w 35 used for sale

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

Hello all we have 10 pcs Caterpillar 3512B gen sets available with control panels 1200 Kw - 50 Hz Year of build is 2008 aprox working hours: 12000-15000 Location: Far east Please contact info@fin-marine for information

; Gross weight [kg]: 3700; Engine: Volvo TAD1343GE; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 576

As good as new hand groove device / creasing device, working width 355mm

Key data: 1600 mm, 3500 mm, 800 mm

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...

Tray Sealer A 350 in use until shutdown 2

Circular saw Manufacturer: MEP Type: Tiger 350

; Gross weight [kg]: 3621; Engine: Cummins 6CTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 640

Key data: 1000 , 166 , 40

Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

clamping force: 350 kN injection volume: 59 cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power ...

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

The scope of delivery includes: 01x Shelf connector, used Mounting type: on the side of the shelf stand Surface: sendz. galvanized Total length: 450 mm for shelf spacing: approx. 350 mm Profile abm.: U 62 x 30 mm Weight: 0,84 kg | Pcs.

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Refer to code 1020 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

1,000kW 60Hz 61HR CAT 3508 Generator Set This CAT 3508 generator set was decommissioned in Feb 2023 and has been currently being stored. This generator set has been used as an emergency standby generator for a government office building in Korea. Since the operation time is very short at 61 hours and maintenance has been excellent, it is currently in the best condition and can be operated immediately. Main specifications: - Engine Model: CAT 3508 x 1 Set - Maker: CATERPILLER - Application: STANDBY - Output: 1,000kW x 1,800 rpm - Frequency & Voltage: 60Hz & 380V - Year of Production: 2004 - Running Hours: 61hrs - Fuel Oil: Diesel Oil

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories

Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165

Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC13-71A(02-01) - Stage 3A Engine No.: 7395788 Power: 315 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: ECO 38.2 L 4 C Gene. No.: P242434 Generator power: 350 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 740 Dimensions of the power unit: Width approx. mm: 1.800 Height approx. mm: 2.340 ...

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

cutting diameter: 355 mm dimensions of saw-band: 3770 x 34 x 1,1 mm cutting speed: 20 - 80 m/min cutting width: 490 x 280 mm : 290 mm Impact energy: 250 mm : 230 mm : 180 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions: 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Riveting machine (1 head) Make Hang Model 84 HS 350 Year 1992 Distance till frame 300 mm Rivet transport Automatic rivet transport

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 620-1040 mm adjustable -Roll width: 355 mm -Dimensions: 480/480/H620 mm -Weight: 16 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg

Converter, converter, converter, drive converter, controller, inverter -SEW: Movitron Type 355 825074X -Input: E 380-415 V 50 (60) Hz -Output: G 0 ... 460 V 55 A -Temperature: 0-45 °C -Protection class: IP00 -Dimensions: 335/220/H175 mm -Weight: 7.2 kg

• Description: Versatile punch with many inserts • Power: max. pressure: 35t • Working height: approx. 1000 mm • Dimensions: 1350 x 850 x 1724 mm • Weight: 1540 kg • In operation since: 06.1998 • Accessories: Trolley with many suitable tools

Powder dispersing plant (powder mixer) Manafacturer: Frystam Shear Pump: Type: FSPE 3532 D No.: 0574460006 Power: 11-22 kW Centrifugal pump: Type: FZ 20 A Power: 7.5-11 kW complete system on a mobile frame with integrated hopper(diameter: 690 mm); Capacity: approx. 65 l with inlet and outlet with sight glass with control cabinet in EEx protection Condition as good as new, rarely in operation LWH: 1350 x 900 x 1050 mm Weight: approx. 350 kg

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 60 mm -Piston rod: Ø 35 mm -Flange: Ø 69 mm -Recording thread: Ø 22 x 2 x 30 mm -Stroke: 900 mm -Dimensions: 1090 x 100 x 100 mm -Weight: 17 kg

Face plate, face plate chuck, four-jaw chuck -Transfer in current condition as seen -Jaws and threaded rods: missing -Chuck size: Ø 355 mm -Weight: 15 kg

PLC control, supply unit, converter, power module, U/E module, digital power amplifier -Manufacturer: Hydraulik Ring, digital power amplifier -Type: VRD 350 -Voltage: 24 V -Dimensions: 220/80/H130 mm -Weight: 0.8 kg

Guide track, guides, tool slide, cross table, cross slide, bed guide track, machine bed -Guide track: from Meuselwitz lathe -Measures: see drawing in the photos -Dimensions: 780/355 / H390 mm -Weight: 135 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Bosch, pneumatic cylinder type 0 822 351 008 -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm / M12x1.25 -Dimensions: 445/75 / H70 mm -Weight: 1.9 kg

ROTOR FOR 6 BLADES FOR FILLING MACHINE RISCO : RS 4000 ,RS 4001, RS 4003 - used Risco Article number : 35900016 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 infointer-wiba.com.pl abc.inter-wiba.com.pl

Repair service Reparatur Service Part: Axle amplifier type MDS-A-V2-3510 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-A-V2-3520 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-A-V2-3535 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: max. 1335 mm, adjustable -Roll: Ø 25 x 350 mm -Dimensions: 550/520/H970 mm -Weight: 13 kg

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-3510 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-3520 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.