w 75 used for sale

length: 1700 mm width: 600 mm height over floor: 860 mm table load capacity: 400 Kg dimensions: 1700 x 600 x 400 m weight: 70 kg Workbench with 6 drawers and solid wood worktop Door compartment dimensions (W x D x H) 940 x 400 x 440 mm Small drawer dimensions (W x D x H) 460 x 400 x 120 mm Height adjustment: max. 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Materials: PP // Film Width (Max): 1600 mm

Output Capacity: 3000 kg/h // Material : PET

Pero Washing Machine 2600/016GR.2W-4667

PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLES STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, capacity: ca.500 kg/h depending on material and contamination

1 MURATA rest cone winder type 7R-2, automatic cone winder for residual yarns, 5 spindles, year 1990, magazine feed with 12 cans, diameter of supply yarn 75 to 110 mm, individual knotters, exit cones traverse 6"=150 mm, conicity 4º20', winder can make cones up to a weight of 4 Kg, winding speed 1000 m/min

number: 10 Positionen weight: 30 kg condition: neu : 28 mm 5 screw clamps Thrust length 155 mm Length 300 mm Condition: new Hole diameter 28 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) The scope of delivery includes: OSB boards, second choice Overall length: 2,440 mm Total width: 590 mm Thickness: 18 mm Panel size in m²: approx. 1.44 m² Total m² / package: approx. 144 m² Design: tongue and groove Number of pieces in the package: 100 pieces Base price m²: 7,56 € Hints: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) The scope of delivery includes: OSB boards, second choice Overall length: 2,500 mm Total width: 625 mm Thickness: 22 mm Panel size in m²: approx. 1.56 m² Total m² / package: approx. 50 m² Design: tongue and groove Number of units in the package: 32 pieces Base price m²: 9,24 € Hint: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Manufacturer: Prozap Model: EK0 Laser welding station Year of Manufacture: 2023 Power supply: TN-S Voltage: 400 V, 50 Hz Current: 100 A Power: 36 kW Pneumatic pressure: 4.5 bar Weight: 3200 kg Certifications: ISO 9001, CE Find more here - / Contact us at -

Godwin HL80M high-pressure pump, , This dry self-priming high-pressure diesel engine pump is ready to tackle all the heavy work without complaining. With its robust 75 kW Deutz diesel engine (at 2200 rpm), it delivers impressive performance: a maximum capacity of 95 m³/hour and a delivery head of up to 85 meters. Whether its pressure testing pipes, irrigation, or a rinsing job after a fun weekend in the mud, this HL80M can handle it all., , Key specs:, , Type: HL80M, Drive: Deutz diesel engine, Fuel tank: 250 liters (you can keep pumping for a while before it gets thirsty), Consumption: ± 20 liters/hour at full load, Pressure connection: 4 flange, Suction connection: 4 V-piece quick coupling, Weight: 1,800 kg (solid, because quality weighs something), Dimensions: 2150 x 1130 x 2060 mm, Pump housing: cast iron – extremely strong, Impeller: cast steel – for when things get serious, M ...

Caffini libellula This Caffini water pump with 400 V electric motor is often used in construction industry, municipalities, civil engineering. The Caffini libellula diaphragm pumps have always been highly appreciated by their users in the construction and public works sector. The ability to run dry allows the operator to keep the ditch dry, even when it contains mud and suspended solids., Max yield : 20 m³/h, Max head : 16 mWK, , Available with any connection you require, , Throughput capacity: 20 m3/h, Max. head: 16 MWK, Weight: 100 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 100 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = D ...

Horn wrapping machine Erka WMB 30 for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Combi wrapping machine for skeins/pretzel skeins Machine mobile Connection 400V, 16A-CEE plug Machine Option: Maintenance contract Service Package Delivery Instruction & Commissioning

REF-2720 ULMA ATLANTA FLOW WRAPPER WITH PHOTOELECTRIC EYE AND DOUBLE SEALING JAW Manufacturer: ULMA Model: ATLANTA Year: 1998 Horizontal flow pack wrapper (HFFS) equipped with photoelectric eye. Double film reel and double sealing jaw. Voltage: 380 V / 50 Hz / 16 A / 3Ph Total power: 3,5 kW Output: up to 250 p/min (depending on film and product) Pneumatic consumption: 50 litres/min; 6 bar Sealing jaw dimensions: 200 x 50 mm (WxH) Overall dimensions: 7,000 x 1,300 x 1,650 mm (LxWxH) Weight: approx. 910 kg

Description: Single-chamber car wash Type: ROBOMAT 2 Factory number: 7441 Condition: mint condition, no visible defects, rarely used Buyer must dismantle and transport parts washing machine in the workshop area himself.

The system is sold in cleaned and tested condition. Availability: immediately Weighing range: from 0.6 to 2.45 kg Operating instructions: available Weight: approx. 650 kg Machine dimensions: approx. 160 x 65 x 140 cm Hopper dimensions: approx. 110 x 110 x 65

Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move.  With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges.  🔧 100% original Doka XP parts  📦 Ready for immediate delivery †incl. reusable packaging  💶 Full package for just €5,399.†(net)  This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to.    Expand now †before you hit the limit.  The accessories are ready †you just have to grab them. 😉  👉 Ask. Decide. Go.  Price: from € 5399,00 ...

Used RINGER Master formwork , galvanized, well-maintained, and ready to use †incl. 3.30  m hinged corner! Only while supplies last. 🟠 👉 Don’t miss out: just €4,999 for the complete set! 🔹 Durable steel panels with plastic facing †clean, long-lasting, ready-to-use 🔹 System compatible †perfect for existing RINGER inventories 🔹 Sustainable & cost-efficient †smart building with second-hand gear ♻ Pre-owned formwork is trending †and just as powerful on-site. Think sustainable, build economically †with used wall formwork that delivers. 📦 It’s that easy: add your package to the inquiry cart †receive your custom quote in no time. 💸 Once paid, we deliver straight to your site or prepare for pick-up. 💡 Buying used formwork? Now it’s easy  ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 3.30 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨 ⚙ 🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 652,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 102 x Fr ...

Go higher, spend smarter †Doka Alu Framax 2.70 m in the ⭐⭐ Star Package!   This package includes Doka Alu Framax formwork panels with a height of 2.70 m †ideal for large-scale applications where fewer panels cover more surface, saving you valuable time on the construction site.💪   The lightweight aluminum frame system can be used with or without a crane . Thanks to its low weight, it’s easy to handle manually †without compromising on performance. With a load capacity of 60 kN/m , it delivers reliable stability for every project.   The panels are ⭐⭐ Star-classified †meaning: cleaned, used , and suitable for medium to lower-demand applications . A smart choice for anyone looking to balance functionality and cost .   🔩🛠📦 Now’s the time to upgrade your site equipment  ...

📏 Compact & clever †the MANTO 1.20 m and 0.60 m!   Need formwork for lower wall heights or looking to add flexibility to your setup? Then the  Hünnebeck MANTO at 1.20 m and 0.60 m height is just what you need! 🔧 The MANTO 1.20 m and 0.60 m is part of the trusted Hünnebeck wall formwork system †robust, durable, and highly versatile . With hot-dip galvanized steel frames , it’s made to handle tough site conditions and daily use. 💡   💼 Especially practical for details: The 1.20 m and 0.60 m panels are easy to handle , quick to install, and ideal for small surfaces , foundations , or as a smart add-on where flexibility is key. And of course, they can be used horizontally or vertically , and combined as needed. 🔁   And just like always: 📦 Accessories? Absolutely! Our warehous ...

A recirculating rack oven WP is available. Tray dimensions X/Y: 600mm/800mm, max. rack trolley diagonal: 1070mm, max. rack trolley height: 1800mm, baking area: 10m², max. tray load: 350kg. Machine dimensions X/Y/Z: approx. 1550mm/1650mm/2550mm, weight: approx. 2000kg, controls: Navigo 3. Documentation available. An on-site inspection is possible.

Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...

TBVE (TVE-ESCALE) ESCALE – Three Bath Open Width Washer Model: High Efficiency Washing Range (Washing Range – ESCALE) Manufacturer: TVE-ESCALE (TBVE Group) Year of manufacture: 2023 Condition: Good, fully operational Configuration: 3-bath open width washer with 3 evacuation (vacuum) slots – one per scour bath Documentation: Manual available Status: Available for sale Three heated wash bays, counter flow, working width of 2800mm fabric specs of 100gsm – 400 gsm (can be used on heavier cloth successfully) all plc controlled with three evac slots (one on each wash bay) input from roll or plated, output plated. --------------------------------------------------------------- Machine Description The TVE-ESCALE High Efficiency Washing Range is an industrial open-width textile washer designed for high-quality washing, scouring, and bleaching of fabrics. The system combines bath ...

Wire gauge range: 1.5 - 7.0 mm Section lengths: max. 1,000 mm Feed speed: 29 - 90 mtr./min

Load capacity: max. 1,500 kg. Wire gauge range; 0.5 - 6.0 mm Coil diameter: max. 1,000 mm Speed: 0 - 80 rpm,

Load capacity: max. 1,500 kg. Wire thickness range: 0.5 - 9.0 mm Waistband-outer diameter. max. 1,000 mm Waistband-inner diameter. min. 300 mm Speed: 0 - 80 rpm

Wire gauge range: 1.5 - 7.0 mm Section lengths: up to 8,000 mm Feed speed:

Manufacturer: Trockenkammer Lauber /Mühlböck Wood Drying System Year of Manufacture: 2012 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS = 0.3 bar - Flow ...

Dataweigh ADW-410SV – Precision Multihead Weigher for Efficient Packaging Lines, The Dataweigh ADW-410SV is a high-performance multihead weighing system engineered for fast, accurate and reliable weighing of products in food, snack, confectionery, pet food and industrial applications. Built for continuous production environments, this machine combines robust design with easy operation to optimize throughput and minimize waste., Key Features & Benefits, - High throughput: Designed with 10 weighing heads for efficient combination weighing and rapid fill cycles — ideal for mid-range production speeds., - Consistent accuracy: Achieve reliable portion control and minimized giveaway on each batch. Scribd, - Hygienic construction: Built to meet hygiene standards required in food processing environments. Yamato Scale, - Operator friendly: Intuitive controls make setup and changeovers fast an ...

WACO + KUJAKON resaw line BKW, WACO twin resaw, type BKW-S, Feed speed up to 120 m/min, KUJAKON automation with de-stacking, infeed and stacking

The machine is ideal for short lengths (30, 50 or 100m) either in full width, or you can also divide into different widths, from a maximum of 1600 mm. Thanks to the 4 take-up shafts, the machinist is able to unload and position a new sleeve while the machine is still winding. This brings an enormous amount of extra power at the end of the day, as there are only short downtimes. The machine is still in daily use and sample materials can be tested daily. We would then disassemble the machine, pack it and put it on a stable pallet. 20ft containers can be loaded via the ramp.

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.

Features Volume 60200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7700 mm Height 5330 mm Diameter width 3500 mm Weight 3500 kg Surface inside 2B=IIIC ground Surface on the outside semi-marbled Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 to DN 40 Sprinkler ring Vent nozzle DN 50 (airlock) Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 350x450 mm Sample tap DN 15 Ladder hook at the top Dip Shank Sleeve DN 15 for Temperature Display Downward-swept CIP cable with vent cable DN 40, with connection thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn curved surround with angled seat valve DN 50 - outlet pipe DN 100 reduced to DN 50 with flange  ...

1 x Used Wrapping Machine WM FC780 E, age 2005, Unwinder:, Single Reel holder, Max. reel diameter 1,200 mm, Thermoforming machine:, Max. tool size 780 x 570 mm, Max. tool size with pneumatic clamp frame 750 x 570 mm, Max. positive depth 130 mm, Max. negative depth 130 mm, Max. sheet width 810 mm, Max. sheet indexing 570 mm, Max. HIPS sheet thickness 1.8 mm, Max. EPS sheet thickness 3 mm, Max. platen stroke (upper – lower) 150 mm, Heater length 1,775 mm, Clamping force DaN 20,000, Upper heating, installed power Kw 41, Lower heating, installed power Kw 41, Vacuum pump motor Kw 2,2, Platen driving servo motor (each) Kw 7.5, Sheet index servomotor Kw 11, Dry cycle speed 45 Cycles/ min, Processing air pressure 7 bar, Water consumption at + 12° C. 60 L/ min, Air consumption at 7 bar 50 L/ cycle, Cutting Press:, Max. cut dimensions 760 x 550 mm, Platen clamping force DaN 60,000, Upper platen ...

This Waterjet Italy WL510 was manufactured in 2022. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Ideal for industries requiring detailed and accurate cutting work. Contact us for more information.

This H.G. Ridder Waricut HWE 3020 2 2 D Retrofit was manufactured in 2023. It features two cutting heads, each capable of a maximum travel of 2,450 mm. Key specifications include a travel range of 2,050 mm (X) and 3,050 mm (Y), with a Z-axis travel of 200 mm. It boasts a maximum linear speed of 20 m/min and an installed drive power of 45 kW. Contact us for more information about this waterjet cutting machine.

This 3-axis STM WS3040 waterjet cutting machine was manufactured in 2019. It features a large effective cutting area of 3000 x 4000 mm, dual Z-axis CNC for enhanced precision, and is equipped with advanced NUM FLEXIUM plus 3D 5-axis control. Additional highlights include LED work area lighting, a high-pressure Servotron pump, and comprehensive safety technology. If you are looking to get high-quality cutting capabilities, consider the STM WS3040 machine we have for sale. Contact us for more information.

This WEINIG Unimat 23 E was manufactured in 1999, designed for efficient wood planing. Ideal for woodworking professionals looking to enhance their production capabilities. Contact us for more information.

This 5-axis WEINIG U23 wood moulder was manufactured in 1991. Ideal for detailed woodworking, it offers precision and efficiency. Consider the opportunity to buy this WEINIG U23 wood moulder. Contact us for more information about this machine.

number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special 31-piece set, 28mm system, consisting of: 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm 2x Professional pipe clamps, 180° 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION! Tools are designed for 25mm thick tabletops. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Wood Band Saw was manufactured in 2020. It features a maximum log diameter of 1100 mm and a cutting length up to 10 meters. The main drive is robust at 15 kW, ensuring efficient operation. It includes a double edger, wood excavator, and various operational enhancements such as an electrically adjustable saw head and multiple feed speeds. Ideal for comprehensive woodworking tasks. Contact us for more information about this machine.

This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine.

This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine.

This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine.

This WIKOMA LL001 was manufactured in 2021. It is a painting system designed for lacquering narrow edge surfaces of furniture panels. The setup includes two spraying booths, two hot air drying tunnels, a sanding booth, chain conveyors, and a control panel. It was operational until June 2025. Consider the opportunity to buy this WIKOMA LL001 painting system. Contact us for more information about this machine.

This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.

passage width: mm working heigth: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ECKERT Opal WaterJet CNC waterjet cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for precision machining of a wide range of materials, i.e. metal, stone, wood and plastics. Workpieces with a maximum thickness of 150 mm are machined by means of a reliable cutting head with anti-collision and tool height sensor. During cutting, only water is used, making the process free of harmful fumes and safe for the environment. The ECKERT Opal WaterJet is distinguished by its robust water table with a double WEMA grating system. The design made of closed steel profiles ensures high stability during even the most intensive challenges. All travel components, in turn, are protected by bellows covers. This solution guarantees uninterrupted operation of the machine for many years of use. The ECKERT WaterJet is operated via a state-of-the-art industrial co ...