washing line used for sale

Manufacturer: Menzel Type of Machine: Washing Line Year of Manufacture: 2013 Technical Data Fabric Type: Warp knit, lace, Raschel goods, tricot Material Composition: - 100% Polyamide - 100% Polyester - Polyamide/Spandex (Elastane up to 30%) Dimensions & Weight: - Material Width: 2,200 – 3,200 mm - Roller Width: 3,400 mm - Fabric Weight: 50 – 265 g/m² Performance: - Production Speed: up to 40 m/min - Process: Spun oil removing, water-based washing Chemicals Used: - Oil-emulsifier - Washing/wetting agent - Alkali - Acetic acid for pH neutralization Steel Grades: - Lateral Frames: AISI 304 (V2A) - Parts in Contact with Media: AISI 316 (V4A) Machine Specs: - Unwinder Diameter: 1400 mm - Winder Diameter: 1800 mm Power & Utilities: - Voltage: 230/400 V, 50 Hz, 3 Phase - Steam Pressure: 4 – 6 bar - Compressed Air (Oil-Free): 6 – 7 bar - Water Pressure: 2 –  ...

Output Capacity: 3000 kg/h // Material : PET

PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLES STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, capacity: ca.500 kg/h depending on material and contamination

Manufacturer: Walter Metz Type of Machine : Container Washing System Condition : New Compatible with pallets and large four-wheel containers (660L & 1100L) Find more here - / Contact us at -

TBVE (TVE-ESCALE) ESCALE – Three Bath Open Width Washer Model: High Efficiency Washing Range (Washing Range – ESCALE) Manufacturer: TVE-ESCALE (TBVE Group) Year of manufacture: 2023 Condition: Good, fully operational Configuration: 3-bath open width washer with 3 evacuation (vacuum) slots – one per scour bath Documentation: Manual available Status: Available for sale Three heated wash bays, counter flow, working width of 2800mm fabric specs of 100gsm – 400 gsm (can be used on heavier cloth successfully) all plc controlled with three evac slots (one on each wash bay) input from roll or plated, output plated. --------------------------------------------------------------- Machine Description The TVE-ESCALE High Efficiency Washing Range is an industrial open-width textile washer designed for high-quality washing, scouring, and bleaching of fabrics. The system combines bath ...

General SKU322S570 MakeQVF Glastechnik GmbH (D) LocationBarneveld TypeWashing, dissolving, filtering, precipitating and recovering installation Pressure Working pressure0.3 Bar Vacuum possiblecheck Main Features MaterialGlass Motor0.37 KW Specified Features - Glass-lined Reactor MaterialGlass Glass Reactors Capacity120 ltr (4x), 110 ltr. (1x) Vessel sizesdia. 595x480m (4x), dia. 400x750mm (1x) Max. temperature20 degr. C With propellor stirrer0,37 kW 230/400 Volt 175-775 rpm With paddle stirrercheck Motor0,25 kW 230/400 Volt Speed mixing shaft110-630 rpm Information No.155153/2214 Year of construction1995 Mounted on legsframe With switchgearas is Floorspace4,6x2,0 M Total height2,3 M Weight1800 Kg Extra SpecificationsQVF Glasstechnik Washing, dissolving, filtering, precipitating, and recovering installation The entire installation is built in a tubular steel  ...

Type: Washing Machine WB 40 Fully insulated machine Nominal capacity up to 60 cycles/hour Electric/steam heating Blocked filter sensor Outside dimensions: 170x270x230 cm Delivery time: 30 working days after payment

Designed for washing smoking sticks for hanging meat and sausages with length to 1000 mm. Machine dimensions(LxBxH): 1400 x 900 x 1460 mm Water connection: ¾ ”; 4-6bar, 50...60°C; Electrical connection: 400 V/ 50 Hz Installed power, kW 1,65 Capacity pcs./h 600

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

Kronen GEWA5000 V, Washing machine GEWA 5000V PLUS with vibration outfeed (product outfeed over vibration screen) for bigger capacities, for example approx. 600-2500 kg per hour, depending on the product., Efficient and gentle washing of lettuces, vegetables and fruit by means of adjustable water rotation.

KRONEN GEWA 2600V – Fully Refurbished Vegetable Washing Machine, We are offering a Kronen GEWA 2600V vegetable washing machine in excellent condition, fully refurbished and ready for immediate use., Refurbishment Details:, - Completely overhauled by professionals, - Fitted with a brand-new original pump, - All parts inspected, cleaned, and tested, - Machine runs smoothly and efficiently, Features:, - Efficient vegetable and salad washing system, - Gentle product handling through whirl washing principle, - Made of high-quality stainless steel, - Ideal for food processing companies, - Location: Emmeloord, Available Immediately, Invest in a high-quality machine with the reliability of KRONEN – now with the added value of a full refurbishment and a new pump!, For more information, photos, or to schedule a viewing, please contact us.

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.

Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I ; working condition

Nr. 03 SINGLE-OVITE EXTRUDERS DIAMETER 100 Nr. 01 HEAD CONSTRUCTION 2 LAYERS

A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading

Different kind of sheeted and rolled breads. Niittypitko 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku, 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system Product specification: Manufacturer: Rademaker Holland Type: Crusto bread line Year: 2008 Voltage: 3 x 400 v + N + Pe, 50 Hz Control voltage: 24 Vdc Power consumption: 21, 9 kW Inom: 41 A, max fuse 50 A Avarage air consumption: 196 nl / min Max air consumption: 548 nl / min Dimension: L 21 000 mm, W 3000 mm, H 6000 mm

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

round bread bread baking line, description: round loaf bread baking line; consisting of 1 stainless steel dosing machine brand Shadowtotal dimensions . approx. 1800x1100x1500mm; equipped with hopper and cutting machine; 400V; 1 conveyor belt, 5-storey; tire width approx. 350mm; total dimensions . approx. 6500x600x700mm; equipped with CPG induction motor; 1 stainless steel 2-piece flattener; 1 stainless steel 13-storey walkthrough proofer; tire width approx. 600mm; total length approx. 7500mm;

Rademaker / Rondo ‘salmon en croute’ line Rademaker block processor with Rondo make up line. Has been producing ‘Salmon en croute’ for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours.

Used line for the production of chocolate "bodies". Year of production 2008. The line includes: - acid-resistant tank with a capacity of 1000 L - 250L double ribbon mixer - CFA 3 body molding machine - TCH-600 pre-cooling tunnel

SCHNELL SHEAR LINE 300 rebar cutting and bending line was built in 2008 in Italy by Schnell S.p.a. The electrical installation was overhauled in 2024. The SCHNELL SHEAR LINE 300 is a reliable system designed for serial machining of rebar with a maximum diameter of 50 mm. It integrates all the necessary equipment that is responsible for cutting, bending, optimising, storing and handling bars. The entire production cycle, from feeding to the collection of the finished parts, is performed fully automatically. The SCHNELL SL 300 stirrup production machine is fully complete and consists of the following components: – control console – FA/6/14 storage rack for steel – SCHNELL CGS 300 HDY guillotine shears – SCHNELL VBM 12/2 measuring and cutting track with single-sided unloading – SCHNELL ROBOMASTER 45 automatic rebar bending machine – rebar storage and retrieval system ...

CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

Linear rail with folding cam Height-adjustable for mounting on hole punches

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Pallet Production Line / SAS bracket line Three people are needed to operate the line and two people to operate the saws for cutting the supports Saw cutting can be further automated. Find more here - / Contact us at -

Finger jointing line The plant is from 2011 and the machines have been delivered NEW by HOWIAL. The Cook Bolinder is a used, old but very robust machine. Some electrical devices have been replaced. Item Description 01 HOWIAL - Dump unstacking SH/4t for lifting the raw wood pile to the required working height working height and semiautomatic separation of the wood of the wood stack. Both battened and unbattened stacks can be separated. can be separated. With inclination possibility for tilting the stack of wood up to 45°. Tilting and lifting of the stack by electric motor drive. drive. stack dimensions max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest lumber length 2,5 m 02 HOWIAL - lamella separation VE 1 for layer separation between tilt destacking and and roller conveyor to the crosscut saw. With pneumatically controlled tongues, on which the material is ma ...

Grinding line for frozen synthesis , Karl Schnell Packed , stored in Europe, ready to ship and install Featured for US CAPACITY Capacity up to 15 000 kg/h for the fresh process Capacity up to 8 000 kg/h for the frozen process Design for three shifts-operations 6 working days/week with 16 working hours/day RAW MATERIEL All raw materials temperature between -18°C and +15°C: - Pork and chicken liver - Pork pulmon - Atum viscera - MDM Max 19 000 cp @ 0°C Content : Pos.015 KS Lifting device DM-1500 type 632 Maximum load capacity: 1500Kg Designed for frozen raw material pallets Fitted with a safety fence Safety fence secured by 2 safety light curtains Pos.020 KS Breaker PB1 type 492 Single shaft breaker for frozen raw materials pallets Maximum height for frozen pallet: 1450mm Pos.085 KS Lifting device DM-800 type 632 Maximum load capacity: 800Kg Designed for Jumbo/ ...

2x 1991 Kettner, Palletizing lines Palletising line 1 & 2 manufacturer Kettner company Year of construction 1991 Overhauled 2009 STATUS Palletising line 1 2 Currently in operation, Mechanically regularly maintained and in operation CONTROL Currently in operation, but no more spare parts available on the market (therefore the entire system will be replaced) The system is ready for use again when the control unit is replaced Line 1 Empty pallet magazine Infeed conveyor Loader / palletiser Finished pallets’ conveyor line Line 2 Empty pallet magazine Infeed conveyor Loader / palletiser Conveyor line ‘finished pallets’ Find more here - / Contact us at -

WINE BOTTLING LINE 4.000 BOTTLES/HOUR - 28-station rinser - 28-valve filler - Corking machine with 6 heads - Bottle: Glass - Speed: 4.000 bottles/hour of 0,75l Find more here - / Contact us at -

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Index Table for Automatic Composition: - Belt dimensions: 2000 × 4000 mm. - Features photocells and a stop bar for pr ...

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curtains and hoods at the exit with temp ...

Serialization line for printing folding boxes of medicines Find more here - / Contact us at -

Description EXTRUSION TAPE LINE - Screw Diameter 120 mm - L/D 25 - BD Plast Screen Changer - Motor Power 130 KW - Calender 1200 mm - Slow Stretching Line 1000 mm - Fast Extension Line 1000 mm - Corona Treatment - Rewinder

Description PVC PELLETIZING LINE Turbo mixing line, turbo mixer Plasmec TRM 600, Cooler Plasmec RFO 1500, Scale for liquid additives Plasmec DGL 150.3 Twin screw extruder Bandera diameter 110HT L/D 22 Electric motor D.C 110 kW Universal screws suitabble for Rigid PVC an Soft PVC Hydraulic screen changer BDO 140 Vibrating granule cooller Stock mixer for granule Bagging machine for 25 kg bags

We are offering for sale a Weinig planing line consisting of: - Stacking system (x2) (can also be rotated 180 degrees) - Slat disposal - Isolation - Weinig Hydromat 22 – 7 spindles, up to 80 m/min feed speed ( new control) - sorting station - capping - Bundling Specifications: - Total line length: 35 meters - Total line width: 15 meters Find more here - / Contact us at -

Lumacon automatic crate filling line, Automatically feeding of 4 crates/ boxes per cycle., When the weight has been reached the conveyor belts will remove the filled crates and prepare 4 empty crates for filling., - Complete with inclined conveyor belts, - Buffer belts, - Weighing belts, - Multiple lines available from stock (Emmeloord)

BATTERING-GLUING AND BREADING MACHINE, STEIN, MESH WIDHT 200MM Technical features: Battering-gluer: Material: Stainless steel Power supply: 380V-440 / 50-60Hz Battering-gluer dimensions: 1200 x 700 x 2000 mm Breader, Stein, model: E8J Serial number: 184 Bandwidht: 200 mm Dimensions: 2400 x 750 x 2000 mm

We are offering for sale a packaging line , which remains in operation until June 2025. The line is designed for repacking 0.33L / 0.5L glass bottles into: - 6-pack open baskets - Quill boxes and dollies (SRP system Logipack, roller pallet) Output: 9,000 bottles per hour (bph) Condition: Fully functional and well maintained 1.Robot Cell Unloader PROFIROB-O-BOX A4/180 Type: MOTOMAN MH 180 II (6 axes) Commissioned: 02.01.2017 Manufacturer: Yaskawa / Profipack Year Built: 2016 2.Robot Cell Loader PROFIROB-O-BOX A4/180 Type: MOTOMAN MH 180 II (6 axes) Commissioned: 02.01.2017 Manufacturer: Yaskawa / Profipack Year Built: 2016 3.Bottle Carrier Uprighter Type: FTA-6/4-Z1-G5 Commissioned: 02.01.2017 Manufacturer: DokuConsult KG Year Built: 2016 4.Pallet Magazine Type: Typ 454 Modell LPMH Commissioned: KW 13 / 2002 Manufacturer: Krones Year Built: 2002 5.Deck Tray Insert ...

It is a used, reconditioned WP bunroll line type Rollmeister Basic Line SC 37 (without head machine) for sale. - line complete stainless steel design - The following products can be made: sliced rolls, round / smooth dough pieces, baguette rolls, hot dogs, ribs - Capacity range: approx. 3,650 pcs/h - Weight range: - round dough pieces (sliced) 40gr. – 65gr. - long-rolled dough pieces (cut and uncut) 40gr. – 65gr. - 3-row operation: 40gr. – 85gr. - round / smooth dough pieces over pretzel discharge 40gr. – 85gr. A WP Multimatic head machine can be offered on request. Price on request.

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered AS IS, WHERE IS., price options: as is, checked, lightly reconditioned, totally reconditioned

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 3 operators per shift, required space : about 30 x 22 mt., calculated on a 220 days/year 8 h/day = 3.520 T/year - 16 h/day = 7.040 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 2 Ton/h in input (throughput rate depends on feeding rate and on the kind of tires), installed power : about 650 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - available manual (20-25 tyres/h) or automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return  ...

Weinig high speed planing line 150 m/min with destacking, infeed system and outfeed system with automatic stacking system, Consisting of:, 01. Weinig cross chain transport for wood packages, 02. Weinig tilt hoist, 03. Transport belt for stacking sticks, 04 Weinig cross chain transport, 05 Weinig unchrambler, 06. Weinig cross chain transport, 07 Weinig automatic infeed system, 08. Weinig moulder Hydromat 30 XL, 6 spindles: B-T-R-L-T-B, max. 150 m/min, 09. Weinig transport belt, 10. Weinig outfeed system cross transport, 11. Weinig automatic stacking system, 12. Weinig cross chain transport for wood packages

We are offering for sale a used Krones carbonated bottling line. The line includes the following equipment: (there is no pouring machine it’s sold already) Bottle unloader – Kettner 1989 (Kontipack E), for returnable bottles Bottle washer – Krones 1988 Typ 150/10-110, for returnable bottles Capping machine – Krones Bottle capping machine – ADELSKI PP2010, 2007 Manual plug closer Champagne basket insertion machine – Nortan, Minerva 80-120, 1995 Decorative casing machine – Nortan, Prisma 1980s, 1994 Labeling and banding machine – Krones Taxomatic, KES-5, 1995 Labeling machine with self-adhesive labels – Krones Prontomatic, 1994 Bottle dehumidifier – Krones K745-D07, 2005 Palletizer – Packman (60ASS30), 2002 Pallet wrapping machine – Pablo, PL OW-2-OC, 2017 Pasteurizer Mixer – Krones 1989 Bottle loader into crates (12 bottles per crate) Transporters ...

Manufacturer:Flurial Type : Bag Packaging Line Year of Manufacture: 2001 - Output: up to 30 big bags per hour - Footprint: approximately 11 meters long by 3 meters wide - Height: approximately 3.70 meters - Currently used for filling big bags up to 180 cm in height and up to 1,250 kg in weight Find more here - / Contact us at -