wa notstromtechnik used for sale

📏 Compact & clever †the MANTO 1.20 m and 0.60 m!   Need formwork for lower wall heights or looking to add flexibility to your setup? Then the  Hünnebeck MANTO at 1.20 m and 0.60 m height is just what you need! 🔧 The MANTO 1.20 m and 0.60 m is part of the trusted Hünnebeck wall formwork system †robust, durable, and highly versatile . With hot-dip galvanized steel frames , it’s made to handle tough site conditions and daily use. 💡   💼 Especially practical for details: The 1.20 m and 0.60 m panels are easy to handle , quick to install, and ideal for small surfaces , foundations , or as a smart add-on where flexibility is key. And of course, they can be used horizontally or vertically , and combined as needed. 🔁   And just like always: 📦 Accessories? Absolutely! Our warehous ...

Compact, lightweight, and immediately available †this set of used Alu Master formwork panels is the ideal addition to your existing system . 🚧 With approx. 30   m ² , it offers maximum flexibility for smaller jobs or targeted system expansions †cost-efficient, crane-independent, and ready to use . 👉   Only €2,275  for the complete set! What makes the Alu Master so smart:   Aluminum hollow-chamber profile †lightweight & easy to handle, perfect for crane-free formworking Compatible with Stahl Master formwork †seamlessly integrates into your existing setup Powder-coated & easy to clean †for clean results with minimal effort   Perfect for small teams & quick projects †efficient, flexible, well-designed ✨ Secure it now †used ...

Stahlblech lackiert Innenliegende Rohre: 200 mm lang Ø 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock

Airless and Aircoat mit neuen Packungen - Producer Wagner - Typ. Leopard 35-150 icebreaker - Übersetzung 35:1 - Baujahr 2017 - Wetted parts in stainless steel - Max. Eingangsdruck 8 bar - Flow rate, cm³/double hub 150 - Max. Materialdruck 250 bar - Pneumatische Hochdruckpumpe - Mit Hochdruckfilter - Ansaugschlauch, flexibel - Mit Wandhalterung - Machine number 2017-1179 - Standort: am Lager

A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.

BBA BA200 Wastewater Pump for Sale, , The BBA BA200 is a reliable, dry-priming wastewater pump suitable for sewer bypass and emergency management. Equipped with a 75 kW Volvo engine at 1800 rpm, this pump offers high capacity and efficiency for professional use., , Technical Specifications:, Capacity: Maximum 700 m³/h at 1800 rpm (580 m³/h at 1480 rpm), with a 105 mm solids passage for contaminated water., , Head: Up to 28 m at 1800 rpm and 18 m at 1480 rpm; Fast suction at high altitudes., , Fuel tank: 300 liters for approximately 15 hours of continuous operation (20 l/h at full load)., , Dimensions and Features, The pump measures 3320 x 1200 x 1880 mm, weighs 3300 kg, and has 8 flange connections (DIN PN10). Made of cast iron with a mechanical seal, it is sound-dampened and easy to operate, maintain, and install. The level control with two floats is equipped for automatic start-stop. ...

- Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

BBA BA200 Wastewater Pump for Sale, , The BBA BA200 is a reliable, dry-priming wastewater pump suitable for sewer bypass and emergency management. Equipped with a 75 kW Volvo engine at 1800 rpm, this pump offers high capacity and efficiency for professional use., , Technical Specifications:, Capacity: Maximum 700 m³/h at 1800 rpm (580 m³/h at 1480 rpm), with a 105 mm solids passage for contaminated water., , Head: Up to 28 m at 1800 rpm and 18 m at 1480 rpm; Fast suction at high altitudes., , Fuel tank: 300 liters for approximately 15 hours of continuous operation (20 l/h at full load)., , Dimensions and Features, The pump measures 3320 x 1200 x 1880 mm, weighs 3300 kg, and has 8 flange connections (DIN PN10). Made of cast iron with a mechanical seal, it is sound-dampened and easy to operate, maintain, and install. The level control with two floats is equipped for automatic start-stop. ...

A recirculating rack oven WP is available. Tray dimensions X/Y: 600mm/800mm, max. rack trolley diagonal: 1070mm, max. rack trolley height: 1800mm, baking area: 10m², max. tray load: 350kg. Machine dimensions X/Y/Z: approx. 1550mm/1650mm/2550mm, weight: approx. 2000kg, controls: Navigo 3. Documentation available. An on-site inspection is possible.

The Hidrostal Betsy 125GG (popularly also called eekels pump), has been a great success for years! main reason for this:, , spacious dirt passage, pumps viscous liquids with solid particles, high output against a particularly low engine power, suctions very quickly and up to a great suction height (8.5 meters), blockage-free wear-resistant screw centrifugal impeller, can slobber and can run dry, , Machine can be used well for:, , pumping sludge, Keeping sewer wells and cellars dry, everywhere that really needs to be sucked and slobbered, emergency pump unit including fire brigade, water boards and, Water purification, pumping surface water, keeping construction pits and construction trenches dry, , MAX capacity : 342 m3/h at 1500RPM , 400 m3/h at 1800RPM, MAX head : 26 mwc at 1500RPM , 39 mwc at 1800RPM, MAX dirt passage : 100 mm, , Throughput capacity: 340 m3/h, Max dirt passage: 100 ...

Max capacity: 750 m³/h, Max delivery head: 22 MWK, Max free passage: 75 mm, , In stock, available immediately, , Throughput capacity: 750 m3/h, Max dirt passage: 100 mm, Motor brand: ABB MBT200L, Max. head: 22 MWK, Weight: 1200 kg, , = More information =, , Year of manufacture: 2005, Applicable material: Water, Empty weight: 1.200 kg, Connector size: 10 inch, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, jus ...

The Hidrostal Betsy 125GG (popularly also called eekels pump), has been a great success for years! main reason for this:, , spacious dirt passage, pumps viscous liquids with solid particles, high output against a particularly low engine power, suctions very quickly and up to a great suction height (8.5 meters), blockage-free wear-resistant screw centrifugal impeller, can slobber and can run dry, , Machine can be used well for:, , pumping sludge, Keeping sewer wells and cellars dry, everywhere that really needs to be sucked and slobbered, emergency pump unit including fire brigade, water boards and, Water purification, pumping surface water, keeping construction pits and construction trenches dry, , MAX capacity : 342 m3/h at 1500RPM , 400 m3/h at 1800RPM, MAX head : 26 mwc at 1500RPM , 39 mwc at 1800RPM, MAX dirt passage : 100 mm, , Throughput capacity: 340 m3/h, Max dirt passage: 100 ...

Year of manufacture: 2021, Length: 600 cm, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

Technical data according to Muller Martini

Storm Container Washer -Power: 4.31 kW -Pump power: 4 kW -Capacity: up to 240 containers/h -Includes technical documentation -Steam-powered -External dimensions: 3600 x 1050 x 1620 mm -Year of manufacture: 2020 -Weight: 325 kg -Condition: used in very good condition, ready to work

A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible.

The drill drive (drill head) and flushing pipes have a 3-inch (75 mm) passage for easy installation of 50/60 mm filters and gravel filling. , , The rotation of the flushing pipes is driven by a hydraulic motor, with hose couplings connected to a hydraulic system. In addition, the SB 1 flushing drill drive can be operated in such a way that the rotation and opening/closing of the spade valve is controlled hydraulically., For installing drainage/wellpoint filters and pouring gravel (optional)., Weight (kg): 175 (without lance), , Hydraulic motor: CCM160, RPM 170@100L, Flow: 100 (max 125) l/min, Working pressure: 200 (max. 240) BAR, Oil bath: 8 liters, Gear ratio: 3.09:1, Suitable for flushing pipe: 3 inches (75 mm) 4-8 meters long, Lances/flushing pipes included: , ø80 mm, length 387 cm, ø100 mm, length 520 cm, , = More information =, , Year of manufacture: 2024, Empty weight: 160 kg, Te ...

Franz Haas TRO 80 automatic line for the production of standard Wafer Cones Capacity: 5600 pieces/hour Incl. Drum Roller Incl. Transfer conveyor unit with wafer turner Incl. Cooling unit Incl. Automatic cone sleeving unit

A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

Franz Haas VTRO 48 automatic line for the production of standard Wafer Cones Capacity: 3100 pieces/hour Incl. Drum Roller Incl. Transfer conveyor unit with wafer turner Incl. Cooling unit Incl. Automatic cone sleeving unit

Storage areas for machines and systems as well as operating equipment, robots, transformers, packaged general cargo or pallets. 3400 m2 of storage space, 580 shelf spaces. Central location, two locations directly on the A5/A49. Loading/unloading operation. Forklifts up to 16 tons. Indoor cranes up to 32 tons. Planning and execution of dismantling and relocation.

- Number of baking plates: 76 - Output: approx. 4000 pieces / hour - Cone size: max. 195 mm Equipment: - Incl. winding head - incl. Stacking table - incl. cooling band

SOMAT Food Waste Reduction Disposal Composter DH-100W Somat DH-100W Stainless Steel Dehydrator System

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

Complete line for washing/sterilizing/filling/sealing open funnel/spike ampoules, consisting of: Bosch RRU 3064 washing machine - Capacity max. 18,000 ampoules/h - Ultrasonic cleaning in heated water bath - Internal and external cleaning with hot pumped water/compressed air/fresh water/compressed air - Transfer of ampoules to sterilization tunnel - Shared control cabinet with HQS and ALK 5080 - PLC Siemens S5 Bosch HQS 3420 sterilization/depyrogenation tunnel - Capacity max. 18,000 ampoules/h - Drying, sterilization, and depyrogenization of ampoules at a hot air temperature of 150-350°C - Cooling of ampoules to max. 10-15°C above cooling air temperature - New tunnel conveyor belt in August 2021 Bosch ALK 5080 filling/sealing machine - Max. output 18,000 ampoules/hour - Pre- and post-gassing - Filling - Preheating - Sealing via skewer removal, sealing gassing  ...

Equipped with control box and start/stop automatic switch (float switch) , , Thanks to its unique screw centrifugal design, Hidrostal offers an unparalleled combination of high reliability and efficiency. Even with heavily polluted liquids, fibrous media, or large solids, the pump delivers continuous performance – without clogging and without unexpected downtime., , The secret? The single-vane free-flow impeller, which creates a smooth, low-turbulence flow. This reduces wear, prevents blockages, and minimizes maintenance. The result: lower operating costs, longer service life, and maximum availability of your installation., , Hidrostal pumps prove their worth worldwide in wastewater, industrial, energy, food processing, and maritime applications. Where reliability is crucial and failure is not an option, professionals rely on Hidrostal – not through promises, but through years of pro ...

Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...

Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.

A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless  ...

BBA electrically driven 6-inch dirty water pump, suitable for pumping running media., The machine is vacuum-assisted (MP50) and has a soft starter. The machine is explosion-proof and the various components are ATEX-certified., The machine is in stock and ready for immediate use., , Throughput capacity: 370 m3/h, Max dirt passage: 90 mm, Max. head: 15 MWK, Max dirt passage: 1445 rpm, , = More information =, , Year of manufacture: 2007, Empty weight: 1.160 kg, Connector size: 6 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a  ...

This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.

This Intermac primus 322 Waterjet cutting machine was manufactured in the year 2014 in Italy and has 200 working hours. It is equipped with a working table, a pressure system, a PC unit with CAM/CAD drivers, a controller and a silo for technological sand water treating system. It is compatible with DXF, DWG, PDF, CDR, etc. The machine is in very good conditions.

This 3-axis STM WS3040 waterjet cutting machine was manufactured in 2019. It features a large effective cutting area of 3000 x 4000 mm, dual Z-axis CNC for enhanced precision, and is equipped with advanced NUM FLEXIUM plus 3D 5-axis control. Additional highlights include LED work area lighting, a high-pressure Servotron pump, and comprehensive safety technology. If you are looking to get high-quality cutting capabilities, consider the STM WS3040 machine we have for sale. Contact us for more information.

This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine.

VTT Pipe racks ideal for storing all types of pipes and tubes., The frame is fully galvanized., If you have any question dont hesitate to ask them., Dimensions: 4600 x 1160 x 1170, , = More information =, , Year of manufacture: 2026, Colour: Grey, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p ...

This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information.

Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible.

A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible.

AS/RS, TGW with 2xMustang RBG's, 22,756 parking spaces, box size 60x 40x 35cm – used - : Price from location: only 99.500.-€ (net), plus dismantling etc.! Manufacturer: TGW Type: AS/RS, Year of Make: 2011 Device type: Mustang stacker crane Number of stacker cranes: 3 pieces Lanes: 3 Dimensions of the system: length x width x height: 64 x 13 x 7.90m Storage locations: 22,756 pieces Payload: 50kg/crate Load units (dimensions max.): 600 mm x 400 mm x 350 mm Double-deep storage Condition: good Available: immediately Location: Würzburg area Plan is available as DWG – also further technical descriptions Stacker crane Mustang Basic unit: The Mustang single-mast storage and retrieval machine is used for automatic loading and retrieval Retrieval of containers to a high-bay or flow warehouse. This storage system can also be used to feed workstations in assembl ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

passage width: mm working heigth: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BBA electrically driven 6-inch dirty water pump, suitable for pumping running media., The machine is vacuum-assisted (MP50) and has a soft starter. The machine is explosion-proof and the various components are ATEX-certified., The machine is in stock and ready for immediate use., , Throughput capacity: 370 m3/h, Max dirt passage: 90 mm, Max. head: 15 MWK, Max dirt passage: 1445 rpm, , = More information =, , Year of manufacture: 2007, Empty weight: 1.160 kg, Connector size: 6 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a  ...

Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of Make: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 hp 4,000 bar with high-pressure pump 1 Plasma cutting head with Hypertherm XPR300 power source TCI SRA 4.0 High Voltage Control System Abrasive transfer system Abrasive measuring system Anti-collision system Water treatment plant TCI HIDROSYSTEM 2.0 Sludge removal system Lantek Expert 2D software with automatic nesting function

Inv. Num. : 8749 Type: M2-3120B Producer: FLOW Created: 2011 Parameters: Table dimensions: 2000x3100 mm Spindle power: 6.6 kW

Pioneer Pump, Inc. (often referred to as Pioneer Pump”) is a global manufacturer of high-performance pumps and pump solutions used primarily in industrial and heavy-duty applications. The company is known for its robust, efficient designs that are intended to function reliably even in the harshest conditions., , Throughput capacity: 960 m3/h, Max dirt passage: 75 mm, Motor brand: JCB TC-63, Max. head: 50 MWK, Max dirt passage: 1800 rpm, , = More information =, , Year of manufacture: 2012, Applicable material: Water, Empty weight: 3.650 kg, Connector size: DN200, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or ca ...

This Impulse IP-175 Yamuna piston pump is designed for vertical and horizontal drainage. These positive displacement pumps are self-priming and ideal for pumping unlimited quantities of a mixture of water and air. In addition, this pump can run dry without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , , , Multiple units in stock, , Throughput capacity: 95 m3/h, Motor brand: Hatz 1D81z, Max. delivery head: 22 MWK, Weight: 1950 kg, , Throughput capacity: 90 m3/h, Max dirt passage: 0 mm, Motor brand: HATZ 1D81z, Max. head: 22 MWK, Max dirt passage: 1500 rpm, Weight: 1950 kg, , = More information =, , Year of manufacture: 2026, Applicable material: Water, Empty weight: 1.950 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@ ...

This electrically powered GEHO ZD 300 double-acting piston pump, has a major advantage over its larger counterparts in that, it is lightweight and compact. The high efficiency of the ZD 300 ensures enormous capacity., Feel free to call or email us to discuss the possibilities., , Throughput capacity: 30 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, Weight: 480 kg, , = More information =, , Year of manufacture: 2013, Applicable material: Water, Empty weight: 480 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question  ...

BBA PT Piston Pump, The PT piston pump is designed for vertical and, horizontal drainage. These positive displacement pumps are, self-priming and ideal for, pumping a mixture of water and air without, any restrictions. Whats more, these pumps can, run dry without causing damage or wear, to components, , MAX capacity: 35m3/h, MAX delivery head 20mwk, , Throughput capacity: 30 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, , = More information =, , Year of manufacture: 2006, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentradin ...

This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine.

Self-priming, high-pressure pump with stainless steel impeller, Works well, ready for immediate use, Can be used as a spray pump, jet pump or high-pressure pump, , Throughput capacity: 50 m3/h, Max dirt passage: 20 mm, Max. head: 90 MWK, Max dirt passage: 3000 rpm, Weight: 1500 kg, , = More information =, , Year of manufacture: 2000, Applicable material: Water, Empty weight: 1.500 kg, Quick coupler system: Yes, Technical condition: good, Visual appearance: average, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be usefu ...