w p used for sale

table length: 2900 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,9 t dimensions: 2,9 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,5 t dimensions: 1,4 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1150 mm width: 610 mm height over floor: 910 mm table load capacity: max. 450 Kg dimensions: 1170 x 640 x 135 m weight: 47 kg Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. ( IP20 ) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,19 t dimensions: 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with  ...

number: 32 Positionen weight: 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,18 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund Workstation incl. 2 drawers + tool set B Through hardened tool steel, bore Ø 16 mm Holes surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm. Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,32 t dimensions: 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,77 t dimensions: 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mm width: 600 mm height over floor: 860 mm table load capacity: Kg dimensions: 1200 x 600 x 400 m weight: 49 kg Workbench with 5 drawers and solid wood worktop Dimensions 1200 x 600 x 870mm Drawer dimensions (internal) 430 x 400 x 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,26 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500

A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible.

Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible.

A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible.

Automatic side sealing machine for shrinkwrapping packaging. Suitable for very large/wide products. Ideal to be combined with SHRINKtunnel-POF-Xtra Wide. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions: unlimited length, W+H

Automatic side sealing machine for shrinkwrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | max. product dimensions: unlimited length, 300mm width, 150mm height | weight (net/gross): 400/500kg | power: 220V, 2kW | air: 5.5 bar/0.1m?/min | L1680xW960xH1500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Fully automatic L-sealer for shrink wrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Automatic infeed and outfeed of product. - Technical specifications: 220V, 2.5kW | 5.5 bar / 0,1m?/min | max. speed of the machine in neutral: 30 cycles/minute | max. product dimensions (mm): L450xW350xH130 | machine dimensions (mm): L1700xW960xH1400 | weight (net/gross): 290/420kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Economical L-Sealer for wrapping large sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.5kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L750xW600xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1800xW855xH1100 | weight (net/gross): 135/185kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note  ...

L-Sealer for shrink wrap packaging, for very large sized product, semi-automatic (manual infeed of product, automatic outfeed) with pneumatic closing mechanism of L-bar sealer. Suitable to be combined with SHRINKtunnel POF-XXL. - Technical specifications: 220V, 2.0kW | compressed air: 5.5bar, 0.1m? | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L900xW600xH300 (can be varied on demand) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions depending on actual packaging size required | weight (net/gross): 210/250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the  ...

Economical L-Sealer for wrapping middle sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.2kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L450xW400xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1560xW760xH1040 | weight (net/gross): 125/175kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...

Manufacturer: Menzel Type of Machine: Washing Line Year of Manufacture: 2013 Technical Data Fabric Type: Warp knit, lace, Raschel goods, tricot Material Composition: - 100% Polyamide - 100% Polyester - Polyamide/Spandex (Elastane up to 30%) Dimensions & Weight: - Material Width: 2,200 – 3,200 mm - Roller Width: 3,400 mm - Fabric Weight: 50 – 265 g/m² Performance: - Production Speed: up to 40 m/min - Process: Spun oil removing, water-based washing Chemicals Used: - Oil-emulsifier - Washing/wetting agent - Alkali - Acetic acid for pH neutralization Steel Grades: - Lateral Frames: AISI 304 (V2A) - Parts in Contact with Media: AISI 316 (V4A) Machine Specs: - Unwinder Diameter: 1400 mm - Winder Diameter: 1800 mm Power & Utilities: - Voltage: 230/400 V, 50 Hz, 3 Phase - Steam Pressure: 4 – 6 bar - Compressed Air (Oil-Free): 6 – 7 bar - Water Pressure: 2 –  ...

number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item  ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor (or bespoke), Screw length 8.300 mm, The bearings are dust-tight and automatically greased., ...

Vacuum wrapping machine for leather goods including various wrapping tools Tools in format approx. 30.5 x 49 cm approx. 24.0 x 42 cm approx. 30.5 x 45 cm approx. 60.0 x 40 cm

Tools in format approx. 23 x 36 cm + various calendar and notebook tools

Yamato multihead weigher ADW714 SWH Delivered with In-feed funnel that can be adjusted for many types of products. A much more recent RCU810-A coloured control panel. We’ve upgraded to this system compared to the old RCU600. New stainless steel parts, all dimple plated suitable for a lot of products. This prevents product from sticking. A very high-end machine that is in perfect working condition. Ready for immediate production. Because of 14 large heads this machine is capable of processing large products and fast production. Capable of reaching 90 weighings per minute (depending on set-up and product). Weighing range per portion from 20-3000 gram. Able of doing a multi-dump to go even higher than 3000 gram per portion. Have a look at the video below for a quick impression of the machine. For more specific information contact us. We are very experienced with Yamato multihead weighers.

CINCINNATI-MILACRON TWIN SCREW EXTRUDER, for PVC profiles, extruder with 2 x 45 mm conical screws, average production 100 kg/h, 14 kw drive, for profiles with max width 250 mm., calibration desk with 2 pumps x 5 kw, caterpillar pull off unit, contact length 1500 mm, width250 mm., planetary saw, collection table, installed power - used power in work: about 60-65% : 14, capacity: 100 kg/h ca, screws: 45 mm. conical

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

WEIGHING SYSTEM FOR BIG BAG SUPPORTING AND FILLING STATION, The system includes a sturdy painted carbon steel structure to hold 2 big bags, the pneumatic system to fill them from a source, a diverting valve set to fill the bags alternatively and automatically, a weighing platform on which tha bag rests, with loading cells and a digital scale to check and set the weight of each bag ., price options: new machine bespoke to project

Ballenpresse / Waste Baller Welger RV 641

We are offering a fully equipped machine workshop for sale, which includes the following equipment: 1. Machinery - MIKRON VCE 800 Pro Machining Center - LAGUN FCM 152 Milling Machine - CMZ TBI-450 CNC Lathe - PINACHO A 70 Conventional Lathe - PUSKAS PKM 10-S-500 Compressor - PUSKAS PLX-9 Dryer - SUPERLEMA Ø200 Grinder - CDM 210 Horizontal Bandsaw 2. Tools - HSS Drill Bits Ø1 to Ø35 - MD Drill Bits Ø1.5 to Ø20 - HSS Reamers Ø3 to Ø25 - Coated HSS Milling Cutters Ø2.5 to Ø25 - MD Milling Cutters Ø1 to Ø20 - D’ANDREA Boring Heads – Precision 0.002 mm (2 units) - Planer and Squaring Chucks Ø12 to Ø80 - Tool Holders for CNC & Conventional Lathes - Milling and Turning Inserts - Metric & Whitworth Thread Taps and Dies 3. Clamping Systems - ARNOLD MB 125 Vises – Precision-Ground (2 units) - ISO 40 Taper Collet Holders (DIN 69871) - ISO 40 Chuck Holders - Weldon System IS ...

WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm

The Westfalia MSD 60-06-076 milk clarifier is a type of centrifugal clarifier specifically designed for the dairy industry to separate solids, such as bacteria, somatic cells, and other impurities, from milk and cream. This process is essential in ensuring the quality and safety of dairy products., Key Features and Specifications:, - Centrifugal Separation: The clarifier operates using centrifugal force to separate lighter fractions (milk) from heavier fractions (solids)., - Capacity: The MSD 60-06-076 model is designed to process a significant volume of milk per hour, making it suitable for medium to large-scale dairy operations., - Efficiency: Designed to achieve high clarification efficiency, these units help in producing high-quality milk with reduced impurities., - Hygienic Design: Being in the food industry, these clarifiers are constructed with high hygiene standards in mind, usua ...

The Westfalia MSD 60-06-076 milk clarifier is a type of centrifugal clarifier specifically designed for the dairy industry to separate solids, such as bacteria, somatic cells, and other impurities, from milk and cream. This process is essential in ensuring the quality and safety of dairy products., Key Features and Specifications:, - Centrifugal Separation: The clarifier operates using centrifugal force to separate lighter fractions (milk) from heavier fractions (solids)., - Capacity: The MSD 60-06-076 model is designed to process a significant volume of milk per hour, making it suitable for medium to large-scale dairy operations., - Efficiency: Designed to achieve high clarification efficiency, these units help in producing high-quality milk with reduced impurities., - Hygienic Design: Being in the food industry, these clarifiers are constructed with high hygiene standards in mind, usua ...

Welding Fume Extraction, Soldering Suction, Laboratory SuctionHigh Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 DSerien. No. 2902619 year of construction 2004Device air volume flow max. 250 m3/hMinimum air volume flow min. 100 m3/hSeparation efficiency 99.97 %Welding fumes class W3Motor power approx. 0.75 kWNet connection 230 volts, 50 Hz- extraction power infinitely adjustable- 2 pieces extraction connections 45 mm- mechanical air filter (used)- mobile base with 4 fixed castors,

Z455 Workpiece Conveyor Belt of CNC Automatic Lathe WEBO Tape width 80mmx tape length ,450mm fabric tape is missing Drive 380 V on the motor with toggle switch off and on T-slot on both sides Dimensions L1550 x W300 x H150mm Weight approx. 20kg Price EXW excl. VAT Prior sale and errors excepted Euro 200.--

1 cooling water supply system for refrigeration production systems such as cooling tower or evaporative condenser systems with s standing round tanks with a capacity of 10,000 l each, stand on 4 feet per tank Insulated piping, equipped with manual valve flaps with 2 x 4 centrifugal pumps stations standing on 1 frame each, controlled by frequency converter Manufacturer Bauer, Mildenberg, project no. 3708-1 and - 2 Tanks were subsequently insulated with 1 control cabinet system

Rotary Brush Screen WESTFALIA BSB 200 Properties Type BOD 200 Machines No. 1 684 639 Total height 2500 mm Total length 600 mm Depth 600 mm Manufacturer: Westfalia Separator AG

1,000 litre water tank/ storage tank made of V2A Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 2000 mm Cylinder height 1100 mm Diameter 1000 mm Weight 170 kg Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground

Type: WTC600 Belt width: 600 mm Power: 3 x 400V, 50Hz, 0.7kW Dimensions: 1950 x 1200 x 1750 mm Weight: 185 kg CFS batter filter Type: BTF Serial number: 94 Year of construction: 2002 Power: 3 x 400V, 50Hz, 0.12kW Weight: 50 kg

Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm

MAVIJET MJT-W53D 4020 CNC waterjet cutting machine was built in 2020 in Turkey by MAVİFORM METAL MAKİNA SAN.TİC.LTD.ŞTİ. The machine, equipped with a 5-axis cutting head, offers unlimited machining of a wide range of materials, i.e. metal, plastics and glass. Machining is performed with innovative water jet cutting technology, which guarantees perfectly smooth edges without the need for further finishing operations. During cutting, only natural abrasive and water are used, making the process free of harmful fumes and safe for the environment. The offer also includes a comprehensive range of equipment, consisting of, among others, an advanced control system, a 40 kW high-pressure pump and an abrasive tank. MJT-W53D 4020 WaterJet with empty tank weighs 4560 kg. Technical specifications of the MAVIJET MJT-W53D 4020 water cutting machine - CNC controller: ESA - number of axes: 5 ...

Hacker Weima WL 4 Single Shaft Shredder NEW MACHINE The WL 4 single-shaft shredder is a proven classic for shredding waste and residues of all kinds. For example, it is used thousands of times in woodworking companies worldwide. The high number of these shredders, which are in high demand, ensures proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely high durability (even outdoors). Weima Single Shaft Shredder NEW Hopper opening with logspacer 600x1050mm Hopper capacity 0.6m/3 Working width of rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Number of knives 28 pieces Type and size of the knives concave / 40 x 40 mm Screen perforation 10 - 100 mm Paintwork WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5 % / 50 Hz Weight approx. 1, ...

Loos International Weishaupt Brenner 1700 L Volume 1500-1630 KW 6 Bar 110 Degree Temp. Year of construction 2003