127,395 used machines on RESALE, but how to find them? Machine Search
MAZAK Laser Cutting Machine STX3015 4kW TOP CONDITION – OVERHAULED IN 2023 Year of construction: 10/2015 very well preserved, overhauled MAZAK laser machine with 4000W Panel format: 3000mm x 1500mm minimum installation area of 2.9m x 7.3m Small parts conveyor belt LAN/USB connection automatic nozzle change automatic focus position adjustment Quick piercing into thick materials Plasma sensor for stainless steel cutting Piercing sensor for piercing Burning sensor for monitoring when cutting structural steel Completely encapsulated machine cover no foundation necessary FE: up to 22mm VA: up to 15mm ALMG: up to 10mm Plastic possible incl. software incl. warranty incl. suction incl. commissioning + training =optional with fully automatic loading and unloading=
cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...
Brotschneidegatter, Fabr. JAC, Type Swing, Semi-automatic
Cone cutter Martin Tenon cutting and slitting machine Type T27 Speed of the milling shaft 3000 + 4500 rpm Height adjustment range of the milling shaft 145 mm Largest diameter milling tool 390 mm Maximum clamping height 135 mm Spindle diameter 40 mm Milling motor 5.5 / 7.5 kW Speed of the cut-off saw 3000 rpm Height adjustability of the cut-off saw 190 mm Maximum cutting height cut-off saw 100 mm Maximum saw blade diameter 350 mm Lateral adjustability of the cut-off saw 250 mm Engine power cut-off saw 1.1 kW Saw blade spindle diameter 30 mm Travel of the sliding table 1270 mm Shipping Dimensions Machine on pallet 670 kg 1800 mm x 1050 mm x H 1600 mm Sliding table on pallet 83 kg 1200 mm x 800 mm x H 1300 mm Stop rail approx. 10 kg 1860 mm x 160 mm x 160 mm
Bread slicer, Fabr. Berkel
Brotschneidegatter, Fabr. MHS, model BM 45 NU
Durchlauf - Schneidegatter, Fabr. Delta
Brotschneidegatter, Fabr. Rego RMT, Type EMT 10, semi-automatic
Bread slicer, Fabr. Herlitzius
Not complete, compression pressure gauge. Auction-ID: A1-48031-208
Inv. Num. : 6794 Type: 3015 Producer: BODOR Created: 2023 Parameters: Laser power: 12 kW Working table length: 3000 mm Working table width: 1500 mm Machine weight: 9000 kg
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
equipped with duo hose and pressure gauge, including bottle cart Auction-ID: A1-48031-74
Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included
cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...
WITHOUT cabinet Auction-ID: A7-48588-28
Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!
we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.
Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Universal Thread Cutting Head 1/8 to 2 inch -Pipe size: 1/8 to 2 -Bolts: 1/4 to 2 -Dimensions: 280/240/85 mm -Weight: 5.8 kg
M. No.: 7061504 Format (cm): 78 Equipment / Additional information: Side table, air table, 1x reserve knife
ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...
Key data: 3000 mm, 1500 mm, 6000 W
3000 x 1500mm Dynamic Edition
maximum number of results exceeded
please refine your search
20 € 
