w 75 used for sale

Bag width up to 20 cm, Bag length up to 32 cm, machine in production

Machine in running, tail end printer could be added

Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.

Max. useful capacity [dm3] 170 Max. batch weight [kg] 500 Blast room inside dimensions [mm] : Ø700 x 988 Max. workpiece diagonal [mm] : 350 Max. weight per workpiece [kg] : 23 Number of blast wheels : 1 Power per blast wheel [kW] : 11 Abrasive throughput, max. [kg/min] : 180 Initial abrasive filling [kg] : 180 Air required for dust collection [m3/h] : 1 600 Installed power, approx. [kW] : 12,3 Dimensions, approx. [mm] A : 3 730 x B: 2 070 x C : 1 610 Weight, approx. [kg] : 2 300 Max. carrying capacity of loader [kg] : 500 Power of loader [kW] : 7,5 Weight of loader [kg] : 1 250

2 pcs used REINTJES gearbox type WAV 1400 once left/left and one-off left/right Undertone 2,040/1

Control board for Werner & Pfleiderer Rototherm Stikkenofen Type: RZK 128

Batch container 1.500L, heatable, incl. anchor agitator

CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!

Automatic optimization crosscut saw: Technical data: Follow later!

Stock# UG6311 Second hand line for production caramel candies, mono flavour. Line can produce fruit taste candies, mint candies or milk (fat based). Reporting output up to 468 kg/h. Line consist of: - Caramel mass preparation section - includes caramel cooker TC&C Process designers 24" Schlagenkocher, manufactured by Snelders, new 1997. Working output up to 1000 kg/h. - Winkler & Dunnebier forming line type 163.04, new 1997. Reported output up to 486 kg/h. Forming section has dimensions: 920 mm x 280 mm x 40 mm. Forming dies in motion - 118 pcs. Number of candies per one mold: 240 pcs. Machine works with speed up to 6.5 molds per minute. Working dimensions: L 11.85 m x W 1.9 m x H 2.83 m. Final product discharged at height 850-950 mm. Power consumption 40 kW

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

Weipert start hole drilling machine Flexibility and economic Producing micro-bores TECHNICAL DATA: Electrodes: 0.50-3mm Travel X-axis: 250mm Travel Y-axis: 350mm Travel Z-axis (Z1& Z2) 600mm Travel W-axis 300mm Feed X,Y,Z-axis 200mm/min Spindle speed 20-120rpm Aspect ratio 300:1 Table dimensions 436x316mm max. working current 30 A Table electrode 360mm Dielectrium container 25L Power 3.5kW Weight 600 Kg