 and 1470120471 Unit volume: 7.7 liters Test pres ...
Used 9125023 Hamatech vacuum treatment device 380V (50Hz) Auction-ID: A1-50936-189
# Complete Industrial Compressed Air Production and Treatment System – Atlas Copco GA 250 VSD+ FF & BD 1400+ Overview Complete industrial compressed air production and treatment installation manufactured primarily by Atlas Copco, comprising a GA 250 VSD+ FF rotary screw air compressor, a BD 1400+ adsorption air dryer, filtration equipment, electrical control systems, pressurised vessels, ventilation ducts, pipework and associated auxiliary components. The system is designed to provide compressed air for industrial applications requiring air compression, drying and filtration. Its integrated configuration combines the main compressor with downstream air treatment equipment and associated distribution components. The lot includes the main compression unit, adsorption drying system, filters, electrical cabinets, control equipment, pressurised vessels, pipework, valves, inst ...
BILZ ThermoGrip 2200 ISG – Induction Shrink Fit Machine Brand: BILZ Product Range: ThermoGrip Model: 2200 ISG Machine Type: Induction Shrink Fit Tool Holder Machine Condition: Used Technical Specifications Description Specification Manufacturer BILZ Model ThermoGrip 2200 ISG Technology Induction Heating Application Shrink-Fit Tool Holder Clamping Tool Shank Diameters 3–20 mm indicated on machine label Heating System Electromagnetic Induction Control Electronic Control Panel Operating Modes Manual / Automatic controls visible Heating Head Vertical Adjustable Induction Coil Tool Holder Support Interchangeable Support System Auction-ID: A1-51153-95
Wassenburg MEDI-PLUS – Endoscope Irrigation / Pretreatment Pump Manufacturer: Wassenburg Model: MEDI-PLUS Name: Wassenburg Medical MEDI-PLUS MEDI 150 Included: Printer and cables Condition: Very good pre-owned condition, functionally tested Auction-ID: A1-51275-12
Located on the flat roof of the warehouse at a height of approximately 5 m. Customer must provide himself with a crane and necessary means of transport to remove the installation from the roof. See photos for evacuation. Technical sheet available Auction-ID: A1-49565-11
maximum number of results exceeded
please refine your search
400 € 
