w 75 used for sale

Pressure regulating directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 5350210030 -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Ignition device for Jenbacher Manufacturer: WOOD WARD Model: IC-920 Serial No.: 15119859

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with: slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M2-7 -Recording: MK2 -Dimensions: 100/290 mm -Weight: 2 kg

Digital input device, Interbus -Tele-Link Version: 2.0 Siemens S5 -Weight: 1.7 kg

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ignition device for Jenbacher Manufacturer: WOODWARD Model: IC-920 Serial No.: 15152511

Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 60 rpm -Power: 0.10 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Dimensions: 245/130/H110 mm -Weight: 3.8 kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: Ø 32 -Clamping sleeves: 4/6/10/12/14 mm -Price/Sale: complete -Total weight: 1 kg

We are selling here a Menger from the manufacturer Stork u. Herrmann, type KM 90D in a very good used and functional condition. The machine runs on 400 volts, built in 2020, rollable, completely stainless steel, 90 litres, workshop tested, ready for immediate use, dimensions W/D/H 80/110/120 cm, others on request.

Gebrauchtmaschine

Metal band saw blade, band saw blade, metal saw band -unused, original packaging -Number: 4 sheets available Price: per piece -Tooth pitch: 4 TPI -Dimensions: 5990 x 34 x 1.1 mm

Metal band saw blade, band saw blade -unused -Number: 7x sheets available -Price: per piece -Toothing: 6/8 -Dimensions: 4570 x 41 x 1.7 mm

Three-jaw chuck, three-jaw lathe chuck -Clamping plate -Mouth size: Ø 160 mm -Quantity: 2x food available Price: per piece -Weight: 7 kg

N. 14 cut bar trolleys Measurements: 1.77 width x 2.07 depth x 2.3 height m. Each slot is calibrated to 10 kg.

Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg

Pressure reducer, pressure regulator -Type: 002 3539 -Connection: Price: per piece -Number: 6 available -Weight: 0.5 kg/piece

centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Roller chain, drive chain -Type: 08 B-1 -Length per package: 5 m -Price: per chain -Number: 3x available -Weight: 3.5 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -with burner body -Length: 8 m -Weight: 6 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

Fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor -Manufacturer: Wenglor, fiber optic cable sensor unused in original packaging -Type: UF87PA3 -Number: 3x sensors available -Price per piece -Dimension box: 105/90 / H40 mm -Weight: 0.2 kg / pc.

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation -Dimensions: 305/210/H110 mm -Weight: 4.2 kg

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter, face milling head, milling head -Manufacturer: Widax-Heinlein diameter 173 mm -Type: M400 Ø160 R 12 607 -Number of teeth: 12 -Adjustment: SK50 -Dimensions: Ø 173/260 mm -Weight: 12 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: WMW, live centering tip, 2 pieces -Type: ZN 205 -Recording: MK5 -Price/Sale: complete -Overall dimensions: 270/190/100 mm -Weight: 10 kg

Machine Type: Kieserling Nine-Roll Straightening Machine Working range rods Ø 5 mm to Ø 30 mm Flow direction: from right to left Speed approx. 40 m/min Made by Kieserling & Albrecht, type WRUW 1 Length 2,060 mm Width 1,450 mm Height 1,500 mm Weight 3,700 kg Country of origin: Germany Delivery time by arrangement Other: The machine is currently being completely overhauled by our specialist company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

Machine Type: Kieserling Nine-Roll Straightening Machine Working range tubes and rods Ø 5 mm to Ø 30 mm Flow direction from right to left Speed 40 m/min Make Kieserling, type WRUW 1 Location Solingen Length 1,600 mm Width 1,400 mm Height 1,600 mm Weight 3,700 kg Country of origin: Germany Delivery time approx. 4 weeks Other: The scope of supply of the machine includes the complete finishing for loading and removing the straightening material, consisting of: pre-bearing with roll-off slope, infeed channel with pusher, discharge channel with ejector, roll-off slope, collection belt trough.

Machine Type: Kieserling Seven-Roll Straightening Machine Working range tubes from Ø 15 mm to Ø 75 mm, rods Ø 20 mm to Ø 65 mm Flow direction from right to left Speed approx. 50 m/min Make Kieserling, type WRUN 1A Location Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is currently being completely overhauled by our specialist company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7

collets: 3 - 20mm tool taper: Sk 430 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set 21 pieces Collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. Recording SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TIG hose assembly, welding torch, hand welding torch, TIG torch -with burner body -Length: 4 m -Tuchel connector: 5-pin -Water: chilled -Weight: 2.7 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.

Grinding lenght 6000 mm Grinding diameter 1050 mm

fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA10 -Shaft: Ø 36 mm -Measurements: see photos -Number: 15x universal joint available -Price per piece -Dimensions: 120/62 / H56 mm -Weight: 1.1 kg / pc.

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA09 -Shaft: Ø 24 mm -Dimensions: see photos -Number: 4x universal joints available -Price: per piece -Dimensions: 102/46/H50 mm -Weight: 0.6 kg/pc.

- Convection oven from Wachtel with clipboard, proofer and exhaust hood - Convection oven is Thermico Plus with IQ Air control - Oven is for 5 trays 60x40cm - Proofer is for 16 trays 60x40cm -Electrical. Connected load: 13.7 kW - Year of construction: 11 / 2017 Dimensions: - 97cm wide - 85cm deep - 205cm tall

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg