wafios ds 50 used for sale

This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. Worlds first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine.

This 3-axis measuring machine was manufactured in 2009. The SHIN NIPPON KOKI MM 2500-5012 offers expansive dimensions and capabilities, with an effective distance between columns of 3500mm and axis movements of 5000mm on the x-axis, 2500mm on the y-axis, and 1200mm on the z-axis. It features a maximum feed rate of 10,000 mm/min, supported by AC servo motors, ensuring precise and rapid positioning. The expansive measuring range makes the SHIN NIPPON KOKI MM 2500-5012 machine we have for sale ideal for large-scale precision measurements. For more information on this highly capable machine, please contact us today.

This AMT AHDR 500/1600 was manufactured in 2018. It features a coil diameter of 1600 mm and a spreading range of 250–650 mm, powered by dual 0.75 kW reel drives. With a total weight of 1200 kg and a through height of 1200 mm, its in excellent, like-new condition with zero operating hours. Contact us for more information about this machine.

This MIKRON Multistar CX-24/500R was manufactured in 2009. It features a high production capacity with up to 280 pcs/min in multiple cycles and a main motor power of 2.2 kW. The machine accommodates a maximum workpiece diameter of 24 mm with swivel clamp and operates efficiently with a spindle rotation speed up to 32,000 rpm. Ideal for high-volume production environments. Contact us for more information about this machine.

sheet width: 3050 mm plate thickness: 6 mm rear stop: 10-1000 mm cutting angle: 0,5 - 2,5 ° down holder: 20 Stk no. of strokes: 14 - 23 Hub/min work height max.: 900 mm oil volume: 140 l total power requirement: 11 kW dimensions of the machine ca.: 4000 x 2150 x 1900 mm weight: 7800 kg Equipment: - ELGO control unit type P50 - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - Angle stop 0 - 180 - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine.

Datenblatt / Datasheet: Control: OSP P200-M Travels X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degree] 1; 360 degree incrementing Tool Changer 200 ATC MAS BT50 Tool slots: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet pool 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Further features: – Renishaw Sample – Renishaw Tool Break Control – Mayfran Concept with high-pressure pump In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both ele ...

This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.

This Takisawa EX-508 was manufactured in 2006. A horizontal turning machine featuring a turning diameter of 300 mm, length of 380 mm, and a robust 12-position turret. It includes a Fanuc 18 i TB control, ensuring precision and ease of operation. Ideal for detailed turning tasks, it also boasts a spindle motor power of 11/18.5 kW for demanding operations. For more information about this machine, please reach out to us.

Kohler Power Wave 5000TP UPS System 2014, capacity of UPS - 25 kVa, inclusions 46 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company)

This 3-axis HAAS VF-5/50XT was manufactured in 2012, designed for robust vertical machining. It operates on a voltage of 360/480, with a 3-phase power supply and a frequency range of 50/60 Hz. The machine handles a full load of 45 amps and a largest load of 70 amps. If you are looking to get high-quality milling capabilities, consider the HAAS VF-5/50XT machine we have for sale. Contact us for more information.

A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible.

This 4-axis MORI SEIKI NH-5000 40 was manufactured in 2003, featuring a robust horizontal machining centre with a spindle speed up to 20,000 rpm and a power range of 22-30 kW. It includes a versatile tool magazine with a capacity up to 180 tools and a dual-pallet automatic changer to enhance productivity. Pallet size is 500 × 500 mm, supporting a maximum workpiece height of 1,000 mm. Consider the opportunity to buy this MORI SEIKI NH-5000 40 horizontal machining centre. Contact us for more information.

This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information.

This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information.

Tünkers Liliput 500 banding machine; Condition obsolete; Working width 500mm; Speed adjustable; suitable for cold glue. Gluing machine Tünkers Liliput 500; condition rebuilt; working width 500mm; adjustable in speed; used for cold glue.

Strip width 1,500 mm, strip thickness 0.5-1.5 mm, coil weight 10 tons. Longitudinal sections 4, straightening rollers 7, coil inside diameter. 508 mm Coil Outside Diam. 1,600 mm

Cincinatti Machining Center, 2 Available: Arrow/Milacron 500, built in 1995 & 2000 Technical data: Travel (X / Y / Z) 510 mm / 510 mm / 510 mm Work table (L × W) 700 × 520 mm Maximum table load / workpiece weight approx. 350 kg evenly distributed Tool changer (tool magazine) 21 tool positions Spindle holder / tool holder SK 40 Spindle speed (min–max) 60 – 6000 rpm (sometimes specified for newer variants up to 8000 rpm) Machine weight approx. 3050 kg (≈ 3 t) Dimensions approx. 2000 × 2650 × 2700 mm (L × W × H) Number of axles 3-axis CNC

sheet width: 2040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 3,00 t dimensions of the machine ca.: m Controlled backgauge up to 1000 mm Side fence and table extensions Cut length limiter Cut edge lighting Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt width 1,500 mm, strip thickness 0.5, - 2.0 mm, coil weight 7 tons, straightening rollers 7 pcs. , Longitudinal sliced 4 x , Coil inside diam. 508 mm, coil outer diam.1,600 mm

A Schüco double miter saw for aluminum profiles is available. Saw units: 2, max. cutting length: 6000mm, saw blade diameter: 500mm, bore: 32mm, max. miter angle: 22.5°, fixed stops: 90°/45°/22.5°, min. cutting length: 300mm. Machine dimensions X/Y/Z: approx. 7500mm/1800mm/2000mm, weight: approx. 2200kg. Documentation available. An on site inspection is possible.

Key data: 500 mm

Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device Instruction manual Weight: 1400 kg

Ref. no.: 17540 Hersteller: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Belt width 1,500 mm. Strip thickness 0.5 -3.0 mm, coil weight 7 to. Longitudinal cuts 4 pcs., straightening rollers 7 pcs., coil inside dia. 508 mm, coil outside diam. 1,600 mm Facility consists of: Decoiler Pallet truck Pressing arm Overflow table Straightener Longitudinal shears Cross shears Scrap Wrapper Side table

Inv. Num. : 8953 Type: MULTICUT 500i S Producer: MAS Created: 2011 Parameters: Control system: Siemens SINUMERIK 840 D Maximum turning diameter: 690 mm Max. turning length: 1527 mm Maximum milled profile: 486 x 486 mm Maximum spindle speed: 3500 1/min Maximum workpiece weight: 1600 kg Axis X: 640 mm Axis Y: 370 mm Axis Z: 1600 mm Length: 5400 mm Width: 3950 mm Height: 3760 mm Weight: 22000 kg

General SKU397X1160 MakeBoge LocationBarneveld CEcheck TypeC 15-2-LFR-500 Pressure Pressure buildup10 Bar Main Features Capacity2.25 m3/Min Motor30 KW Pressure10 Bar Specified Features - Blower Blowercheck 2x air compressor Capacity0,52-2,25 m³/min Motor2x 15 kW, 380 V, 3004 rpm Information No.5146436 / 5147193 Year of construction2020 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace2x 2,20 x 0,95 m Total height2,00 m Weight1600 kg Extra Specifications With control unit (as is), 2x Funke heat exchangers, Boge water/oil separator, type CC 10-2, 2x filter unitsBlowersBogeBlowers > BlowersBrand > Boge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU400X1189 LocationBarneveld CEcheck MakeGross Type500 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume640 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck (Bioreactor) Capacity500 Ltr. (640 Ltr.) Vessel sizesø 1000 x 1140 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (7,7 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.7855 Year of construction2005 Mounted on legscheck and wheels Floorspace1,40 x 1 ...

Transnorm belt conveyor GF 3450-600-500 RA2469 Technical data: Conveyor length (NL): 3450 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3450 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of ...

Total Weight: 2,800 kg Output Current: 288 A Output Voltage: 400 V Output Frequency: 50 Hz Rated Power: 160 kW (217.54 hp) Rated (full) power: 160 kVA Constant Power: 160 kW (217.54 hp) Maximum speed: 1,500 rpm

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Key data: 8000 KW

Diesel Generators Wartsila 2 x 12V32 HFO – 2 x 4.0 MW/ 50Hz Deliver proven, industrial-grade power with these Wartsila 12V32 medium-speed diesel generator sets, currently available in standby condition. Equipment is maintained by the book and thus in good operational condition. Last thorough 48k Service was carried out in 2016 by Wartsila Service for both engines and since then, the plant has been operated about 20’000 hours. Designed for continuous and prime power duty, these units offer a good reliability, fuel flexibility, and choiceed auxiliaries — making them ideal for industrial plants, captive power projects, utilities, as a base load or back-up electric power generation. These units are priced for sale. Contact us today to receive commercial valuation, scope clarification, and inspection arrangements for this 8 MW Wartsila power solution Technical Characteristics  ...

Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 Item #: Usm-239 Category UHT Plants BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 TECHNICAL DATA: Tetra Pak Automated uht for high acid beverages. The heat treatment in the steriliser is base on plate heat exchanger. TEMPERATURE PROGRAM: FOR TEA: 5Brix Heating: 25°C to 140°C (4 seconds) Cooling: 140°C down to 25–80°C FOR JUICE: 12Brix Heating: 25°C to 120°C (30 seconds) Cooling: 120°C down to 25–80°C CONDITION: B

Height 2260 mm Width 1430 mm Length 2130 mm Weight 1400 kg Capacity 530 l Electrical Supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless Steel, Acid Resistant Agitator Type Paddle Agitators Load 350 kg Product ejection Manually opened flaps, front Loading Pole loading, freestanding Stirrer type Open stirrer Number of shafts Single shaft Comes with a loading column for 200 L battlements.

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm Information No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX compatiblecheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steel With sound proof cabinet Working hours 65 hrs Ball millsSiebtechnikMills > Ball millsBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU413X1251 MakeCelsius LocationBarneveld CEcheck TypeCWR500 Pressure Working pressure2.6 Bar Working pressure jacket2.6 Bar Technical specs Max. temperature140 °C Main Features MaterialStainless steel Motor9.2 KW Specified Features - Continuous dryer Screw dryercheck (screw heat exchanger) Double shaftcheck Continuouscheck Capacity1500 kg/h Product inletDN150 Manhole440 x 330 mm Product outlet250x700 mm With jacketcheck 25 l. Shaft can be heatedcheck Max. temperature140 °C Motor9,2 kW, 400/690 volt, Screw speed6.4 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information No.610269.C Year of construction2011 Mounted on framecheck With switchcheck Floorspace9,027x1,10 m Total height1,90 m Weight6210 kg Extra Specificationsinternal volume 2x 550 l., , steam heated Continuous dryersNew arrivalsCelsiusDryers > Continuous dryersNew  ...

General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...

General SKU322X551 LocationBarneveld CEcheck MakeGero Main Features Materialstone Max.temp.1100 °C Specified Features - Drying oven Drying ovencheck Max. temperature1100 °C Number of compartments:1 Internal width500 mm Internal depth250 mm Electric capacity6 kVA, 400 V Number of doors:1 With fancheck Motor0,25 kW, 230/400 volt, 2850 rpm MaterialGlass, stone Information TypeDRSR-A-200-500/11 No.200801042Drying ovensNew arrivalsGeroDryers > Drying ovensNew arrivalsBrand > Gero What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU438X1385 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor18.5 KW Length1100 mm Specified Features - Stirrer Stirrercheck Shaft length1100 mm Sizes stirring headø 250 mm Motor18,5 kW, 400 V, 2935 rpm Mounted on supportcheck MaterialStainless steel Information MakeYstral Serial266680913 TypeY 18.500 S/GD7-4 TDS Year of construction2013 Floorspace1.00 x 0,41 m Total height2,10 mStirrersYstralMixers > StirrersBrand > Ystral What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U907 MakeSiemens TypeDiffraktometer D5000 Year of construction1991 LocationBarneveld Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice. MiscellaneousSiemens - ElmoMiscellaneous > MiscellaneousBrand > Siemens - Elmo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

General SKU312X501 MakeJ. Engelsmann TypeVib speed 500 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Surface0.5 m2 Size length1000 mm Sizes width500 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:1 Sieve sizes1000x500 mm With covercheck InletDia. 195/100 mm Outlet2x 165 mm Drive vibro motorcheck 2x Motor0,30 kW, 230/400 volt, 1500 rpm Sieve perforation0,315 mm With ball cleaningcheck MaterialStainless steel 1.4305 (303) Information Mounted on stainl. st. framecheck With switchcheck Floor space1,80x1,20 m Total height2,00 m Weight350 kgVibro sievesEngelsmannSieves > Vibro sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU397X1148 LocationBarneveld CEcheck MakeDe Dietrich TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume499 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 1000 x 1060 mm Dished bottomcheck Dished top sidecheck Manhole300x400 mm Top connectionscheck Outletcheck With jacketcheck (135 Ltr.) Max. temperature— 10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.54020 / 71431 Year of construction1982 / 2011 Mounted on legscheck Floorspace1,3 x 1,3 m Total height2,74 m Weight2000 kgGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is ...

General SKU397X1149 MakeDe Dietrich LocationBarneveld TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume500 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 800 x 1060 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN80 With jacketcheck (135 Ltr.) Max. temperature—10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.58632 Year of construction1991 Mounted on legscheck Floorspace1,1 x Total height1,06 m Weight1600 kg Technical specs Extra information135 Ltr. 6 bar —10 / 200 °CGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth ...

General SKU376X935 MakeBecomix TypeDH-500 LocationBarneveld CEcheck Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drivecheck (freq controller) Speed2910 rpm. Inline high shear mixers MaterialStainless steel 1.4306 (304L) Information No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specificationsin-line colloid-millInline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working conditio ...

General SKU202X016 MakeABL Anlagentechnik/ OFRU LocationBarneveld TypeASc-500 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Distillation Distillation installationcheck Capacitybruto 500l, netto 250l Max. temperature170°C With stirrercheck Motorcheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Distillation Capacity510/55l Information No.020113 Year of construction2013 Year of construction2013 Mounted on framecheck With switchgearcheck ( as is) ATEX compatiblecheck Extra SpecificationsWas used to regenerate(recover) the solvent after filtration step before loading into a tray dryer... in this case acetone were captured in the IBCs ,to reduce the footprint of lost solvents...the recovery system will work with similar solvents as wellDistillationOFRUColumns > DistillationBrand > OFRU ...