wafios ds 50 used for sale

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Technical data of the pallet rack stand: Shelving system: Alser Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: brown Profile dimensions: C 80 x 40 x 15 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) Height: 2,500 mm Depth: 1,050 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Alser Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material color: blue Profile dimensions: C 80 x 40 x 15 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) Height: 2,500 mm Depth: 1,050 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

FAS conveyor roller curve 90° 635-500 IR850 RA1990 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 635 mm roller width (NUB): 500 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor Engine power: kW 0.15 S1 Hz 50 Funding speed: 0.93 m/sec Drive: Center drive usable width: 500mm The rolls are higher than the frame Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 850 Nominal / outside width in mm: 635 Roll width in mm: 500 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,15 Conveyor speed m / s: 0,93 scope of delivery: without supports and side guides Für eine  ...

Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 15000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Transnorm conveyor belt GF 12330-600-500 RA2072 Technical data: Conveyor length (NL): 12330 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor R27 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 12330 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0 ...

Transnorm Rising falling Incline belt conveyor with arch GF 580+1990-600-500 RA2430 Technical data: Conveyor length (NL): 2570 mm ( 580 mm arch + 1990 mm riser segment ) frame width (NB): 600 mm, 750 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 1.6 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2570 ( 580 + 1990 ) Nominal / outside width in mm: 6 ...

Transnorm Rising falling Incline with arch belt conveyor GF 4500+700-600-500 RA2195 Technical data: Conveyor length (NL): 5300 mm ( 4600 mm incline + 700 mm arch ) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 5300 ( 4600 + 700 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...

Transnorm Roller Curve Conveyor 45° links 565-500 IR 750 RA1283 The Transnorm roller curve is from 2004 and in a good (used) condition. It has a sEW mid-engine with brake. Supports are included in the scope of delivery. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 45° left Built: 2004 Condition: good (used) Engine: fully functional Angle: 45° Inner radius (IR): 750 mm Nominal/outer width (NB):565 mm Belt width (GB): 500 mm Engine Type: SEW Gear motor with brake Engine Power: kW 0.37/0.37/S1 Hz 50 A 2.15/1.24 Drive: Center drive Funding speed: 30 m/min Weight: 84 kg Scope of delivery: incl. 2 supports (height adjustable) Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Für eine individuelle, fachmännische Be ...

Inv. Num. : 5955 Type: Trumatic 500 R Producer: Trumpf Created: 2003 Parameters: Control system: TRUMAGRAPH CC 220 S Switch-on hours: 29433 h Compressive force: 22 t Machine height: 2200 mm Machine length: 6900 mm Machine width: 5800 mm Machine weight: 11000 kg 2020: Replacement of hydraulic hoses

SSI Schaefer PR600 – 30.90 m | Height 7.50 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racking for Euro pallets. The proven PR600 design offers high payloads, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type P100 / P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement.  ...

Width 50 cm Year of manufacture 1997 Flexible sword folding unit Self-control Mobile substructure Delivery date: short-term Price on request. We supply and install worldwide.

Key data: 500 mm, 45 °

The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.

Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

Height=2 m, Overall length= 1.05 m, Overall width= 4.76 m, Net weight= 750 kg,

Height=0.45 m, Overall length= 0.5 m, Overall width= 0.7 m,

Height=1.35 m, Overall length= 1.05 m, Overall width= 1.6 m, Net weight= 630 kg,

Key data: 3050 mm, 6 mm

3000 x 6mm Elgo P50 Rear sheet supports

Key data: 800 mm

Technical details are on picture. Parts shown by hand not come.

plate width: 2503 mm plate thickness: 4.0 mm ST plate thickness: 2.5 mm VA plate thickness: 6.0 mm ALU number of strokes - loaded: 15 - 20 Hübe/min cutting angle: 1.7 ° work height max.: 900 mm Control: ELGO TYP 85 total power requirement: 8.5 kW weight of the machine ca.: 3400 kg range L-W-H: 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 500 mm Equipments: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the cente ...

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Müro 5000/A4 TM block size press; cleaned and tested; insertion width 350mm; Insertion height 520mm; Stack increase for small stacks. Padding press Müro 5000/A4 TM; cleanded and checked; width 350mm; hight 520mm; pile elevation.

PUC Process Plant VLT 500 A The Probst & Class VLT 500 A is a process plant that is primarily used for homogenization, mixing and comminution in process engineering. Typical applications are the production and processing of products where a very fine and uniform distribution of all components is required, such as in the food, chemical, cosmetics and especially in the lubricating grease industry. Function and properties The VLT 500 A works according to the rotor-stator principle and is capable of being used in both batch and inline operation. Other features include high throughput, flexible adaptation options depending on the processing step and product, and the possibility of setting up complete process lines with different modules (e.g. venting, filtration, pumps). Advantages and special features Very fine homogenization and comminution, even with demanding mixtures. Flexible ...

The VOGEL YS501X ECONOMIC carton sealing machine is our recommendation especially for rather large carton formats that are glued in series Carton formats: Length 150 – ∞ mm Width 150 – 500 mm Height: 140 – 560 mm Specifications: Operating voltage 220 V CE marking Accessories: In addition to our VOGEL carton seamer range, we offer rollers, feed and trailing tables, as well as roller conveyors. Our YS501X ECONOMIC carton sealer is a cost-effective solution when it comes to securely sealing cartons in rather large formats. Two side conveyor belts ensure that your cartons are safely transported through the carton sealer. The carton width is adjusted mechanically via a crank. The height adjustment is particularly easy and quick to solve on this machine, because the upper gluing unit only has to be unlocked and can then be easily brought to the respective height. Due  ...

Leopard 1 engine MTU Mercedes Model: MB 838 Ca-500 Power: 830 hp 10-cylinder multi-fuel engine with approx. 38 litres displacement Speed: 2200 Weight dry: 1930 kg Bore stroke mm: 165/175 Displacement/cylinder: 3.74 l Cylinder displacement: 10 V / 37.4 l

Transnorm belt conveyor 800-600-500 RA2041 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 545 mm Motor type: SEW motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,02 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: Supports Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Co ...

Type of Machine : Coolant System Model: HA 500 / 100 – AF Year of Manufacture: 2015 Flow rate: 500 l/min Medium: Cutting oil Work material: Aluminum Main voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power: 44.1 kW Current consumption: 81.4 A Empty weight: 1,350 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=1.275 m, Overall length= 0.99 m, Overall width= 0.75 m, Net weight= 1000 kg,

Generator – ABB AMK 500L4A BATH Manufacturer: ABB Rated Power: 2,020 kW Voltage: 690 V Current: 1,522 A Frequency: 50 Hz Power Factor: 1.0 Speed: 1,680 rpm (max 2,450 rpm / 2 min) Protection Class: IP54 Insulation Class: F Weight: 5,010 kg Year: 2005

Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Key data: 1500 , 220 , 40

Presse à injecter ENGEL 150 T type ES 500/150HL Année de fabrication : 2001 En bon état de fonctionnement Force de fermeture : 1500 KN / 150 T Diamètre vis : 40 mm Volume injectable : 251 cm3 Pression d’injection : 1300 bars Rapport L/D. : 20 Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 700 mm Course de l’ejection. : 150 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 820 x 750 mm Dimensions : 5,45 x 1,60 x 2,40 m Poids : 13 000 kg

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible.

The machine is in good technical condition, testing is possible by prior arrangement.

Manufacturer: Bottero Model: TRANSFER 500P Year of Manufacture: 2018 Voltage: 400 V Frequency: 50 Hz Rated Current (In): 3 A Mass: 1000 kg Minimum size : 140mm Max. size : 2000mm Thicknesses from 3mm – 19mm Titan 222L They have also ground 2mm glass several times. Find more here - .ucymachines/ Contact us at - sales@ucymachines

machine measurements: B/H/T 925 x 1.750 x 1.500 mm machine weight: 550 kg power capacity: -- kW Condition: used, very good condition Specification: Pad Printing Machine TPX 501 TFC E sealed Pot System - used only approx. 3 years in use consisting of: - Pad printing machine with closed ink system cliché size 450 x 220 x 0,7 mm equipped for 4-colour printing Print head with ceramic ring 96 mm incl. machine base (for a description see appendix) - printing capacity max.: 900 - 1.600 prints/hour - Drive TPX: pneumatic - Control: Microprocessor with EPROM - Tampon stroke: electronically infinitely variable programmable - Tampon vertical stroke: max. 160 mm - pad outreach: max. 149 mm - Weight with base: approx. 550 kg - Dimensions W/H/D: 925 x 1,750 x 1,500 mm - Displacement unit VR 1 Transfert Carreé E, conne ...

Properties: Volume 10500 L Material V2A (AISI 304) 1.4301 Vertical design Total height 5000 mm Diameter width 1800 mm Surface marbled on the outside Number of feet 4 Last Use Food Description: Tank topstock: Clapper bottom Crane eyelets Cylinder: Level indicator without scale in plastic Threaded nozzle DN 60 and disc valve DN 60 Manhole 300 x 400 mm Tasting tap Ladder hooks Tank underbody: Clapper bottom forward-drawn residual drain pipe with disc valve DN 60 4 feet

Mori Seiki SL250 b 500 High-performance CNC lathe with bar feed (Kupa 2 m) Collet chuck Passage 65 mm Year of construction 1998 Control Fanuc 16l Block Recording Switch-on hours approx. 88875 Spindle hours 19,000 Miscellaneous accessories:

Transnorm conveyor belt GF 1200-600-500 RA2424 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...

turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC turning diameter over slide: 880 mm turning diameter over bed: 1220 mm tail stock: M80 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm spindle turning speed - stepless: 0 - 1000 U/min spindle motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m complete retrofit in 2020 - CNC Control Fagor 8055 TC - Tool holder turret:SAUTER model 0.5.320.025, vertical axis - Chip Conveyor - 4-jaw chuck Ø1000 mm - 3-jaw chuck Ø500 mm - Steady Ø500 mm - Movable bezel Ø250 mm - Special bar for machining very long interiors - Coolant RETROFITTING IN 2020 • Grinding of carriage guides on the X and Z axes • Preloading of X and Z axis ball screw nuts • New Turcite placed on the X and Z axis carriages • General review and disassembly of the engine and head regula ...

Rittal control cabinet TS 8806.500 Rittal standard enclosure TS 8806.500 Lighting PS 4155100 220x80x60 cm (HxWxD) Powder-coated Air conditioner Rittal SK 3304500 EAN: 4028177251038 You can find more control cabinets in other sizes - new and used - in our shop! International shipping costs on request!

Brown & Sharp 500 x 500 mm

Cramer LS 5000 Leaf Vacuum Manufacturer: Cramer Model: LS 5000 Model year: ZIXMM Type: Leaf Vacuum / Leaf Blower Vacuum Weight: 70 kg Speed: 3600 rpm Use: Pick-up and shredding of leaves and light garden waste Features: robust used device with high air flow, mobile and suitable for commercial use Location: Bremen

Electric clamping machines for RENZ RING WIRE® comb binding. Binding without effort. The fast and user-friendly solution for small, medium and time-critical runs. The machines are available in versions with a working width of 500 mm.

Properties: Volume 1500 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1500 mm Cylinder height 1800 mm Diameter width 800 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description: Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 440 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 forward-drawn residual drain pipe with disc valve DN 32 4 feet