w h used for sale

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Universal temperature control unit WEINREICH type WTD 4Temperature control unit with electric heating and connections for external coolingFabr. No.: 11932217 year of construction 1993Temperature max. 140CBorcing pressure max. 6 barPump capacity 30 l/min. Tank volume 4 litresHeating capacity 4 kWeergisation capacity heat exchanger 15 kWCotor capacity of the pump 0.37 kWUmrune water supply + return G 3/8Cooling water flow + return G 3/8Total capacity 4.4 kWNe-connection 380 volts, 50 Hz, CEE plug-in temperature control medium water

Hydr. Scissor lift table WEIDMANN type E5/13-1Fabr. No. 30403339 Year of construction 1982 / 2007Load capacity 500 kgPlatform size 2000 x 1200 mmStroke max. 1280 mmOverall height - table bottom 290 mmOverall height - table top max. 1570 mmTable height with safety support 1430 mmLifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 barEngine power 1.5 kWNex connection 400 volts, 50 Hz.- Rotary switch switch on the hydraulic power unit for up and down lowering speed

Multihead weigher 14 head incl. flow-wrapper and feeder Condition: very good (used) Year of manufacture: 2023 Functionality: fully functional Description: Multihead weigher with 14 heads incl. flow-wrapping machine, feeding into the multihead weigher and removal belt for the finished goods. Built in 2023 and very little run. The system was bought 2 times at the time because the demand for products had increased at short notice. After a short time, however, it sank again, so that the machine is still almost completely NEW. All in stainless steel (304 SS) Weight range: 10 - 2000 g Speed: 120 bags/minute Accuracy: +-0.1g 220V 50/60Hz 1000 W 14 Heads, 1.6 L Volume, 7 Inch HMI, MCU Control Flow wrapping machine with SIEMENS PLC control, maximum film width 420 mm, bag size: B 60-200 mm, L60-300mm, SIEMENS servo motor, 3 line date printer, bagformer 120 mm ...

The scope of delivery includes: 01x Lightweight water hose Material: Polyvinyl chloride (PVC) Material color: black Diameter: 12.7 mm (1/2 inch) Length: 20 m Suitable for up to 200 psi (13.8 bar) Robust, 3-layer construction Weight: 2.60 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Manufacturer: WMG Model: BMT 105 PTP Year of Manufacture: 2003 Type of Machine : Horizontal Boring Machine Voltage: 400V Frequency: 50Hz Current Rating: 63A Protection Class: IP43 Control Voltage (Uc): 24V DC Machine Specifications: - Control: CNC Heidenhain TNC 124 - Table Size: 1750 mm x 2000 mm - Spindle Diameter: 105 mm - Travel (X/Y/Z/W): - X: 2500 mm - Y: 1850 mm - Z: 1400 mm - W: 700 mm Find more here - / Contact us at -

General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...

Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Aluminum chass ...

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Plexiglass enc ...

Rooftop Air Conditioner CLIMAVENETA WSM2-T 0354 106.2 kW Cooling capacity: 106.2 kW / 30.2 tons Year of manufacture: 2022 Options: Air filter, Wika air flow sensor, 2 pcs. Belimo damper actuators. Refrigerant circuit: 2 pcs. Heat exchanger: Copper / Aluminum Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland scroll ZP104KCE-TFD-477 (scroll) Number of fans: 2 pcs. + 4 pcs. (centrifugal, EC-fans) Type of refrigerant: R410A Dimensions: 6.1 х 2.25 х 2.41 m Weight: 1780 kg Working hours: 0/0/0/0 h. Condition: Outlet, New

Used hot air generator with oil burner Ready for operation at the site

sheet width: 3,5 mm cutting width: 3050 mm weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Piston head for Frech die-casting machine, bronze, 931603, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Piston head for Frech/Müller Weingarten die casting machine, Outer diameter 251.5 mm, thread inner diameter 196.5 mm, height 200 mm, 34 kg

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: ca. 5 t dayligth: 110 mm throat: 40 mm weight of the machine ca.: ca. 50 kg dimensions of the machine ca.: 1,2 x 0,5 x 1,3 m Function: ready for operation: 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information.

This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 min⁻¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.

This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine.

: 6000 kg length: 3000 mm width: 1600 mm height: 570 mm : fest : lenkbar size of tyres: 406 x 127 mm weight of the machine ca.: t dimensions of the machine ca.: 3,99 x 1600 x 570 mm Heavy-duty trailer with - turntable steering - robust, low maintenance - 30mm impregnated wooden platform - Standard paint finish varies. Available in your RAL color upon request. Need other load capacities and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 130 mm spindle bore: 18 mm ratio: 40:1 swivellable: - 10° bis 90° ° groove width: 16 / 18 mm weight: 35 kg dimensions of the machine ca.: 0,5 x 0,25 x 0,25 m Condition: unused: Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.

This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine.

An old hardness tester is offered. It still has the old, extremely stiff frame, which is no longer used today. There are nine Rockwell diamonds, of which at least three are still new.

General SKU288X384 MakeIka Werke TypeMHD 2000/05-ATEX No.200023306 Year of construction2020 Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor60 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 60x150 mm InletDN50 OutletDN32 Number of stages:2 Capacity700 l/h Motor7,5 kW, 400/690 volt, 2910 rpm, (Ex) Rotor speed6000 rpm MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,70x0,40 m Total height1,20 m CEcheck ATEX compatiblecheck Extra SpecificationsTotal cap. 700 l/h, solids cap. Max 500 l/h.Inline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

Steam boiler white Year of Make: 1994 last MOT 2024 Power 6000 kW permissible. Operating overpressure 1.0 bar permissible. Superheated steam temperature 120 degrees Celsius Boiler capacity at N-W 16670 ltr. for firing with chips and wood chips incl. oil burner as a replacement fire option

High-precision lathe DMG Mori Wasino G 100/480 Year of Make: 2017 Control: Fanuc COMPACT line Temperature response (cold start): ø 2.0 μm Roundness: 0.5 μm Technical data: Spindle speed: Drive power: Turning diameter: 285mm Turning length: 280mm Bar Passage: 38mm Travels: X-axis: 480mm Z-axis: 285mm Accessories - 3 pcs of powered tools - Package rigid tool holders - Fire extinguishing system - machine only ran under oil - Chip conveyors

This WAGNER WDE 800x2000 was manufactured in 2010. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Ideal for those looking to enhance their turning capabilities. Contact us for more information.

This 3s JENN-WEI JMY-6020 horizontal turning machine was manufactured in 2015. It features a maximum turning diameter of 180 mm and a turning length of 300 mm, with a spindle speed of 5,000 rpm. The machine is equipped with a Fanuc Oi-TD control and includes a bar feeder, extraction system, and chip conveyor. If you are looking to get high-quality turning capabilities, consider the JENN-WEI JMY-6020 machine we have for sale. Contact us for further details.

This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine.

General SKU205N026 LocationBarneveld MakeWaukesha Cherry-Burrell TypeSP4 2009 Main Features MaterialStainless steel Motor18.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizes+/- dia.80mm Inletdia.47mm Outletdia.47mm Number of stages:1 With mechanical sealcheck Motor18,5 KW, 380/660 Volt Rotor speed2930 Rpm MaterialStainless steel Information No.1000002431623 Mounted on framecheck Floorspace1,4x0,4 M Total height0,7 M Weight300 KGInline high shear mixersWaukeshaMixers > Inline high shear mixersBrand > Waukesha What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 320 mm

Machine type: Automatic band saw Manufacturer: Jaespa Type: W320AZ Year of Make: 2002 Condition: used / gearbox damage Price Vb Location Warstein , Germany Reference number M-JAE-0226 DESCRIPTION We offer you a used band saw from the manufacturer Jaespa. Gearbox needs to be replaced. Weight approx. 2t Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Used Used Case Packer Wrap-Around Baumer Flex 512/3: Year: 2013 Condition: Good Used Case Packer Wrap-Around Baumer Flex 512/3 Year: 2013 Speed: 25 box per minute (8/9.000 bph) Model: flex 512/3 Type of closure: glue Type: with hives inserter Motorization of the independent suction cup arm Type of hives insertion: from below Possibility of use with or without hive inserter: yes Alimentation: voltage: 380v. / 50hz. 3 phases | neutral | earth Air pressure: 6 bar Consumption 40 nl/minute Gluer: preo Storage: capacity 300 boxes Safety protections: yes Code: JL 232 More details: https://bottlingscout.com

Key data: 2500 mm, 2100 mm, 20000 mm

Max Workpiece Diameter: 2,500 mm (over bed) / 2,100 mm (over carriage) Max Turning Length: 20,000 mm Max Workpiece Weight: 50,000 kg (50 metric tons) Main Motor: SIEMENS (164 kW)

Heating elements / heating rod for quail Infra AE NewCeramic( 4 pieces )Infra AE:815/685 400V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Infra AE NewCeramic( 4 Pieces )Quail Infra CE 1360/1230 400V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Infra AE NewCeramic( 4 Pieces )Quail Infra EE 1960/1830 400 V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 Pieces )Piccolo Cross:925/840 230 V 250W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 pieces )Piccolo I:725/640 230V 250W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 pieces )Piccolo II:1325/1240 450W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace New( 4 Pieces )680 / 630mm230 Volt / 350 WattDetails see picture

Heating Elements / Heating Rod for Quail Furnace New( 4 Pieces )Material :Ceramic715 / 630 mm230 Volt / 250 WattDetails see picture

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 pieces )715 / 630 mm230 Volt / 350 WattDetails see picture

Heating Elements / Heating Rod for Quail Furnace New( 4 pieces )680 / 630mm230 Volt / 250 WattDetails see picture