w 75 used for sale

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 256 rpm -Power: 0.55kW -Construction: B3 -Diameter shaft: 25 mm - Degree of protection: IP 33 -Number: 1x available -Dimensions: 405/200/H210 mm -Weight: 22kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 165 mm -swiveling -Dimensions: 600/500/H300 mm -Weight: 84 kg

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 143 rpm -Power: 1.5 kW -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Dimensions: 620/320/H300 mm -Weight: 52 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 0.8/1.6 rpm -Power: 0.12/0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 45 mm -Protection class: IP 55 -Dimensions: 670/300/H320 mm -Weight: 69 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: tropicalized -Dimensions: 650/320/H300 mm -Weight: 64 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 28 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 605/345/H330 mm -Weight: 65 kg

Heavy duty castors, heavy duty wheel, tire, wheel, swivel castor, -Payload: 1,000 kg -directable -Brake -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 6x bikes available -Price: per piece -Weight: 10 kg/piece

Deck oven Wachtel Piccolo I-5 DMS 3 Master EM 100 glass - 5 floors each 80x60 - each floor with separate control - Top and bottom heat can be controlled separately - each floor with a separate steam box - Floor entrance height: 14cm - with proofing cabinet - with exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 12 / 2014 - Electrical connected load: 23.7 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

Heavy duty castors, heavy duty wheels, tires -Payload: 1,000 kg -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 9x wheels available -Price: per piece -Weight: 7 kg/piece

dimension of workpiece: 200 mm workpiece weight max.: 100 kg voltage: 230 V longitudinal feed: 150 mm vertical movement: 100 mm tool taper: bis 60 mm im Prisma Condition: new / unused: The machine can be viewed under current.: WMTR video measuring device T 210 Granite base plate 500 x 600 x 50 mm Digital size 0,001 mm resolution Longitudinal axis 150 mm Vertical axis 100 mm Tool holder in prism up to 80 mm diameter Swivel bracket 210 ° swiveling image comparison export of dates to EXCEL frequently measuring of video pictures labeling and marking of pictures saving and printing of pictures free calculation of variables detailed user administration superposition of DXF-drawings a lot of special software-modules Video measuring system IPM complete with: Software complete data acquisition create measurement protocols Consisting of: - Calculator, monitor, mouse, keyboard - ...

Electrode pliers with air connection for, electrode device, electrode welding device, joint planer, electrode pliers -for: carbon arc process -Cable length: 2.5 m -Dinse connector -Air connection -Number: 2x cables available -Price: per piece -Weight: 4 kg

More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

refrigeration system with a fan Year of construction :1990 Power : 1,1kW Voltage : 220/380 V 50Hz Amperage : 6.6 /5.8 V For further information, please refer to the type plate

Weibert W7-32 5-fold combi woodworking machine New machine (immediately available) Planer width: 320mm Cutting length 1700mm Milling stop for tool max. D=180mm 3 motors 3kW Digital display milling machine Price: kpl. 5874,-€ excl. VAT 6990,-€ incl. VAT

Refrigeration system with a fan Year of manufacture : 1993 Power : 3,2/2,0 kW Voltage : 380 V 50Hz Amperage : 6.4 / 3.7A Capacity : 41,5 dm³

PLC transfer element, terminal, series terminal, through terminal -Manufacturer: Weidmuller -Type: E-694.0/84 -Dimensions: 105/185/H75 mm -Weight: 0.51 kg

Machine type: Kieserling seven-roll straightening machine Working range: Tubes from Ø 15 mm to Ø 75 mm Rods Ø 20 mm to Ø 65 mm Direction of passage: from right to left Speed: approx. 50 m/min Make Kieserling & Albrecht Type: WRUN 1A Location: Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Power: 1.5kw -Number: 2x elements available -Price per piece -Dimensions heater: 65/65/H230 mm -Weight: 0.53kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 98 rpm -Power: 0.75 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 440/260/H160 mm -Weight: 18 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 405/250/H170 mm -Weight: 14.5 kg/piece

Wartsila 8L32 Oil Pump 1Piece available in our stock in Turkey Model: 1v18L36 Original in good condition

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 650 watts -Max. Drill: 6 mm -Connection: 230 volts -Weight: 2 kg

Wartsila 6L46 crankshaft available from stock standard sized Without any cracks or welding Measurement report available

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

ORDER NO. 7032 TECHNICAL SPECIFICATIONS - loading hopper inlet 1050x610mm - outlet for shredded wood fi 160mm - rotor working width 580mm - main engine 18,5kW - pump motor 0,75kW - number of knives 14pcs - knife size 30x30mm - sieve 15mm x 20mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 47900 PLN Net price: 10764 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

Rotary unit, rotary device, turning table, conveyor belt, container rotary device, welding rotary device, welding device -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring -Device is: pneumatically tiltable -Dimensions: 2520/800/H380 mm -Weight: 524 kg

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS

Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

Flow meter, pressure meter, flow meter -Pressure clocks: 2 -Water column: 1 -Dimensions: 400/300/H1000 mm -Weight: 5.2 kg

Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200

Complete Waukesha CHP power plant Including: Generator set Heat recovery Silincer Exhaust pipe Pumps Pipes Oil system Gas line Sound proof housing Air in and outlet The complete installation is in good condition and directly available. GAS POWER HOLLAND 00316 38 63 90 71

Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.

Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 13 kg

Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Total depth: 1,000 mm (support rod direction) Total width: 1,230 mm (crossbar direction) Support rod dimensions: 45/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 45 mm Mesh size: 60 x 40 mm Weight: approx. 18.11 kg | Pcs. Internal designation: S Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R

Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg

Control for cleaning system -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg

Pressure regulating directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 5350210030 -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Hardness tester Wolpert Testor HT 2001 Year of manufacture 1979 Hardness testing Rockwell Brinell Vickers Weight 185 kg Data Adjustment tool Unchecked!