wall used for sale

Manufacturer: G?kkaya Machinery Model: AKO?WALL EX KDH 10W Year: 2007 Type: Wall-mounted dissolver   ATEX classification: Ex 1/2GD cEx dem IIAT3 Weight: 500 Kg Diameter of mixing rotor: ? 200 mm Shaft length : 985 mm Up/down stroke: 1150 mm Raise/lower: hydraulic Sew Eurodrive unit: 1.5 Kw Loher motor: 7.5 KW

Type : Stirrer Wall support: manual Previous use: paint Motor power : 0,5 KW Classification: Explosion-proof GR.III Stirring unit: Turbine with inclined blades Mixing head diameter: 150 mm Mixing shaft length: 575 mm Up/down movement: 900 mm

Type : Stirrer Wall support: manual Previous use: paint Motor power : 0,5 KW Classification: Explosion-proof GR.III Stirring mechanism: dispersing tool Mixing head diameter: 150 mm Mixing shaft length: 575 mm Up/down movement: 900 mm

Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

Wall jib crane, indoor jib crane, indoor crane, workplace crane, wall mount, helmet rail mount, wall mount for swivel arm -Wall mount: for wall jib crane boom helmet rails or similar -Total height: 900mm -Dimensions: see photos -Transport dimensions: 900/200/140 mm -Weight: 17 kg

Used rear wall grille for pallet racks - approx. 1,500 x 2,780 x 30 mm Used lattice back wall from a pallet rack in very good condition. With this lattice back wall, you can secure walking and driving paths behind a pallet rack against falling stored goods. However, they can also be used for other applications, for example to secure machines or workplaces. These grids are also frequently used to demarcate storage areas or picking stations. Properties: - Used rear wall grille for pallet racks - To secure running areas - Dimensions: 1,500 x 2,780 x 30 mm - Mesh size: 45 x 45 mm - Frame painted in blue - In very good condition - Available or ready for collection by arrangement Properties: Frame color: blue Grille: galvanized Mesh: 45 x 45 mm Dimensions: Height: 1,500 mm Width: 2.780 mm Depth: 30 mm You can pick up this item by arrangement in our ware ...

Wall crane, jib crane, wall-mounted jib crane PAGUS Projection: 3950 mm Profile boom made of hollow steel section: 90 x 110 mm Swivel range: 180° Swivel point: 190 mm from wall 2 Mounting plates: 120 x 300 mm necessary wall area for fastening: 800 x 300 mm used, tested ! Dimensions: 4200 x 600 x 1200 mm

appr. 40 m³ / 40,000 litres palm oil tank, steel tank, insulated, double-walled, heating coil on the inside, above ground storage container, on 2 bases manufacturer: Dehoust year of manufacture: 2007 volume: 40 m³ / 40,000 L DIN: 6616 D /6601 serial number: 17 / 07 322 leak indicator: control fluid control fluid volume: 320L diameter: ø2500 tested over-pressure: 2 bar tested over-pressure for the double wall: 0,6 bar insulation: mineral wool appr. 10-18 cm, coated with aluminium plates material: inner wall S235JR, outer wall S235JR suitable for fluids harmful to water and for both combustible and non-combustible fluids inner heating coil The container is in used condition, according to the age there are traces of use. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is ...

Scattolini Flatbed for Light Commercial Vehicles Innovative flatbeds for light commercial vehicles Scattolini bodies are manufactured in modular construction. As a result, any repairs can be carried out quickly and without welding. The modules can be easily replaced with standard tools. All Scattolini bodies are equipped with aluminium side walls as standard. Product Standards • Plywood frame with non-slip resin protection of the surface • External lashing strips for tarpaulin fastening. • Completely retractable side and rear side wall locks that can be opened without any side protrusion • Anodized aluminum alloy side panels, 400 mm high, with profile in a new and exclusive design, hinge recessed into the side wall • Adjustable exclusive locks with anti-vibration device and automatic backlash compensation • The side wall locks are locked under tension to create  ...

PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production

Back wall grille for pallet rack , grid mat , kennel, lattice fence, wire mesh, lattice back wall Dates/ Price: 220 x 200cm = 60 € net, 71,40 € gross 220 x 150cm = 50 € net, 59,50 € gross Mascht : approx. 4 x 10 cm Galvanized Second-hand goods Holder piece. 10€ net --AVAILABLE MULTIPLE TIMES------

Unused wall swivel arm with manual suspension from VETTER VETTER PW1.25-4.0 wall swivel arm Projection 4 meters Load capacity 125kg Manual suspension VETTER SiCO-HF 500 Daytime capacity max. 500kg Carrier width 50mm - 220mm Comes from company dissolution Viewing and pick-up possible The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

specifications: - Air output: 6,000 m³/h - Pressing PA max: 500 Pa - Diameter pressure connection: 350 mm - Filter area: approx. 3.25 m² - Working surface (W x H): 2,080 x 1,930 mm - Area baffle: 1,800 x 1,800 mm - Dimensions of adjustable baffle plates (li + re): each 1,800 x 440 mm Engine data: - Power: 1.8 kW - Voltage: 380 V (star-delta) - Current: 3.8 A - Frequency: 50 Hz - Speed: 1,415 rpm - Transport dimensions (H x W x D): 2,500 x 2,000 x 800 mm (with pallet and mounted baffle plate and nozzles) - Weight: approx. 300 kg - Number of packaging units: 1 piece (on disposable pallet) The extraction wall was completely refurbished in our house and the fan was checked for its correct function. The extraction wall was completely cleaned and provided with new filter mats. Hint: Pipe components required for on-site operation can be requested from us. (Cha ...

The scope of delivery includes: 01x Rear wall grille, used Material color: similar. beige overall width: approx. 1,200 mm total height: approx. 1,100 mm Mesh size (outer): approx. 93 x 53 mm Mesh size (inside): approx. 88 x 48 mm Frame profile dimensions: L-profile 30 x 30 mm The rear wall grilles are rusted, partially the frame profile is damaged, see pictures.

Partition wall clamps, partition wall, end and intermediate plate, 48 pieces WEIDMÜLLER WTW WFF 70 106720, 20 pieces Dimensions : 420 x 44 x 44 mm WTW WFF120 106730, 10 pieces Dimensions: 420 x 44 x 44 mm WTW WFF185/300 106740, 18 pieces Dimensions: 420 x 44 x 44 mm New ! Dimensions ( packaging ): 300 x 100 x 120 mm

Wall mounting, with through-wiring kit, 2 pieces EATON CEAG GuideLed 10011/11011 CG-S Article number: 40071353641 Through-wiring kit: Article number 40071353643 including LED supply and CG-S technology LED supply: V-CG-SLS28 Article number: 40071352419 P: max. 3 W Primary: 220 - 240 V AC, 50 / 60 Hz, 176 - 275 V DC Secondary: 28 V DC New, with documents ! Dimensions ( wall mounting ): 220 x 114 x 25 mm Dimensions ( packaging ): 230 x 130 x 60 mm

CEE wall socket, CEE plug, with switch MENNEKES Article no. 5106A 32 A-7h 500 V AC 50 / 60 Hz Contacts: 4p (3P+PE) can be switched off, with mechanical locking New ! Dimensions ( wall socket ): 270 x 120 x 150 mm Dimensions ( packaging ): 300 x 170 x 130 mm

Wall bracket ROBUR F20 / F30 4 arms arm length 315 mm Angle between arms: 85° / 95° Projection 650 mm 360° rotatable (horizontal) wall mounting 220 x 300mm Accessories z.B. for ROBUR hall heater F20N, F30 used, tested ! Dimensions: 900 x 400 x 300 mm

Wall slewing crane, hall slewing crane, hall crane, workplace crane -Manufacturer: Abus, wall slewing crane type LW, load capacity 125 kg -Throat: 2000 mm -Swivel range: 270° -Chain hoist: ABUS type GM 2 125.8-1 -Lifting speed: 2.00/8.00 m/min -Chain length: 3.16 m -Transport dimensions: 2165/740/H300 mm -Weight: 86 kg

Wall slewing crane, hall slewing crane, hall crane, workplace crane -Manufacturer: Abus, wall slewing crane type VW, load capacity 1000 kg -Throat: 5230 mm -Swivel range: 270° -Chain hoist: ABUS -Lifting speed: 1.30/5.00 m/min -Chain length: 3.35 m -Transport dimensions: 5300/1450/H1320 mm -Weight: 750 kg

Welding fume extraction for wall mounting NEDERMANN Extraction system, Extraction fan, Articulated extraction arm Year of manufacture: 1996 Centrifugal fan series: 522 Article number: 510422 Extraction arm series: 535 Article number: 522435 Flow rate approx. 1200 Suction hose 160 mm Suction funnel 250 x 300 mm Air outlet 160 mm Extraction arm length approx. 3 metres Motor power 0.75 kW Mains connection 400 volts, 50 Hz. • Centrifugal fan with rotating arm• Extraction arm with 4 joints • Intake funnel with shutter • Bracket for wall mounting Weight 35 kg Further welding fume extractors under stock number: 61326, 61328; used

Welding fume extraction for wall mounting NEDERMANN Extraction system, Extraction fan, Articulated extraction arm Year of manufacture: 1997 Centrifugal fan series: 521 Art. No: 510521 Extraction arm series: 535 Art. Ref: 522535 Flow rate approx. 1000 m3/h Suction hose 160 mm Suction funnel 250 x 300 mm Air outlet 160 mm Extraction arm length approx. 3 metres Motor power 0.37 kW Mains connection 400 volts, 50 Hz. • Centrifugal fan with rotating arm • Extraction arm with 3 joints •Suction funnel with shutter • Bracket for wall mounting Weight 35 kg Other welding fume extractors under stock number: 60890, 61327, 61328; used

Bizerba s/s wall mounted weighing system, consisting of scale, dimensions: 550 mm x 440 mm, Bizerba indicator with label printer, type: SW 800 G, 230 V, 50 Hz, min/max: 1000 g/150 kg, e= 50g,T=-150 kg, dimensions wall mounted frame: 600 mm x 520 mm x 30 mm.

Wall unit NOBILIA Easytouch APL décor black, niche panelling, 4 display case parts, exhibition wall purchased 03/22 for ? 1.818,- net, dismantled, completeness not checked

Metrics: Length 140 cm x Width 100 cm x Height 220 cm Equipment: Mobile stacking wall on castors with parking brake for precise stacking of bundles of boxes on pallets Other: Stacking wall can be visited at any time by arrangement.

270 sqm Hünnebeck Rasto wall formwork immediately operational BOM on request

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

Producer: IGLOO Type: MILOSZ 2/1.0 Length x width x height: 1000 x 630 x 1145 mm Power supply: 230 V Cooling wall shelf IGLOO type MILOSZ 2/1.0 with aggregate exterior Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Slab formwork, wall formwork, wooden beams, props, formwork accessories used immediately operational. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. Note also our other ads! We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us!

Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt

arm length: 4000 mm weight max. in kg: 500 kg swivelling range: 180 Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. 200 pcs. rear wall grille Used goods, good condition, see pictures Length 200 cm Width 110 cm Height 3 cm Mesh 10 x 5 cm galvanized Negotiable price: € 29,-- per piece net from stock Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing is possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas broom-clean company clearances Closures Fast, flexible, quick-witted! We also clear a ...

Iron grille rear wall grille grid Zwinger fence galvanized - 2450 x 950 mm - used - 10 pieces They can also be used, for example, to build floors, stairs, dog kennels, window bars or fences. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We are happy to offer you suitable stands, trusses, lattice box supports, lattice rear walls and much more. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. Properties: -Galvanized - Used, in good condition - Solid and robust design - Ready for collection by arrangement Dimensions: - Width: 2,450 mm - Depth: 950 mm - Mesh size: 50 x 50 mm - Rod diameter: approx. 3 mm Scope of delivery: - 10 Grating Properties: Condition: g ...

The scope of delivery includes: 01x rear wall grille, used Material color: sendzimir galvanized Total width: approx. 2,700 mm Total height: approx. 1,500 mm Mesh size: approx. 103 x 53 mm Mesh size (elevation): approx. 53 x 53 mm Frame profile illustration: L approx. 30 x 30 mm Wire thickness: approx. 1.75 mm Hole diameter: approx. 7 mm Hole grid spacing: approx. 25 mm Weight/ pcs.: approx. 10,40 kg

built 2009 - last recurring examination 10/21 - complete with test book, declaration of conformity, acceptance test, etc. - Boom 6 m, up to 400 kg - Chain hoist Star Liftket BF 021/51 500/2 - 4/1 - complete with wall brackets, cable drag, etc.

We offer a Doka Framax 270 wall formwork complete with accessories 270.81m² The formwork is in original Doka rental warehouse quality, partly newly covered with original Doka Xlife formwork. Controlled and sorted. Suitable for higher-value applications. Accessories original Doka rental warehouse quality. Exposed concrete class 2/3 possible without any problems. New value approx. 203397,00€ Special net price 75421,00€ 12 588109500 Framax Xlife element 2.70x2.70m 10 588103500 Framax Xlife element 2.40x2.70m 10 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 4 588122500 Framax Xlife-Uni-Element 0.90x2.70m 8 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 8 588106500 Framax Xlife element 0.45x2.70m 8 588108500 Framax Xlife element 0.30x2.70m 8 588130500 Framax Xlife inner corner 2.70m 8 ...

- Crankc. end Cover End Wall Cover MWM 12302284 - Suitable for several motors - Please note! Price per piece! - 12302284 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting  ...

We offer a Doka Framax wall formwork 201m² in original Doka rental warehouse quality. Special net price 46700,00€ + VAT New value approx. 146166€ Complete with accessories, also original Doka rental warehouse quality. Formwork completely cleaned, inspected and sorted. Formwork lining original Doka Xlife exposed concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Partially reassigned. 10 588103500 Framax Xlife element 2.40x2.70m 16 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 8 588122500 Framax Xlife-Uni-Element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 6 588106500 Framax Xlife element 0.45x2.70m 6 588108500 Framax Xlife element 0.30x2.70m 4 588130500 Framax Xlife inner corner 2.70m 4 588126000 Framax outer corner ...

We offer: Rear wall grille, used Dimensions: approx. 990 x 930 mm 6 piece(s) in stock 21698 Harsefeld Per piece € 10,00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

We offer: Rear wall grille, used Dimensions: approx. 2,200 x 1,000 mm 20 piece(s) in stock 21698 Harsefeld Per piece € 45.00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

We offer: Rear wall grille, used Dimensions: approx. 2,200 x 1,500 mm 26 piece(s) in stock 21698 Harsefeld Per piece € 50,00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

We offer: Rear wall grille, used Dimensions: approx. 1,050 x 950 mm 30 piece(s) in stock 21698 Harsefeld Per piece € 10,00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

We offer: 1 used rear wall grille Dimensions: approx. 2,750 x 1,000 mm There are 35 piece(s) in stock 21698 Harsefeld Per piece € 147,00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,200 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 8,14 kg Internal designation: RW-2

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,000 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 7,17 kg Internal designation: RW-3

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 1,100 mm total height: approx. 1,000 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 3,90 kg Internal designation: RW-1

We offer a Doka Frami wall and foundation formwork 206,505m² complete with many accessories. The formwork is 90% newly covered with new Finply birch cladding 220- 240g/m²phenolic resin coating. The rest of the elements are checked and sorted and covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. New value approx. 160.592,60€, special net price 41.498,15€ Piece Description 19 Frami Xlife-Element 0.30x1.50m new plywood 2 Frami Xlife-Element 0.45x1.50m new plywood 51 Frami Xlife-Element 0,60x1,50m new plywood 35 Frami Xlife-Element 0.75x1.50m new plywood 2 Frami Xlife-Element 0.75x1.50m used top xlife 7 Frami Xlife-Element 0,90x1,50m used top xlife 6 Frami Xlife-Element 0.90x1.50m new plywood 11 Frami inner corner 1,50m 20cm inner corner 7 Frami outer corner 1.50m outer corner 1 Frami hinge corner A galvanized  ...

CEE wall socket, CEE plug WALTHER Type 161 63 A-6h 400 V AC 50 / 60 Hz number of poles: 5p (3P+N+PE) unused ! Dimensions: 260 x 125 x 180 mm