w d used for sale

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/400/H110 mm -Weight: 3.5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/440/H80 mm -Weight: 3.3 kg

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...

gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type SUA 506B IA 81N4 -Speed: 13.7 rpm -Engine: Type WAF81N4 0.75 kW -Shaft: Ø 30 x 125 mm -Protection class: IP55 -Dimensions: 480/210/H240 mm -Weight: 37 kg

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mm swing diameter: 4000 mm turning height: 3150 mm slide adjustment: 1700 mm table load: 25 t turning speeds: U/min Feed: mm/U digital readout: Heidenhain Rest: 2 Side head: total power requirement: 90 kW weight of the machine ca.: 95 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5300 mm swing diameter: 6300 mm turning height: 2800 mm slide adjustment: 1700 mm table load: 50 t turning speeds: 0,3-14 U/min Feed: 0,056-10 mm/U digital readout: Sony Rest: 2 Side head: chip conveyor: total power requirement: 120 kW weight of the machine ca.: 187 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 4200 mm y-travel: 3000 mm dimension of the ram: 380x380 mm ram: horizontal adjustment: 500 mm spindle travel: 1200 mm Radial face slide diameter: 780 mm radial face slide travel: 250 mm rotary table:: Defum type: S-1600 Table dimensions: 1500x1500 mm table travel: 1100 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serial no .: 6749, optional: floor plaates Clamping angle dimensions (WxHxD): approx. 1800x1500x1000 cm, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 660 mm grinding length: 2000 mm workpiece weight: 1500 kg grinding wheel diameter: 400 mm control: X-As. Diatos 602 total power requirement: 12/22/30 kW weight of the machine ca.: t dimensions of the machine ca.: m Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 200 mm material thickness: 3 mm feed length: 999999 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: 6x Option key, 2-stage -Connector: 16-pin -Transport dimensions: 630/370/H140 mm -Weight: 5 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.5 m -Transport dimensions: 400/360/H80 mm -Weight: 3.5 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.5 m -Transport dimensions: 420/380/H80 mm -Weight: 4.4 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Centrifugal quick-release chuck, centrifugal chuck, three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Centrifugal quick-release chuck, centrifugal three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 25-45 mm -Cone mount: Ø 62 mm -Bolt circle: Ø 82 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Precision three-jaw chuck, chuck, faceplate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Mouth size: Ø 200 mm -Bakes: individually and fully adjustable -Interchangeable jaws -Through hole: 55 mm -Recess: Ø 160 mm -Quantity: 1x food available Price: per piece -Weight: 16 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg

end mill, end mill, milling cutter -Outer diameter: 80 mm -Radius: 4 mm -Teeth: 6 -Weight: 1.6 kg

Plug, socket insert, connector -Type: DSTV-SA 24 -Price: per piece -Number: 5x available -Weight: 0.5 kg

Plug, socket insert, connector -Type: DSTV-BL 24 Price: per piece -Quantity: 4x Available -Weight: 0.5 kg

end mill, end mill, milling cutter -Outer diameter: 80 mm -R: 4 -Teeth: 6 -Weight: 1.6 kg

Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

: : tool taper: SK50 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

APV 16" Servo Driven Wire-Cut & Continuous Rope Extruder with Guillotine Cutter APV 16 Servo driven Wire cut and continuous rope extruder with guillotine cutter / Frozen Dough wire cutter originally designed to cut cookies onto waz papaer. - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley controls w Touchscreen - 16" wide two roll extruder - Wire-cut with oscillating knife - Continuous extrusion capable for ropes - Paper feed roller for cutting products onto wax paper - Guillotine cutter for wax paper but can also be used to cut ropes of product to specific lengths - Raising and lowering bed - Die with (5) outlets measuring approximately 0.625" x 1.25" - 3/60/480v - Machine on casters - Footprint approximately 11´ long x 4´ wide Find more here - / Contact us at -

The products to be welded are loaded into suitable holders on a rotary indexing table. Assembly takes place in station 1, laser welding in station 2. The cell is designed as a sit/stand workstation. The products are placed in a rotary indexing table. After turning the rotary indexing table, the machine starts automatically. The machine is equipped with an automatic rotary indexing table, with friction wheel drive. A light curtain is not required. The drive slips in the event of an unforeseen load. Laser welding machine WOLF "Quasisimultaneous" Laser welding machine for "Steller" with semi-automatic rotary indexing table PC and touch screen included Find more here - / Contact us at -

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -

Full creel Wurster Dietz gdzge71 with width understanding passage 710mm stroke 600 engine 90kw fully hydraulic span wagon auxiliary car spalkeil kapsaegge

Wärtsila Lips Drunen LMP REV 1 LMP REV 1 23456789 4306590023 Wärtsila Art No.: W006927795

In-store baking oven WIesheu Type: Dibas Dibas 64 blue S 5 editions for 60×40 cm trays with proofer digital control Self-cleaning program Door with internal sliding mobile on castors Checked & cleaned, very good condition Specifications: Year of Make: 2016 400 V – 50 Hz Dimensions: Height: 207 cm Width: 95 cm Depth: 100 cm

Lips Drunen W006927795 Printed Circuit Board REV 1 23456789 Wärtsila Tuningcenter

WIELOPILA WURSTER DIETZ FR10 WYSOKOSC CIECIA 160MM SZER 850MM SILNIK 90KW PODAJNIK ODBIORNIK ZE ZRZUTEM LASERY

besaummer automat Wurster Dietz fr97 komplete anlage built in 1997

Manufacturer: Steinert Type of Machine: Wet Drum Magnetic Separator Year of Manufacture: 2015 Model: WDS 92 92 [without CE package] Find more here - / Contact us at -

A used electric deck oven Wachtel Piccolo I-4 with 4 shelves each 80x60cm is functionally tested for sale and immediately available. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-4 DMS 3 Master EM Timer K - 4 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box for the generation of steam - with automatic night start function - with exhaust hood - Stove with water connection for steam - Height is adjustable - 19.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 10 / 2010

Bottle Leak Detection System – WILCO Wilcomat R18 SQ/FS High-performance bottle leak detection system designed for quality control in beverage and liquid packaging lines. The WILCO Wilcomat R18 SQ/FS ensures reliable inspection of bottles to detect leaks and maintain product integrity during high-speed production. General Information - Manufacturer: WILCO - Model: Wilcomat R18 SQ/FS - Year of Manufacture: 2006 Technical Specifications - Production Capacity: 35,000 bottles per hour Application - The system is designed for automatic leak detection of bottles in high-speed packaging lines, ensuring that only properly sealed containers continue through the production process. Typical applications include: - Bottled water - Soft drinks - Dairy beverages - Juices and other liquid products Key Advantages - Reliable WILCO leak detection technology - Suitable for hi ...

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

System Installer: DSD Dillinger Stahlbau GmbH Technical Data: - F612 - 2 units each, diameter approx. 0.54m; length approx. 1.5m; volume 155l, built in 1990 - W613 - 1 unit each, diameter approx. 0.46m; length approx. 2.30m; volume approx. 280l, built in 1990 - B613 - 1 unit each, diameter approx. 2.30m; length approx. 2.62m; volume approx. 120l, built in 1990 - 612.3 and 4 - 2 glycol filters each, diameter approx. 0.4m; length approx. 1.6m; weight 0.3t; volume 100l Find more here - / Contact us at -

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Granulator - Wanner D25.38c / Like new (2 pcs.) Year of manufacture: 02/2019 Description: Slow-moving granulator with gearbox Power: 4 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Hopper inlet: 370x330 mm Grinding chamber opening: 385x190 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

diameter:315 mm Speed:max. 2400 min. -1 weight of the machine ca.:25 kg

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

Manufacturer: Indramat, Type: DDS03.1-W050-D, Model: FWA-DIAX02-ASE-02VRS-MS, Serial number: SN268778-18301,

Manufacturer: Indramat, Type: DDS03.1-W050-DA01-01-FW, Model: FWA-DIAX02-ASF-02VRS-MS,