w 75 used for sale

Nijhuis Water Technology BV waste water system, type: NWT 198105, Varisco pump, type: N8N6 32-26 325, serial number: 909-2008, 15 kW, total dimensions: 3750 mm x 2250 mm x 3500 mm.

Nijhuis Water Technology BV flotation washer, dimensions: 3800 mm x 2550 mm x 2500 mm. Incomplete.

Manufacturer: Lancer (Getinge) Model: 1300 UPSS Year: 2008 Type: Laboratory washer-disinfector / dishwasher Application: Cleaning / washing of laboratory glassware and instruments Maximum power : 13,5 KW Accessories: grid baskets, injector baskets and mixed baskets Multi-stage direct injection cleaning. Cleaning: mechanical, thermal and chemical. Multiple programs. Interior volume: 160 L Maximum load: 51 KG

Description: Cross belt unit Wide belt unit ( contact roller ) Wide belt unit (combi) Wide belt unit (cushion) Brush unit Sanding pad Working width 1350 mm Working height 850 mm Workpiece height 4 - 150 mm Hours read off approx. 5'745 without laptop and without sanding time recording without hand scanner and without compressed air lines on the machine Replaced parts: Replaced brake module from the sanding belt and frequency converter from the feed, with operating instructions and CE certificate serial number: 91.445.30, total electrical load: 73 kW, hollow height: 4-150 mm, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,350 x 2,440 mm, weight approx.: 5,000 kg

Description: • Wood chipper, wood waste shredding machine, wood shredder • Serial number 500-5944 • Main motor power 18.50 KW • Rotor length 600 mm • Rotor diameter 256 mm • Rotor rotation speed approx. 90 rpm • Hopper volume approx. 430 liters • Dimensions of the hopper loading opening approx. , 800 x 600 mm Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 2,600 mm, weight approx.: 1,500 kg

CNC wide belt grinding machine, manufacturer: WEBER, type: KSF-2-1350, year of manufacture: 2007, serial no.: 92.445.66, weight: 3,500 kg, CNC control SIEMENS SIMATIC, touch panel, 1 batch of abrasive belts and accessories

Initial registration: January 19, 2021 TÜV until September 2024 Ab. Total weight: 400 kg

3 Wolf Klimatechnik air treatment cabinets, type: KG 630, serial numbers: (2x) 9073 / 9083, heating: 335.3 kW, volume: 49.000 / (2x) 45.000 m³ per hour, total dimensions: (3x) 11120 mm x 2530 mm x 2560 mm and dimensions air shaft: 14700 mm x 1840 mm x 2330 mm.

4 Wolf Klimatechnik air treatment cabinets, type: KG 630, serial numbers: 9073, cooling: (2x) 201.8 kW, heating: (2x) 201.8 kW, volume: (2x) 43.000 / (2x) 41.600 m³ per hour, total dimensions: (2x) 5020 mm x 2330 mm x 2850 mm and (2x) 6630 mm x 2330 mm x 2650 mm, dimensions air shaft: 7000 mm x 1600 mm x 2390 mm.

Description: Payload: 4kg Robot control: YA-1QAR42 Welding manipulator: YA-1RJB11 MYFRA PEDIA cooling system 2x manually rotating welding tables Safety cage Approx. Onsite Dimension. (l x w x h): 4,000 x 4,000 x 2,300 mm, weight approx.: 700 kg

Description: Device no. 119481, voltage: 3x400 V, 50 Hz, more details: see photos Approx. Onsite Dimension. (l x w x h): 500 x 330 x 320 mm, weight approx.: 24 kg

2 parts for Weber skinning machine, working width: 750 mm, total dimensions: (2x) 1000 mm x 130 mm.

Weber Maschinenbau GmbH mobile sharpening machine, type: KSG, number: 391, year of construction: 05/2008, 400 V, 50 Hz, 0.18 kW, dimensions: 800 mm x 800 mm x 1200 mm.

Description: The Sapiens 1001 TFF machining centre is dedicated to sawing, routing and drilling components for the production of windows and doors. The structure is a type of bridge with a fixed portal. The cross beam is mounted on rigid, sturdy columns, which are based on the ground by means of levelling and alignment units, both transverse and lateral. The base of the column from the part reference side is connected to the central structure of the die, where the clamping systems and X-axis for part positioning are integrated. The machine entrance and work areas are equipped with vertical and lateral pneumatic pressure devices, which ensure that the workpieces are correctly positioned against the lower and lateral reference of the clamping system. The clamping units slide along the X axis and position the workpieces in the work zones according to the machining to be carried out. In pa ...

Description: Composed of: N°1 welding machine WELLER WD2M N°1  ,welding machine Various welding tips Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 15 kg

Description: Contents consisting of sockets, a socket box, Allen keys, open-end wrenches, pliers, screwdrivers, files, twist drills, wire strippers, hammers Approx. Onsite Dimension. (l x w x h): 820 x 500 x 1,100 mm, weight approx.: 150 kg

Description: Content consisting of various hooks, screws, washers, nuts, Allen screws and other small parts Incl. the entire shelving system Approx. Onsite Dimension. (l x w x h): 8,000 x 600 x 1,950 mm, weight approx.: 400 kg

Counter pressure filler for sparkling wine     18 valves with pre evacuation and filling level adjustment   machine is currently in overhauling and will be ready in August 2023 More then 300 machines new and second hand on our seema .de

Double end tenoner for massiv wood panels Brand: Wehrmann Type: Combima Year: 2007 Wehrmann designed: sturdy, high quality and NC controlled - The IMA Combima machine chassis makes our machine very sturdy - This machine is modular equipped with the below listed units - Heesemann as a High-Quality brand supplied us with their sanding technology - NC controlled with grinding units 1 motorized width adjustment max. working width: approx. 2,500 mm min. working width: approx. 280 mm low-maintenance precision roller transport chains, with 80 mm wide and 85 mm long chain plates, driver cams, distance 1,080 mm, pneumatic cam control at 3 heights (6, 12, 18 mm) 2 top prints, electromechanically height-adjustable, each with a double composite V-belt 80 wide, left and right; Motorized height adjustment via axle working height approx. 950 mm electronic frequency contro ...

CNC working center Weeke Type: Professional BHC 600 Year of construction: 2003 TOOL CHANGE SPINDLE 12 KW - HSK F63 INCL. LIQUID RECIRCULATION infinitely variable 1,250 - 24,000 rpm. programmable max. 9/12 kW in continuous/intermittent operation (S1/S6-50%) WORKING LENGTH X AXIS 7250 MM WORKING WIDTH Y-AXIS 1300 MM AUTOMATIC TOOL CHANGE MAGAZINE FOR 8 PLACES (PLATE CHANGER) AUTOMATIC TOOL CHANGER M. 18 MAGAZINE PLACES Automatic tool changing system in the X direction riding on the machine stand AGGREGATE INTERFACE F.D.MAIN SPINDLE, To accommodate the adapter units including interface Pneumatic and swivel drive C-axis with Torque entrainment and 3-point support VERTICAL DRILLING UNIT, 26 SPINDLES Drive: 1.5 kW 11 spindles with step 32 mm in X-direction 11 spindles with step 32 mm in Y-direction 4 spindles with step 50 mm in X-direction Spindle type: indiv ...

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit Possible execution: - spindle drive: for one or two gluing units - bayonet adapter: for one or two gluing units

Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago. max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar. Material to be processed: welding and staple wire, max. tensile strength: 1600N/mm². Wire diameter: 0.8 - 1.0 - 1.2mm, tolerance on max. diameter: 0.05mm. Support: K300 - D300, weight of spools/wire baskets: 15 - 18 - 20kg, weight: approx. 3000kg, mit Dokumentation.

Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.

Description: Manual available at this LINK Minimum working size 40 x 25 mm Maximum working size 200 x 105 mm Working length 200 - 3500 mm X1 Axis Stroke: 6120 mm X2 Axis Stroke: 6120 mm X3 Axis Stroke: 6200 mm X4 Axis Stroke: 6200 mm CU Axis Stroke: 1620 mm Y1 Axis Stroke: 4000 mm Y2 Axis Stroke: 4000 mm Y3 Axis Stroke: 4000 mm Z1 Axis Stroke: 440 mm Z2 Axis Stroke: 440 mm Z3 Axis Stroke: 620 mm V1 Axis Stroke: 1100 mm V2 Axis Stroke: 1100 mm1 W Axis Stroke: 230 mm A Axis Stroke: 180° C Axis Stroke: 360° SP1 Spindle Power: 14 kW SP2 Spindle Power: 14 kW SP3 Spindle Power: 12 kW Tool changer magazine with 62 positions Max tool diameter 200 mm Tool attachment HSK 63 Blade group power 2.2 kW Blade diameter 200 mm Total power 55 kilowatts SINUMERIK HMI control WARNING! Belts, elastic bands, and photocells of loading and transfer systems require maintenance. ...

Description: Turntable: ø1650 mm Drive with chain Loadable up to 2000 kg Pallets up to 1200x1200 mm Rotation speed: adjustable, frequency controlled, exact position stop Film carriage: frequency controlled, for standard machine roll, film: 17 to 35 µm Motorized front rack, equipped with photocell Wrapping height: 2400 mm Power supply: 230 V/1~N/50 Hz,1.39 kW Protection rating: IP54 Operating temperature: +5 to +40 °C . Approx. Onsite Dimension. (l x w x h): 2,600 x 1,600 x 2,700 mm, weight approx.: 1,000 kg

Technische Daten: - min./ max. Sägeblattdurchmesser 100 mm / 750 mm - min. /max. Sägeblattbohrung 16 mm / 55 mm - Zahnteilung 7 - 100 mm - max. Sägeblattstärke 6,0 mm - Vorschubgeschwindigkeit 25 Zähne / min. - Schnittwinkel -10C / + 30C - Gesamtleistung 3,0 kW - Schleifscheiben Durchmesser 100 mm - Schleifscheibenbohrung Durchmesser 25 mm - Motor Schleifaggregat 0,75 kW - Leistung der Kühlmittelpumpe 35 L/min. - Spannung 400 V / 50 Hz - hydraulisch angetrieben, Microprocessor gesteuert - für Brust- und Rückenschliff - Planschleifen von Zähnen in einem Zyklus - hydraulische Sägeblatt Klemmung - Schutzkabine - einfache Steuerung für einfache Bedienung - unabhänig voneinander einstellbare Schleif- und Vorschubgeschwindigkeit - Abmessungen L=1100, B=1500, H=2100 mm - Gewicht 800 kg

Weighing fraesing machine WEILER FHP750, table 750 / 200 mm, 550 / 180 / 400 mm

Waldrich Siegen Ø 1900 x 7500 mm Distance between centers: 7500 mm Swing over bed: 1900 mm Swing over cross-slide: 1650 mm Power on main spindle: 150 HP

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Description Compressor Worthington Rollair RLR 750 BM 6 500 T with Hankison refrigerant-air dryer with approx. 28,000 operating hours fully automatic, internally completely piped and wired compact system, single-stage oil-injected, air-cooled, silenced Operating pressure 10 bar Volume flow 40 m3/hour Capacity 5.5 KW Boiler 500 litres ROLLAIR_550_2000_EN

751-110/6-1 AA-2 380 V No. 208833/2

Clamping force [kN] 1800 Clearance between columns (hxv) [mm] 580 x 520 Min./max. mold height [mm] 225-550 Injection unit Screw diameter [mm] 45 Shot weight [g] 325,6 Injection pressure [bar] 2100

The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal -Manufacturer: Wago, end module from Demag D 100-275 NC injection molding machine -Type: 750-600 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg/pc.

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Wago, controller Ethernet switch from injection molding machine Demag D 100-275 NC -Type: 750-842 -Dimensions: 70/50/H100 mm -Weight: 0.2 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Wago, 8-channel digital input terminal -Type: 750-431 -Number: 1 piece available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Wago, potential feed terminal -Type: 750-602 -Number: 1 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

- X: 750 mm - Y: 500 mm - Z: 500 mm - Table size: 490 x 950 mm - Speed range: 9,000 rpm - Spindle mount: SK 40 - Internal coolant supply: yes - WZ changer: 20-speed - Control: Heidenhain 426 / 430 CB - Control ON: 36299 h - Program run: 16867 h - Total power: 25 kW - Condition: good, ready for immediate use - Machine weight: 4000 kg - Space requirements (W x D x H): 2.7 x 2.2 x 2.4 m Details Coolant tray, no chip conveyor Accessories Documentary, 9 SK40 recordings

General SKU068Z267 LocationBarneveld MakeWila Maschinenbau Sollstedt TypeHOGD-M-750 LTR No.0654 Year of construction1995 Main Features MaterialStainless steel Volume750 Ltr. Motor15 KW Specified Features - Pre-mixer MaterialStainless steel 1.4301 (304) Pre-mixer(1x) Fountain mixercheck Capacity750 Ltr Vessel diameter1400mm Cylindrical height600mm Conical height800mm Inletdia. 300mm With inspection valve480x560mm Outletdia. 150mm Motor15,0 KW + 4,0 KW (Mischwelle/Mischzylinder) Information Mounted on legscheck With switchcheck Floorspace1,9x1,6 M Total height3,4 M Weight1800 KGPre-mixersWila SollstedtMixers > Pre-mixersBrand > Wila Sollstedt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

Inv. Num. : 5723 Type: GDK 750 Producer: Weingarten Created: 1987 Parameters: Clamping force: 866 t Plate size: 1280x1280 mm Distance between tie rods: 790x790 mm Tie rod diameter: 165 mm Closing stroke: 850 mm Opening the mold: 400-900 mm Injection force: 73 t Injection positions: 40/170/300 mm Weight: 36000 kg Machine dimensions: 8250x2000x3400 mm Equipment: Krownmatic KM 1200 Oven (2011)

Key data: 3000 kN

Wittmann Battenfeld EcoPower 300/750 / Electric machine / production line with Wittmann W821 robot and conveyor belt Year of construction: 2012 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1250x1110 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6S - Touchscreen Additional equipment: Production line with Wittmann W821 robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Perfect technical condition Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Automatic tool height adjustment It is possible to change the screw diameter for fi 35, 40, 50 mm Robot Wittmann W821 Year of construction: ...

Unused Hermann Waldner 755 litre total capacity stainless steel 316 L vertical reactor, working capacity approx. 600 litre. Internal polished Ra ≤ 0.4; internal dimensions 900 mm diameter x 975 mm straight side height x approx. 2100 mm total height. Has bolted dished top and welded dished bottom heads. Internal rated -1/4 bar maximum pressure at -10/150°C maximum internal temperature. Stainless steel jacket rated -1/6 bar maximum pressure at -10/150°C maximum temperature, jacket is insulated claded by stainless steel. Has bottom entry agitator driven through gear box by 0.75 kW, 1440 rpm, 50 Hz electric motor; adjustable speed of the agitator. Top head connections include (1) DN150 diameter manway. Central bottom discharge. Includes control panel with product temperature display, pressure display and agitator speed display. Mounted on (4) legs with wheels.

Unused Hermann Waldner 755 litre total capacity stainless steel 316 L vertical reactor, working capacity approx. 600 litre. Internal polished Ra ≤ 0.4; internal dimensions 900 mm diameter x 975 mm straight side height x approx. 2100 mm total height. Has bolted dished top and welded dished bottom heads. Internal rated -1/4 bar maximum pressure at -10/150°C maximum internal temperature. Stainless steel jacket rated -1/6 bar maximum pressure at -10/150°C maximum temperature, jacket is insulated claded by stainless steel. Has bottom entry agitator driven through gear box by 0.75 kW, 1440 rpm, 50 Hz electric motor; adjustable speed of the agitator. Top head connections include (1) DN150 diameter manway. Central bottom discharge. Includes control panel with product temperature display, pressure display and agitator speed display. Mounted on (4) legs with wheels.

Description: serial number: 6.081981 power: 7,5 / 8,5 kW Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,600 mm, weight approx.: 750 kg

Wittmann Accessories Type: W620M -636, Robot System Control: C61-585 Built: 2003 Dimensions and weights Machine weight Kg: 500 Other Removal X- Axis 300 mm PNE Vertical Y- Axis 1000 mm PNE Horizontal Z-axis 1250 mm MOT

Waldrich-Coburg leadership roads and surfaces sanding machine type: 0-15 SNC 2520 X/3 m Max.-Schleiflaenge: 3420 mms Max.-Schleifbreite: 1450 mms Max.-working height: 1005 mms Aufspannflaeche length: 3000 mms Aufspannflaeche width: 1250 mms accessories: -table fine adjustment -Papierbandfilter-Anlage -Schipmke-Haan DK150 V - back chill arrangement surface need: L=11,8m B=4,9m H=4,7m weight: 29.4 to . their prize image we await with pleasure. OTHER: the machine still stands live and can be visited any time.

2 units Wartsila gas engines Model W16V34SG Make Wartsila, Finland Installation date G3 - 31/03/2011 & G4 - 26/03/2011 Rated output (kW) 6375 Rated speed (RPM) 750 Number of cylinder 16 Nos. Swept volume via cylinder(dm3) 36.3 Compression ratio 12:01 Mean effective pressure (bar) 19.8 Mean piston speed (m/sec.) 10 Cylinder bore X stroke (mm) 340 X 400 Cycle stroke four stroke Starting system compressed air (30 kg/cm2) Supercharging system exhaust gas turbocharger Lubrication forced lubrication (engine driven pump) Fuel natural gas Configuration V type Generator make AVK Generator nominal output (kVA) 7968 Voltage (kV) 6.6 Frequency (Hz) 50 Power factor 0.8 Operating hours 13,500 each since installation in 2011.

Robot WITTMANN W643, Control: CNC 6.2 Horizontal axis Z : 10000mm Demoulding axis X : Robot 1: 1200mm, Robot 2: 1200mm Vertical axis Y : Robot 1: 2600mm, Robot 2: 2600mm 2 vacuum, 3 pressures Euromap 12