w 75 used for sale

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Due to new motorization, this Reintjes gearbox type WAF 763L with subzetsung 5.750: 1 half May 2026 is available The shooting hours is dan Umnabei 64.000

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weighing fraesing machine WEILER FHP750, table 750 / 200 mm, 550 / 180 / 400 mm

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Dimensions (L/W/H): 1100x1500x2100 mm Weight: 800 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Compressor Worthington Rollair RLR 750 BM 6 500 T with Hankison refrigerant-air dryer with approx. 28,000 operating hours fully automatic, internally completely piped and wired compact system, single-stage oil-injected, air-cooled, silenced Operating pressure 10 bar Volume flow 40 m3/hour Capacity 5.5 KW Boiler 500 litres ROLLAIR_550_2000_EN

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB120x50 Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Wago, controller Ethernet switch from injection molding machine Demag D 100-275 NC -Type: 750-842 -Dimensions: 70/50/H100 mm -Weight: 0.2 kg

Fieldbus, Profibus, PLC control, automation technology, controllers and regulators, end module, fieldbus controller, PLC terminal -Manufacturer: Wago, end module from Demag D 100-275 NC injection molding machine -Type: 750-600 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12,000 1/min IKZ 30 bar Belt filter system Probe Tool magazine for 30 Wkz. SK 40 Conveyor

Fieldbus, Profibus, PLC control, automation technology, controls and regulators -Manufacturer: Wago, fieldbus coupler type: 750-323 -End module: 750-600 -Individual components: see photos -Dimensions: 70/60/H100 mm -Weight: 0.2 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal 3 pieces -Type: 750-402 -Shipping/Price: complete -Dimensions: 70/40/H100 mm -Total weight: 0.2 kg

Voltage tester, Duspol, voltmeter -Manufacturer: Wobla, voltage tester -Voltage range: 220-660V 0.05-0.25A / 110-750V 0.2-1.5mA -Number: 55x voltage testers available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: 260/100/H40 mm -Weight: 0.3 kg/pc.

Plunger Pump, High Pressure Pump, Homogenizer, Plumger Piston Pump, Plunger Piston Pump Manufacturer: WOMA Apparatebau GmbH Type: 753.50 max pressure 150 bar Flow rate approx. 175 l/min Engine Power: 55 kW 1500 rpm 380/660 volts 50 Hz Dimensions approx. 1800 x 1000 x 750 mm

Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod

Name: RYOBI 756 P Wide + LX ID PP-51060 Category 6-Colors Manufacturer Ryobi Model 756 P Wide + LX Year 2008 Color 6 Impression 45 Working Hours - Speed-- Max. size 60 × 78 cm Min. Size - Condition Good Location Europe Availability Immediately Description • 6 colors and varnish • Extended Delivery • Chamber Duct System: Harris + Bruno • Ink Remote Control: PCS-G • Combi Cooling Unit: ConTemp • Automatic Plate Change: SAPC • Inking Unit Temperature Control (Inking roller cooling) • Automatic Register Control • Automatic Wash-up System • Antistatic system • Grafix Digital 3000 IR Dryer

General SKU251U306 LocationBarneveld MakePfaudler No.50626 Year of construction1990 Pressure Working pressure0 Bar Number of horizontal pressure tanks1 Main Features MaterialGlass Volume750 Ltr. Pressure0 Bar Specified Features - Horizontal tank MaterialGlass - Enamel (WWG) Horizontal tanks Capacity750 Ltr. Vessel sizesDia: 1000x1800mm Dished bottomcheck Dished frontscheck Manhole2x side, dia: 900 mm Top connectionscheck OutletDN50 Max. temperature+100ºC Information Mounted on legscheck Floorspace1,0x2,4 mtr Total height1,8 mtr Weight780 kgHorizontal tanksPfaudler-werkeTanks > Horizontal tanksBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...

Dimensions (L/W/H): 2200x2600x1800 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.

x-travel: 1.100 mm y-travel: 900 mm z-travel: 1.250 mm control: SIN 840 D spindle turning speed - gearbox stage 1: 20 - 1.333 1/min. spindle turning speed - gearbox stage 2: 1.333 - 8.000 1/min. power capacity at 60% / 100 % load: 50 / 37 KW tool taper: SK50 B - axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 500 U/min feed X/Y/Z/-axis: 1 - 60.000 mm/min rapid traverse: 60 m/min feed capacity X/Y/Z: 17 kN numbers of pallets: 2 pallet size: 800 x 800 mm table load: 1,50 t tool magacine with: 120 Plätzen tool length - max.: 600 mm tool diameter: 135 mm wotkpiece diameter with 2 vacant positions: 350 mm weight of tools max.: 60 kg total power requirement: 150,00 kW weight of the machine ca.: 35,00 t dimensions of the machine ca.: 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation, Pallett-changer with 2 palletts and hydr.  ...

Key data: 1500 kN

Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length/Wid ...

diameter: div. number: 75x tool adaptor: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rail power supply, power supply terminal, digital input terminal, digital output terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Wago, potential feed-in terminal -Type: 750-602 -Quantity: 1 piece available - Price: per piece -Dimensions: 15/67/H100 mm -Weight: 0.1 kg/piece

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Wago, 8-channel digital input terminal block -Type: 750-431 -Quantity: 1 piece available -Dimensions: 15/67/H100 mm -Weight: 0.1 kg

max. format 60 x 78 cm Year of construction 2008 PCS-G color remote control PDS-E Quality Control Ryobimatic Film Dampening Units Technotrans cooling unit RPC Semi-Automatic Plate Changing Automatic washing equipment Ultrasonic double sheet control Electrifying device Dry pollinator Grafix Digital Powder suction Stack delivery Reading totalizer: approx. 93 million pressure

General SKU068Z267 MakeWila Maschinenbau Sollstedt TypeHOGD-M-750 LTR No.0654 Year of construction1995 Mounted on legscheck Main Features MaterialStainless steel Volume750 Ltr. Motor15 KW Specified Features - Pre-mixer MaterialStainless steel 1.4301 (304) Pre-mixer(1x) Fountain mixercheck Capacity750 Ltr Vessel diameter1400mm Cylindrical height600mm Conical height800mm Inletdia. 300mm With inspection valve480x560mm Outletdia. 150mm Motor15,0 KW + 4,0 KW (Mischwelle/Mischzylinder) Information LocationBarneveld With switchcheck Floorspace1,9x1,6 M Total height3,4 M Weight1800 KGPre-mixersDiscountWila SollstedtMixers > Pre-mixersDiscountBrand > Wila Sollstedt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

x-travel:1.100 mm y-travel:900 mm z-travel:1.250 mm tool length:750 mm rapid traverse in x-y-z axis:60 feeding capacity X Axis:17.000 daN feed capacity Z - max.:17.000 N spindle taper:SK50 max. workpiece weight:1500 kg revolutions per minute:10.000 U/min pallet table size:630 x 630 mm tool magazin::165x (bis D=125mm), 21x (bis D=225mm), 8x (bis D=350mm total power requirement:37 kW

x-travel:1100 mm y-travel:900 mm z-travel:1250 mm b-axis:360 000 x 0,001 ° milling head speed:1 - 10000 U/min spindle taper: ISO:50 rapid traverse:60 m/min pallet size::630 x 630 total power requirement:37 kW weight of the machine ca.:25 t with CNC control SIEMENS 840 D autom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kg through spindle coolant chip conveyor and coolant attachment make KNOLL

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 5.750 Litre Measurement and Weight: Total Height: 4400 mm Tank Body Height: 3325 mm Diameter: 1600 mm Weight: 2110 kg Uni 3750 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure cooling jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Jacket and walls 9 mm. On cylindrical part of a cooling jacket as double jacket about 2.500 mm high. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upp ...

Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed frequency converter .. Please ask if needed Features: Construction year: 1999 condition: good (used) Conveying length in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,7 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hör ...

GTA Normlifter 750 Year of construction : 2014 Hours: 6100 Condition: ready for use Price on request

Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fra ...

Manitou MT1033 Easy 75D ST5 S1 Telescopic Loader, - Year of construction: 2021, - Nominal power: 55.40 kW, - Net weight: 7950 kg, - Maximum speed 20 km/h, - Range: 7.15 m, - Hook height: 9.98 m

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,38 t dimensions: 2,0 x 1,0 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,35 t dimensions: 1,2 x 0,8 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,55 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,5 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,99 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,8 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,3 t dimensions: 1,0 x 1,0 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.