127,861 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003
Manufacturer: Rippert, Type: N-355 B, Year: 1995, Diameter intake mm: 355, Engine power kW: 3, Flow rate approx. m3/h: 3000-6000, rotations rpm: 1415, Direkt drive: yes, Pressing: 1080, Wight approx. kg: 200, Required space L x W x H mm: 1000 x1000, Year :1995
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle diametre on front bearing120 mmSpindle noseA2-6 Spindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Speed max.6000 rpmNumber of driven tools12 Power max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (40% DC)14 kWDrive power (100% DC)12,6 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmGeneral2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Esmena Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,135 mm Number of fields per row of shelves: 05 pcs Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 18 pcs. Number of pallet spaces per row: 90 pcs. Total number of pallet spaces: 90 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Heigh ...
Key data: 280 KW, 350 kVA, 400 V
The Electroquell 350 kVA (280 kW) is a powerful and reliable generator with a Ricardo engine designed for industrial plants, hospitals and large office buildings. Ricardo engine ComAp or DSE control Brushless Generator Drip pan Soundproof housing Engine heating Power: 350 kVA / 280 kW Voltage: 400 V approx. 505 A Weight: approx. 3000 kg Options: ATS, Remote Monitoring, Advanced Fuel Tanks Warranty: up to 60 months
CATERPILLAR 3516B YEAR 2004 HOURS ORIGINAL 40,000 PANELS CONTROL GAS LINE SILENCER ..
CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor
Make: Caterpillar Model: 3508 Mfg year: 2011 Run time: 322 Hours only Containerized. Power: 925 KVA Voltage: 440 V Speed: 1800 RPM Frequency: 60 Hz In excellent condition #caterpillar #generator #power #energy #ship #vessel #marine #diesel
FAS roller conveyors 9000-410-350 RA2404 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3x3000 mm = 9000 mm Roller width (RB): 350 mm Nominal/outer width (NB): 410 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 9000 Nominal / outside width in mm: 410 Roll width in mm: 350 Roll division in mm: 62,5, 130 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with t ...
Tool diameter: mm sanding disc diameter: mm Motor output: 5 kW total power requirement: kw Weight: 1.500 kg Overall size: mm Control: cnc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3500 kN
Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fa ...
Mazak QTN 350M x 1200 Motorized Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: FUSION 640 T NEXUS Main spindle nose: ASA 8 Main spindle power: 22Kw Main spindle bar passage: 76mm Turning diameter: 420mm Turning length: 1173mm Number of main spindle speeds: 3300 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm First turret Z-axis travel: 1240mm Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3450mm Width: 2050mm Height: 2000mm Weight: 7500Kg
Vacuum tumbler 350 liters Lutetia Capacity: 150kg Volume: 350 liters Dimensions: 1450 x 880 x 1430mm Weight: 200kg Capacity: 350 liters Voltage: 400V / 50Hz / 3NPE
Key data: 2250 KW, 2812 kVA
This genset was purchased for a project, but never used. Manufactured 10/2022 - It is in new condition. Genset 2022 CATERPILLAR 2250KW 3516C GENSET ASCO 4000 AMP Automatic Transfer Switch Genset Drop Over Enclosure Containment Solutions Gen Cube 3500 Gallon Fuel Tank SCR Support Equipment and Controls Container Submittals. Factory Tests Reports, O&M Manuals, Owners Manuals
METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...
Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T
engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1.300 – 1.800 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sheeter for foil / sleeve Manufacturer: Sandmann Working range width = 16 -350 mm, Length = 10 -1000 mm, Speed up to 50 m/min
Max power 350 hp 3800 rpm Max torque 700 Nm Number of cylinder 6
A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible.
Three identical Gullco electrode ovens are available for drying and stabilizing welding electrodes. Internal dimensions X/Y/Z: approx. 350mm/400mm/480mm, max. electrode length: 450mm, max. temperature: 550°C, power consumption: 1.5kW, machine dimensions X/Y/Z: approx. 560mm/560mm/620mm, weight: approx. 160kg. Documentation available. On-site inspection is possible.
Jasa 350 vertical bagging machine, The Jasa 350FV is a versatile, capable and reliable vertical packaging machine, Robust design, ideal for medium to large production volumes., Specifications, - Maximum Speed: 35 to 40 packages per minute, depending on the product and film settings., - Wrapping Film: Suitable for various types of films, such as PP, with the option for both barrier films and regular films., - Dimensions: The machine has a compact design, but the exact dimensions may vary depending on the specific configuration., - Cutting Mechanism: Automatic cutting mechanisms for precise sealing of the packages., - Settings: Digital settings for speed, temperature, and product configurations., - Temperature Control: To ensure optimal sealing, the temperature of the film machine is automatically regulated, providing reliable packaging., - Packaging Size: Various formats supplied from sto ...
A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible.
length: 3500 mm width: 1000 mm depth: 1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting ...
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,22 t dimensions: 0,7 x 0,9 x 1,9 m ATTENTION: SPECIAL PRICE! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with ...
saw blade diameter: 350 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 100 x 195 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 100 x 135 mm saw blade turning speeds: 2800 U/min total power requirement: 1,5 kW weight of the machine ca.: 250 kg dimensions: 0,7 x 0,7 x 1,4 m ATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 3500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V/280AH Li-ion weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,94 x 1,23 x 2,25 m New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 945 x 605 x 605 mm operating pressure: 2,2 - 5,5 bar dimensions: 1,0 x 0,61 x 1,65 m : 1300 x 1000 x 750 cm Air consumption: 250 l/min. weight of the machine ca.: 0,09 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic include : - PC - Screen : upgrde to 22 - Backlight : upgrade to vertica ...
A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats ...
maximum number of results exceeded
please refine your search
