w 75 used for sale

Immediately available Completely overhauled in-store air coolers

Immediately available used injection pump

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Admission wheel recess: Ø 160 mm -universal: applicable -Number: 2x motors available -Price: per piece -Dimensions: 190/190/H342 mm -Weight: 70 kg/piece

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 4 kW 960 rpm -Max. Delivery rate: 2.58 m³/h -Max. Pressure: 3 bar -Max. Temperature: °C -Dimensions: 730/350/H310 mm -Weight: 88 kg

Kaplan turbine Escher Wass with standing shaft, used very good condition Gradient 7.00m-7.2 m Water volume 6000l/sec, power 500 hp, speed 375T/min

-Planetary Mixer Manufacturer: Wodschow & Co Denmark -Type: R 150 -without boiler and without tools

Immediately available recon Smierölfiter housing

Machine vice, vise, drill press vise -Jaw width: 160 mm -Jaw height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg

FKS 315-1500E Sliding table saw Trimming length 1220mm Saw Blade Diameter 315mm Cutting height 100/75mm Cutting width with stop 940mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 2,4kW 400V Weight approx. 210kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900315

Gear motor, electric motor, three-phase motor -Connection: 400/230 volts -Power: 0.45 kW -Rotation speed -Construction: B5 angle -Diameter shaft: Ø 10 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 190/160/H100 mm -Weight: 2.5 kg

Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Dimensions: 380/190/H90 mm -Connection: 230 V -Number: 11 lights available -Price: per piece -Weight: 1.9 kg/piece

PackLab WING REPC FWB60 self-adhesive labelling machine for front & back labelling for cylindrical, oval or rectangular shaped bottles, etc., 2 label applicator type M60 DX 250, label speed 60 m/min., outer diameter of the label reel max. 400 mm, core diameter of the label reel 45-75 mm, label carrier tape with a maximun height of 250 mm, label width from 15 up to 480 mm, maximum label height approx. 245 mm, conveyor width 80 mm, top stabelising belt, press-on belt with a height of approx. 110 mm, electrics 400V/50Hz/3PH, machine floor space approx. 4140 x 3000 mm (LxW), machine height approx. 1900 mm, machine net weight approx. 950 kg

Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 295 mm -Length: 496 mm -Height: 95 mm -Plate thickness: 30 mm -with: support ribs -Weight: 30 kg

WEISHAUPT FUEL BURNER - IN WORKING ORDER - LITTLE USED -

Waukesha Rotary lobe pump 060 7,5 KW 1440 RPM Excellent condition

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 180 mm -Plate thickness: 25 mm -with: support ribs -Weight: 90 kg

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 270 x 105 x H 65 mm -Connection: 24 V DC 2x6 W -Number: 1x lights available -Price: per piece -Weight: 8 kg/piece

Gearbox, planetary gear for hydraulic motor, hydraulic motor, oil motor, hydraulic pump -Condition: unused -Drive shaft: Ø 14 mm -Output shaft: Ø 22 mm -Translation: 1:10 -universal: usable -Quantity: 1 piece available -Dimensions: 90/90/H150 mm -Weight: 4 kg

PROBAT UW 801 MILL IN GOOD WORKING ORDER - SOLD WITH A PAIR OF SPARE CYLINDERS - WITHOUT ELECTRICAL CABINET - THE INSTALLED CYLINDERS ARE IN VERY GOOD CONDITION - CAPACITY: +/- 1000 K / H - PROVIDED FOR WATER COOLING (TO BE RENOVATED). IMMEDIATELY AVAILABLE

Key data: 55 t

Specifications Model No.: PM-55T Serial No.: 94713 Punching pressure max: 55 tons Punching capacity max.: Ø 22 x 18 mm Diameter x thickness: Ø 50 x 8 mm Engine power (kW): 3.7 Working height: 1050 mm Projection: 310 mm Table size (LxW): 700 x 500 mm Weight: 1620 kg Year of manufacture: 9/1999 Country of origin:Taiwan

WTT 180° degree roller cam 640-600 IR500 RA1803 Technical data: Framework width (NB): 640 mm Roll width (EL): 600 mm Roller pitch: 5:6 Rolls: 50mm, galvanized pitch (Tlg): 105 mm Conveying angle: 180° degrees Inner radius (IR): 500mm Overall height (BH): 80mm top edge of rollers Side guide outside: 185mm Drive: without Supports: without Construction: frame painted gray, rollers galvanized Optionally available: Supports: 70,00 Euro plus VAT / piece All prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 640 Roll width in mm: 600 (Nutzbreite) angle: 180° Driven: NO scope of delivery: without supports For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning ...

Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)

Weibert FR3 Sliding table saw milling machine NEW MACHINE Motor: 400V 4kW 2 motors Format sliding table: 2300mm Cutting height: 103mm Swivel saw blade, max. 315mm Milling machine rigid 90° Milling machine 1500/3500/6000/8000 rpm complete with boom WJ-400100

Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 350 mm -Drive: kW -Speed: 900/1700 rpm -Dimensions: 900/520/H1280 mm -Weight: 150 kg

- Capacity: 10 – 17 to/h - Height-adjustable feet: 500 – 1050 mm - Very little use of the machine - In very good condition

cross-section width:: Schläuche max. 11 mm cross-section heigth:: 11 mm feed:: 0,5 - 100.000 mm Condition: used, very good condition Specification: universal cutting machine with roller drive for hoses - small cutting machine for hoses - feed unit: roller drive - microcontroller control: 80537 - cutting unit: pneumatic - Type of cut: Blade cut - Industrial blade: for PVC hoses - Max. hose diameter: 11 mm - Maintenance unit: yes - Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length - Cutting force approx.: 500 N at 6 bar - Cutting length: 0.5 - 100,000 mm - Resolution/step change: 0.5 mm - Operating voltage: 230V, 50-60 Hz - Compressed air: 5 - 6 bar - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar - Paint finish: RAL 7035 light grey - No docum ...

Gear motor, electric motor -Speed: 50 rpm -Power: 2.2 kW -Design: B5 -Diameter shaft: 40 mm -Flange diameter: 250 mm -Diameter recess: 180 mm -Protection class: -No nameplate -Quantity: 1x motors available -Dimensions: 700/280/H300 mm -Weight: 63kg

Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 172 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 80 kg

Immediately available used centrifugal lubricating oil fitter

Year: 2017 - technically efficient, ready to work - after full service - processing of 2 profiles - support table

Gear motor, electric motor -Speed: 204 rpm -Power: 4.0 kW -Construction: B3 -Diameter shaft: Ø 60 mm -Protection class: IP 33 -Dimensions: -Weight: 113 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 150 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 50 mm -Protection class: IP 33 -Dimensions: 660/260/H300 mm -Weight: 74 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 51 rpm -Power: 0.25 kW -Design: B14 angle -Shaft diameter: 25 mm -Protection class: IP 44 -Dimensions: 580/250/H200 mm -Weight: 35 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Dimensions: 450/230/H180 mm -Weight: 18 kg

Four-sided planer Weinig Unimat 23 EL Working width 230mm Working height 160mm Head Arrangement: Bottom 5.5kw 4kw rights Left 5.5kw 4kw rights Mountain 11kw Bottom 5.5kw Mount 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Driven rollers in the table Pneumatic clamps CE Certified Year of Build 2003 Net price

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 20/63 rpm -Power: 0.5/0.9 kW -Construction: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 44 -Dimensions: 680/195/H320 mm -Weight: 53 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 146 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 45 mm -Protection class: IP 33 -Dimensions: 630/260/H300 mm -Weight: 75 kg

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...

CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts  ...

Wartsila 8R32 Crankshaft Standard sized Measurement reports available Without cracks or weldings

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 154 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 50 mm -Number: 1x motors available -Price: per piece -Dimensions: 590/250/H310 mm -Weight: 57 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 122 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 50 mm -Number: 3x motors available -Price: per piece -Dimensions: 590/250/H310 mm -Weight: 63 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 256 rpm -Power: 0.55kW -Construction: B3 -Diameter shaft: 25 mm - Degree of protection: IP 33 -Number: 1x available -Dimensions: 405/200/H210 mm -Weight: 22kg

Key data: 3645

Wartsila 9R32LN generator 1 unit available Year:2005 60 Hz 3645 Kw at 720 RPM