129,249 used machines on RESALE, but how to find them? Machine Search
End mill, end mill, cutter, shell cutter -Manufacturer: Fette, end mill with longitudinal groove, 2 pieces -Type: Fette 75 x 75H Sp 880 HSS -Hole: Ø 27 mm -Cutting material: HSS -Price/Fee: complete -Transport dimensions: 155/75/H75 mm -Weight: 3.3 kg
turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,009 m³/min Measurement (WxHxD): 2125 x 1700 x 920 Weight: 483 kg Compressed air connection: 1 1/4
Key data: 800 kN, 45 mm
KRAUSS MAFFEI KM 80-750 CX Stock No.: 503569 Manufacturer: KRAUSS MAFFEI Type: KM 80-750 CX Control: MC6 Year of Make: 2012 Operating hours: 34000 h Technical data closing page Clamping force: 800 kN Wooden dimensions h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Max. installation height: 500 mm Plate spacing max.: 750 mm Opening travel: 500 mm Ejector stroke: 150 mm Ejector force: 23 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 1000 kg Technical Data Spray Side Screw diameter: 45 mm Displacement: 318 cc Spray pressure: 2336 bar Screw length: 22 l/d Screw speed: 355 min Outdoor injection flow: 143 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 4.5m x 1.5m x 2m Total Weight: 3900KG Equipment Screen text German Core pull hydraulic 1x M ...
Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainles ...
Lippert belt conveyor GF 9600-750-600 RA2375 Technical data: Conveyor length (NL): 9600 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 9600 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sic ...
For sale: Powerful Doosan vertical machining center type Mynx 7500/40, equipped with the well-known control system of the Fanuc i-series including Fanuc Manual Guide i dialog area. This model, with a net weight of 13,500 kilograms, has an X, Y and Z axis displacement of 1,525 x 762 x 625 mm each. The table size is 1,600 x 750 mm. The machine is fully equipped with block guides. The pivot shot is an ISO 40 shot. The machine has a so-called arm changer with 32 positions and is also equipped with cooling through the spindle. As an extra, the machine is equipped with an integrated fourth Nikken axle with counter center. The machine also has a right-hand discharge chip conveyor. On request, you can purchase additional tool holders for the machine. The machine is in excellent condition and for more information please send an email to chrismachinematch.nl
Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: RAL5015 sky blue Stand Type: PNFB 12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Drf2Qd Footplates The stands are pre-assembled (screwed truss) Frame height: 1,750 mm Frame depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Macintyre 750Kg Chocolate kettle 2012, 750Kgs capacity chocolate kettle, hot water jacket with electric heating system, top mounted motor 1.5Kw with agitator, side bottom discharge, with wall mounted control panel, 3Ph
Fristam FP 752/250 VB - High-pressure centrifugal pump - 45m3 at 12 bar - 30 kW - Double schaft seal - Serial numbers: 0482550073 + 0482550074 - Excellent condition 2 pumps available
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 180 mm material thickness max. - throughfeed grindin: 30 mm grinding width max. - plunge cut grinding: 300 mm material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1 drive power: 48 kW GRINDING SPINDLE 2 drive power: 48 kW COMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 20 mm/min feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 5000 mm total height: 3100 mm total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment syst ...
power capacity:2x 5,5 kW feed pressure:16 bar liter capacity:2 x 585 l /min Receiver capacity:750 l total power requirement:380 V,50 Hz,11,2A, 2x5,5 kW weight of the machine ca.:940 kg dimensions of the machine ca.:3000 x 900 x 1650 mm
Control Heidenhain TNC 620 V2 Travel X/Y/Z 760/480/480 mm Speed 12000 rpm. Tool magazine for 24 tools SK40 Table size 900x410 mm Conveyor
Article: three-phase current motor Manufacturer: Antriebstechnik Bauknecht Type: RFV 22/4-75P e.g. to use as spindle motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Manufacturer: Tesa SA Vermessungtisch, Type: Messfeld 560 X 750 X 410 MM<CRLF>, FREETEXT1: Rechner und Steuerung sind vorhanden, FREETEXT2: Anlage wird vor <CRLF>Verkauf auf Funtion geprüft,
Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,
Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1889 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports, End stop included Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...
Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy
Description PANASONIC - SERVOMOTOR WITH ABLE REDUCER - NIDEC SHIMPO Model: MSMA082A1E +VRKF-15D-750-S Ratio: 1:15
Process Vessels Manufacturer: Schwarte-Milfor Capacity 750 l Cylindrical process vessel standing on feet, hermetically welded insulation, Double jacket, WGR MR 125 magnetic agitator on the bottom, agitator flange on the underbody (drive missing) Product space: vacuum and pressure resistant -1/3 bar, operating temperature -10/150 °C Interior polished, double jacket: Pressure-resistant up to 3 bar, operating temperature 150 °C the measurements are: Total height approx. 2,300 cm Diameter approx. 1,050 cm cylindrical height approx. 1,300 cm Feet 300 cm high Double jacket inlet and outlet DN 25 Last Assignment Pharmacy very good condition
Damas Sigma 753 Grain cleaner. Total refurbished with new bearings. New brushes Sandblasted and painted. Comes with pulco, aspirator and valve
Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002
A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible.
Saw blade length: 4330mm-4450mm, dimensions X/Y/Z: approx. 850mm/520mm/1800mm. An on-site inspection is possible.
Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible.
Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible.
grinding length: 750 mm grinding width: 500 mm workpiece height: 500 mm total power requirement: 50 kW weight of the machine ca.: 5000 t Grinding length, max. 750 mm Grinding width, max. 500 mm Cross movement of grinding slide 450 mm Working height under grinding wheel, max. 500 mm Grinding wheel size Æ 400 x 100 mm Grinding wheel speeds, infinitely variable 300-3,000 rpm Table speed, hydr. 0 - 30 m/min Table speed, creep feed 0.02 - 1,000 mm/min Vertical infeed, infinitely variable 0.002 - 0.03 mm/stroke Grinding spindle drive, max. 32 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight approx. 5,000 kg Accessories / Special Features Creep feed: Electro-mechanical feed (but also hydraulic table movement), with digital display, programable by cam limit switches. Infinit ...
max. grinding diameter: 0 mm grinding length: 0 mm workpiece length: 970 mm total power requirement: 12 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Pemat pan mixer for concrete is available. Volume: 750l, max. filling weight: 1200kg, hardened concrete output per batch: 500l, grain size range: 0-65mm, mixing trough diameter: 1900mm, mixing trough height: 700mm, drive power: 30kW, weight: approx. 3000kg. On-site inspection is possible.
table length: 780 mm table width: 500 mm ampere: - A Control: Heidenhain 121 total power requirement: - kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2 x 2 x 2 m No. 1564 Die-sinking EDM machine HANSEN 750 S max. workpiece weight 100 kg Working area: 500 x 300 x 375 Control: Heidenhain TNC-121 Eropuls NC-2000 Table 780 x 500 mm Space requirement approx. 2 x 1.5 m Weight approx. 3.7 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 762 mm y-travel: 508 mm z-travel: 508 mm B-axis (table): +120/-35 Grad c-axis: 360 Grad control: HAAS für 5 Achsen tool piece magazine with: 40 Plätzen number of spindle speeds: 12000 U/min dimensions of the machine ca.: 4.3 x 2.35 x 2.8 m weight of the machine ca.: 8.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Manufacture: TRAK SM3 CNC Number of axles: 3 St. table-size: 1270x320 mm x-travel: 750 mm y-travel: 400 mm z-travel: 610 mm milling head -swivable +/-: 45/90 ° spindle taper ISO: 40 spindle turning speed - stepless: 70-4400 U/min throat max.: 480 mm voltage: 400 V dimensions of the machine ca.: 1.8x1.7x2.4 m weight of the machine ca.: 2.5 t coolant: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BILLION série GM 750T/H6860 Année : 2004 Nombre d’heures de fonctionnement : 55 000 heures Force de serrage : 750 T - 7500 KN Groupe d'injection : H6860 Diamètre vis : 105 mm Distance entre colonnes : 1100 x 1100 mm Dimensions des plateaux : 1570 x 1570 mm Epaisseur mini/maxi du moule : 450-1200 mm Course d'ouverture : 1200 mm Volume injectable : 4546 cm3 Pression matière : 1510 bars Dimensions : 11,3 x 2,7 x 2,9 m
MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...
Transnorm conveyor belt GF 16950-900-750 RA2213 Technical data: Conveyor length (NL): 16950 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 750 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 16950 Nominal / outside width in mm: 900 Belt width in mm: 750 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor sp ...
A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible.
TRIA GRANULATOR 100-65DN, (machine offered totally reconditioned - photos taken before reconditioning), Open rotor length 1.000 mm., Ø 650 mm., n.3 rotating knives, n.2 still knives, 75 kw.drive, Electric cabinet, Constructed in 1996, offered FULLY RECONDITIONED, INSTALLED POWER: 75 kw, rotor size: 1000x650 open
green coffee silo PROBAT 20 cells of 750 kg each, with conveyor, scale, dust extractor, for sale Green coffee silo PROBAT 20 cells each 750 kg, with conveyor, scales, dust extraction for sale Location: Germany, Ruhr area, near Oberhausen
Heftköpfe für Sammelhefter - Stitching heads for Saddle Stitcher Polygraph Heftköpfe 731 - 745 - 750 Serial-No. 731-745-750
TPG Hypoid Gearmotor FV35-750-30 0.75kw, Ratio: 30, Shaft: 35mm
Key data: 75 mm, 2000 mm
Demonstration article Condition: slight signs of wear BSM 75x2000 Two-stage belt sander with contact wheel diameter 196 mm and large surface grinding surface 75x530 mm. With automatic tension regulator for constant sanding belt tension. Specifications: Sanding belt width 75 mm Surface grinding surface 75x530 mm Sanding belt length 2000 mm Grinding speed 1: 14.5 / 2: 29 m/s Contact wheel diameter 196 mm Drive motor power 3000 W Mains connection 400/50 V/Hz Length 700 mm Width 490 mm Height 1130 mm Weight 72 kg Swivel range >90° Extraction diameter 100 mm Subject to prior sale
Used packing machine made by Hugart, type: DS 7500. Capacity: 7500 pcs / h. New 2010. Fi 95 mm.
Material clamp, material gripper, load clampCarrying clamp, lifting clamp, block pliersManufacturer: NORDGREIF Type 7548Year of construction: 1997Load capacity: 500 kgGripping width: 280 to 420 mm- Width adjustment via trapezoidal thread with hand crank- Protective rubber coating on the gripping surfaces- For crane operation- with CE markingWeight: 50 kgGood condition; used
For sale are 141 new safety valves BOGE Id.Nr.: 564020204 Pressure 11.0 bar / with single certificate Connectors: G 1"-M Material: brass, oil-grease-free Gasket: NBR Temperature: -10+100°C Nominal diameter DN 18 CE ISO4126 approval Medium: O2 Oxygen - oil + grease-free Sale possible in packages of 50 pieces or more Sale without warranty
5-Axis Vertical Machining Center DMG DMC 75V LINEAR Linear Motors The machine can be viewed in working order in our warehouse in Gussago, Brescia. Mimu Machine Tools Gussago BS Italy Dmg DMC 75 Linear Heidenhain CNC iTNC 530 Tool holder HSK 63 Spindle power 35 kW Spindle speed 18,000 rpm Number of tools 60 X-axis travel 885 mm Y-axis travel 600 mm Z-axis travel 600 mm Rapid feeds X-Y-Z linear axes 90 m/min Roller guides Fourth-axis head yes Fourth-axis head type continuous Fourth-axis head degrees -10° + 110° Rotary table yes Rotary table type continuous Table size 750 mm MACHINE EQUIPMENT Precision package with optical scales on the axes New spindle line The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single setup on Multiple surfaces of the same workpiece. It is generally equipped with multiple m ...
For sale are 137 new safety valves BOGE Id.Nr.: 564020202 Pressure 11.0 bar / single certificate Connectors: G 1/2"-M Material: Brass Gasket: NBR Temperature: -10+100°C Sale possible in packages of 50 pieces or more Sale without warranty
maximum number of results exceeded
please refine your search
