We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,124 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.
used
1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.
used
used
White Temperature Chamber Here we offer a white temperature chamber. White temperature chamber water-cooled Temperature range: from - 70°C to 180°C Temperature change rate cooling 10 K/min Temperature change rate heating 10.0 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ± 2.0 K Test room dimensions: width 580 mm x depth 615 mm x height 750 mm Housing dimensions: width 895 mm x depth 2080 mm x height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW Rated current 26 A Refrigerant: R-404A R-23 Weight: approx. 450 kg Control panel has been updated to a 24 volt version Type: WT11-270/70/10 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with le ...
used
White temperature cabinet Here we offer a white temperature cabinet. Air-cooled White temperature cabinet with S! MCON / 32 controller Test room capacity : approx. 195 litres Test room dimensions: height 750 mm, width 580 mm, depth 450 mm, External dimensions: height 1775 mm, width 870 mm, depth 1600 mm, Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation temporally in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant: R404 A 2.5 kg Gwicht : 490kg Type: WT3 - 180/40 For you as a buyer for security the following information! The following points are ...
used
Current stock: approx. 400 pcs. Included in delivery are: 01x castor, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.556 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...
used
Current stock: approx. 370 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 150 mm Rolls Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: Polyamide Plate abbreviation: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.745 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of deli ...
used
Current stock: approx. 53 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.370 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...
used
Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
used
CNC lathe Webo Roeperwerk in single parts! Machine coerper no longer available! Only spare parts / parts according to the description below. Type Weboturn 400 Control Siemens System 3T ( CNC 3T) items can be shipped, e.g. - Spindle verstaerker - Achsverstaerker, - CNC control, boards etc. - Monitor No longer available: 1. Main spindle with spindle stick 2. Riding stock 3. Ball roller spindle of the x-axis All photos of the machine, control and the boards can be requested on request. The price of the additional information refers to the main spindle motor with Achsverstaerker as described above. Special price
used
Piston, including connecting rod Part number: 110300 / 1101000
used
Flexo machine SMB Type:WDB FD10-6/A304/K1104 6 color UV printing Year 2016 Material width: max. 1050 mm Printing width: max. 1000 mm Material thickness: PET, OPP, aluminum and composite materials 12 – 150 μm Mechanical speed: 0 to 210 m/min. production speed depending on the material, Format length: 400 to 800 mm Repeat adjustment: Gearless Color system: inking unit 1-6 UV colors / inerting DW 1 + 6 Squeegee system: Closed chamber squeegee with pneumatic pump Inching speed: max. 15 m/min. Roll Diameter: 800mm Roll weight: max. 1400 kg Web tension: 20 – 350 N UV drying: IST 6UV Corona treatment device: 1 piece corona device - 3 KW Sonrhey Video web observation : AVT 100% control camera Side edge control : 1 piece web edge control Edge sensor company BST Compressed air : 6-8 bar (water/oil free) With accessories, list on request
used
Now available: Wartsila 32 (original) cylinder heads reconditioned Cylinder heads are pressure tested and come with Class certificate Available from stock (ex Warehouse Bengi NL) Price upon request
-Peak height 240mm -Peak width 1000mm -Control Siemens -Circular permes.about bed 490mm -Umlaufdurchmes.ü.Planschlitten 195mm -Crumpling 520mm -Spindeldurchmes.im in front. Bearing 100mm -Spindle bore 63mm -Torque 736Nm
used
Universal milling machine make WENIG type Wemas 6Fabr. -No: 1347, built in 1998Table clamping surface: 230 x 1000 mmTravel length X: 555 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0transver se Y: 230 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0vertical Z: 420 mmFeed rates along X: 16 - 190 mm / minRapid traverses along X: 1620 mm / minTable can be swiveled: + - 45 °Milling spindle: ISO 40Spindle speeds: 12 - 1138 rpmVertical head swiveling: + - 45 °Distance vertical spindle - table: 0 - 290 mmHorizontal spindle: ISO 40Spindle speeds: 52 - 1138 rpmDistance horizontal spindle - table: 0 - 420 mmDistance spindle - counterholder: 120 mmDrive power: 6 kWWeight of the machine: 1.1 tExternal dimensions L x D x H approx: 1040 x 1000 x 1730 mmWith- Horizontal milling device- Vertical milling head (separately in box)- various accessories- fixed operator panel- ...
Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.
used
Sell a winding number knife, which is Comes. Winding number measurement Measuring range 1-100 000 Wdg. divided into decades 101; 1110; 11100; 111000 Wdg. Multiplication factor x0.1; x1; x10 Measuring frequency switchable 50/60Hz Measurement uncertainty +/- 0.3%Wdg / 0.1Wdg in the case of windings covering the yoke on an equal scale for part u chamber windings up to +0.6% Display sensitivity for a rash of 1% of the year approx +/-0.1% +/-Wdg.
used
Make: WEGER Type: AL 96 Built: 1999 Power: 6700 m3/h Current consumption: 7.65 A 2 pieces Available Price on request Contact details can be found under Contact
used
White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...
used
Complete 48 MW Westinghouse W251-B11 Gas Turbine with a Brush electric generator, 3000 rpm, 50 HZ, 11.5 KV,
used
sour cream filler in plastic cap fi 75, manuf. by Waldner Dosomat 2,4 Germany. Manuf. in 1998 but in very good condition. Capacity 2.000-3.000 cups per hour. The filler includes cups feeder, aluminum foil capper and date printer. Siemens 5 PLC controller.
used
Walter WDPP-410 edger – Polish production – DTR, CE TECHNICAL PARAMETERS: min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/min mains voltage (50 Hz) 3×400 V machine dimensions (length/width/height) 6900 / 1400 / 1380 mm machine weight 1300 kg
new
Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row
Wabäma WSG CLASSIC 460/11 Bread cutting machine / Bread gate 10mm Y.O.M. 1999 Condition: Used as available Manufacturer Wabäma GmbH Model: WSG Classic 460.11 230 V / 3.4 A /0.75 kW Weight: approx. 175 kg Dimensions: approx. 62 x 68 x 128 cm Visit possible at any time on site.
used
double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...
used
ID TR235 Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of sell ...
used
used fermentation room for a Stikkenwagen including air conditioner for bakery, bakery branch and small bakeries. The proofing cabinet is easy to set up and disassemble if necessary as it is built with sandwich panels. High-voltage connection and water connection are available. The door is with exposed glass and large door handle. We have 6 pieces of these closets in stock. More details and pictures on request. for 1 Stikkenwagen 380 volts Stainless steel door Quail / Kunze Sandwich Panels External dimensions 90x140x240cm WxDxH Door entrance height 202 cm
used
x-axis stroke 490 mm axle stroke Y150 mm axle stroke Z 140 mm spindle cone EX 32 / 25 Spindle speed 500-12,000 rpm Total installed power 5 KVa WEIGHT 1800 kg CNC NUM 720
used
Wartsila W12V32 Generator available for Sale. ENGINE MAKE: WARTSILA TYPE: W12V32 SERIAL NUMBER: PAAE065 SPEC. NUMBER: 17390 KW: 5520 RPM: 750 YEAR: 2007 ALTERNATOR MAKE: ABB TYPE: AMG 0900LP08 KVA: 6659 RPM: 750 VOLT: 11000 HZ: 50 YEAR: 2006
Cylinder heads , liners, conrods, with little use, perfect for running.
used
cutting diameter: Ø 520/ 520 x 520 mm saw band length: 7250 x 50 mm cutting width: 1,6 mm cutting speed: 16- 90 m/min power requirement: 11 kW dimensions: m feed in one step: 520 mm multiple feeding length: 2080 mm feed speeds infinitely variable: 0- 400 mm/min weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 570 mm turning length: 2000 mm control: Siemens Sinumeric steady: chip conveyor: turning dia. in gap: 600 mm turning diameter over slide: 340 mm spindle bore: 63 mm Tool changer: total power requirement: 22 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5x1,5x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
15m display 22.5 tons
used
Hello all We have just dismantled 1 Wartsila W8L32 main engine and we have the following spares available 8 pcs cylinder head covers reconditioned exhaust seats bores std. size 8 pcs Piston brand new condition 8 pcs Cyl. Liner brand new condition 8 pcs Water Jacket 8 pcs Connecting Rod 8 pcs Camshaft Pieces 1 piece Crankshaft standard 1 piece Engine Block 1 piece Coupling CENTAX 82 Engine driven pumps , Turning gear , Air cooler, Lube Oil cooler İf interested in anything please contact info@fin-marine.com best regards
used
We have 8 pieces of L32 cylinder heads in our stock in Istanbul Nearly brand new condition with very low working hours crack tested and water pressure tested free of cracks or welding We also have pistons , liners , con rods, fuel pumps and more ... please contact us at: info@fin-marine for more information
used
We have 8 pieces of W8L32 pistons in our stock in istanbul Slightly used in brand new condition with very low working hours All piston ring grooves standart size with measurement report available We also have covers , liners , conrods, fuel pumps and more ... please contact us at: info@fin-marine for more information
used
Pneumatic diaphragm pump manufactured by Wilden model P2
used
- X: 4050 mm - Y: 2050 mm - Z: 250 mm - Clamping area: 4200 x 2150 mm - Speed range: 12 kW - 36,000 rpm - Spindle holder: HSK E40 - Control: MDSI 6.0 on XP computer - Tool changer: 10-fold - Tool diameter max.: 13 mm - Switching hours: 23589 h - Spindle On: 7736 h - Total power: 15 kW - Machine weight: 4900 kg - Space requirement (W x D x H): 6.7 x 3.12 x 2.6 m Details Tool length scanning, spindle type: Reckerth type MSPF-125/36-12/FBLP/HSK-F40, frequency converter company Berges type SWPK 400150 H12, vacuum pump company Busch type RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: company Depureco type T22/100, cooling pump: company Chilly 25-5 Accessories overhauled replacement spindle Reckerth with acceptance protocol, 10 holders with collets, 15 more collets, documentation
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...
used
Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards
used
Universal winch / cable winch make VEB Wilsdruff type 52.3Fabr. -No: 378, TÜ no. 5/4060/139, built in 1990Technical specifications:Tensile force: 3 kN (300 kg)Cable speed: 10 m / minRope diameter: 8 mmPermissible number of rope systems: 4Motor power: 0.55 kWWeight: 140 kgWith- hook- Control buttonsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Drilling and parting lathe make WEIPERT type WPBA 710Machine -No: 16717 built in 1961Technical specifications:Distance between centers: 2500 mmCenter height over flat track: 710 mmTurning diameter over bed: 730 mmBed width: 580 mmSpindle bore: 230 mm16 spindle speeds: 14 - 450 rpm.Drilling depth: 1200 - 5700 mmDrive power: 25 HPused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hot press for manufacturing grinding wheels
used
Hot press for manufacturing grinding wheels
Rollers for SM 52-2 2 new application roller d 64.5 _____250 EUR /pcs. 2 new application roller d 61 _____244 EUR / pcs.