water chiller 50 used for sale

Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm

Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer

Fire basket, fire baskets, fire pit, fire bowl -Square -Material: Steel -painted: Black -Number: 2 baskets available -Price: per piece -Dimensions: 500/500/H560 mm -Weight: 22 kg

Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Transnorm conveyor belt GF 2600-600-500 RA2237 Technical data: Conveyor length (NL): 2600 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s ...

Transnorm conveyor belt GF 2670-600-500 RA2068 Technical data: Conveyor length (NL): 2670 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/Th Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2670 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0 ...

Used GANDRA TEC 500 + Bag-in-Box filling machine: 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit and vegetable juices, wines, etc. Supported packaging: 3 l, 5 l, 10 l, 20 l. The bags are introduced automatically from a belt or manually. Vacuum generation and nitrogen injection after pouring are standard. Equipped with a filled bag counter and a liter counter. Filled bags are collected manually in machines. Producer: Gandra Model: TEC 500+ Year of production: 2017 She recently poured NFC apple juice Capacity: Up to 500 3 liter bags per hour • Power supply 400V/50Hz; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW 2 pcs available

Hand wash basin with sink, wash basin -Stainless steel sink -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available -Price: per piece -Dimensions: 700/500/H445 mm -Weight: 9.1 kg

Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Key data: 500 mm, 350 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W

Position transducer, actuator for valves, valve drive, actuator, servomotor -Type: T 100 a 502 -Weight: 0.3 kg

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Roller conveyor, conveyor belt, roller track -not powered -Roller conveyor: on wheels -Roller width: 500 mm -Transport length: 1500 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Total height of roller conveyor: 210 mm -Dimensions: 1500/625/H210 mm -Weight: 42 kg

Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel

Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

Manufacturer: York Type: YCWZ44CBO-50PA Year of construction: 1997 Machine weight: approx. 1700 kg Dimensions of machine approx.: Length: 3050 mm Width: 1100 mm Height: 1620 mm with control cabinet from the conversion of buildings

Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185/H13 mm -Weight: 1.4 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Mauser, calipers, vernier calipers -Measuring range: 0-500 mm -Vernius: 0.05 mm -Dimensions: 655/157/H11 mm -Weight: 1.0 kg

Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tool, step claws, low clamps, clamping irons, clamping brackets -Clamping tool: clamp -Shaft: Ø 40 mm -Dimensions: see photos -Total dimensions: 505/100/H145 mm -Total weight: 12.7 kg

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection  ...

Transnorm conveyor belt GF 11380-600-500 RA2095 Technical data: Conveyor length (NL): 11380 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change,13 - 32 m/min Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11380 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Servo drive, controller, converter, controller, controller adapter base -Manufacturer: Siemens, Controller Adapter Base Series 500 -Type: 500-5840 -Dimensions cardboard: 500/250/H180 mm -Total weight: 2 kg

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Key data: 500 kN

Injection moulding machine Arburg 270 D 500-210 with control cabinet, functional, built in 1990, power 20kW, weight 1,850 kg, Clamping force 500 kn

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg

A3FLEX 500ML PRISMA FILLING LINE WITH 330ML PRISMA KIT FOR SALE Item #: Usm-199 Category Tetra Pak A3 CF/Flex A. A3 Flex 500ml and 330ml Prisma Filling Machine Machine Type : Tetra Pak A3 Flex Manufacturer : Tetra Pak Packaging Solutions Spa Year of Manufacture : 2010 B. Helix Accumulator Machine Type : ACHX10-0400-35 Manufacturer : Hartness International Year of Manufacture : 2010 C. CAP 30 Flex Machine Type : CAP 30 Flex Manufacturer : Tetra Pak Packagin, Modena Italy Year of Manufacture : 2013 Condition: Excellent and still on production. Tetra Pak maintained

Stock number: 3876 WELDING TURNTABLE Manufacturer: ESAB, Type: MLA 500 Machine NO.: 414767 Specifications: Large workpiece weight 500 kg Infinitely variable table rotations. pr/min Horizontal / Vertical Length: 1200 mm, Height: 800 mm, Width: 800 mm, Weight: 500 kg

Hydraulic power unit MTS 507.05 with control cabinet Pmax: 210bar Qmax: 40L Rated Current: 50A Year unknown, AEG Motor Water Return Cooler

Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm -Weight: 98 kg

LWB Steinl Injection Machine Type VCE -T 500/160 T Clamp power 500 KN Injection volume 160 cm3 Year 2006 6 Bar 400 v 50 hz 26 KW

Data light barrier, reflective light barrier, light barrier -Manufacturer: Visolux, data light barrier type LS 500-DA-IBS/F2 -12-30 V DC -Quantity: 3 pieces available -Price: per piece -Dimensions: 250/120/H140 mm -Weight: 2.1 kg/piece

Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg

Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 15,100 mm Number of shelves per row of shelves: 05 pcs. Number of levels plus floor level: 06 pcs. Volume Specifications: Pallet spaces per field: 21 pcs. Pallet spaces per row: 105 pcs. Total pallet spaces: 105 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanized Type: 100|30 Profile dimensions: 100 x 100 x 3 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled (bolted truss) 12,500 mm high 1,100 mm deep 60x Pallet rack crossbeam, used Material colou ...

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg

cutting width: max. 375 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw -------------------------------------------------- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to ...

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg

From an operational resolution: Zagro UVB Z 500 S YEAR OF MANUFACTURE unknown 380 VOlt Emergency stop Saw rollers Ø 500 mm Cutting length 700 mm Cutting width 450 mm Cutting heights 530 / 650 mm Saw blade lengths 3720 / 3920 / 4120 mm Table size 1000 x 800 mm AC 230 V / 16 A Width 1000 mm Total height 1800 mm Total weight 180 kg ----Engine cover is missing--see photo---