w 200 used for sale

This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.

This WOLF KGW 160 was manufactured in 2001. It is an extraction system designed to handle large air volumes, with a supply air capacity of 10,000 m3/h and exhaust air at 9,500 m3/h. Powered by an 11 kW motor, it efficiently manages air flow and pressure. Consider the opportunity to buy this WOLF KGW 160 extraction system. Contact us for more information about this machine.

Used Used Shrink Wrapper 2004 10 ppm: Year: 2004 Condition: Good Used Shrink Wrapper 2004 600 ppm: Model: CD2 Year: 2004 Speed: 10 PPM 2 lane Bundle 2?3 Function: semi-automatic Version: sealing bar Safety protections Code: F 81 More details: https://bottlingscout.com

Used Used Pallet Wrapper Tosa 2008: Year: 2008 Condition: Good Used Pallet Wrapper Tosa 2008: Model: 065 Year: 2008 Speed: 20 pallet/h Maximum workable pallet height: 2300 mm (including pallet) Pallet dimensions: 800 mm x 1200 mm ; 1000 mm x 1200 mm Type of winding: rotary table Pre-stretch Measurements-overall dimensions of machinery: 2500 mm x 1500 mm Safety protections Code: A 58 More details: https://bottlingscout.com

Key data: 1350 mm, 3 , 120 mm

Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis WEINIG / DIMTER Unirex 2000 SPB was manufactured in 2007. It features a total power of 45 kW and operates at a nominal current of 110 A. The machine is part of a comprehensive wood production line, including a drilling and milling center, tenon cutting machine, and longitudinal profiling machine. If you are looking to get high-quality wood processing capabilities, consider the WEINIG / DIMTER Unirex 2000 SPB machine we have for sale. Contact us for further details.

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

Punching and forming center in chain with an assembly line for the production of relays, see pictures

Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 2000 A Suction capacity: 2065 m ³/h Engine: 5.5 KW Cat. No.: PP W61 000 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

; Gross weight [kg]: 5847; Engine: Perkins 4016TAG1A; Accessories: Control Panel, Including: Coolant heater and battery charger

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

table length: 2000 mm table width: 1000 mm table height: 850 - 900 mm weight of the machine ca.: 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 800 kg height adjustment: 650 - 950 mm weight of the machine ca.: 0,045 t dimensions: 2,07 x 0,48 x 0,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 670x770x1203 mm Weight: 142 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!

Tetra Pak A1 Wedge 200ml Filling Line For Sale Item #: Usm-171 Category Tetra Pak A1 Tetra Pak A1 1000 for Tetra Wedge 200ml Filling Line Nominal line capacity (per hour) 11300 packages/h Package type Tetra Wedge Aseptic Package volume 200 ml Opening/Closure Straw Tetra Pak Straw Applicator 30 0400 TWA 1 Cooling system: Cooling system Photocell unit: Photocell unit Dating unit: With dating unit InkJet Paper trolley: With paper trolley Remote connection: With Remote connection Manual. Oil Pump f. Refill. Cabinet Jumbo Reel Truck 080S 0403; Battery operated stacker with traddle outriggers and electrical powered turning Online PLMS Stabilizer 35kVA

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Transport frame wheels defective, see picture -Motor: 2.8 kW -Vibrating bottle: length 360 mm -Hose length: 5 m -Dimensions: 1150/520/H690 mm -Weight: 116 kg

Max diam 250 , max lenght 2000, 3 x heads , change gears

Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 2.8 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H720 mm -Weight: 74 kg

automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal area 800mm Rising range 2,000mm Angle in the bend 45° Feed height: 300mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edges, blue FDA- Food compliant, food certificate is included Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Freely steerable transport rollers incl. parking brake Scalloped edge: 50x35mm T-40 cleats - approx. 300mm pitch 2-layer particularly transversely stable Usable width: 290mm, results as follows: Cross arrangement 70+35+290+35+70mm All our prices are net prices plus VAT. - can also be viewed under power after consultation!

table length: 4000 mm table width: 2000 mm : 28 mm table height: 815 mm : kg weight of the machine ca.: 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -

grinding length:600 mm grinding width:200 mm total power requirement:5 kW weight of the machine ca.:1,4 t dimensions of the machine ca.:3 x 3 m

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

: 32 mm direkt : 1:1,25 angle adjustable from - to: -20/ +20 Grad weight: 17,0 kg dimensions: 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 mm direkt : 1:1,25 angle adjustable from - to: -20/ +20 Grad weight: 17,0 kg dimensions: 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - two driven toolholders straight 2-020-W10-1001 - Angle-adjustable threaded swivel head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm weight of the machine ca.: 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional Accessories shown are optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 73 kg length in width: 620 mm length in total: 2400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 55 kg length in width: 620 mm length in total: 2000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 2000 mm Tube length: 2280 mm numbers of toolholders: 3 : Rohr galvanisch Verzinkt dimensions: 2,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available.

Double Z mixer with discharge screw Type : UK 2000 AEL Manufacturer : Werner & Pfleiderer Volume : 2000 ltr. Material : Areas in contact with the product in stainless steel

roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monoblock laboratory rolling mill 200 x 400 mm - new - Roller diameter: 200 mm - Roll length: 400 mm - Roll bore: peripherally drilled - Individual drives: variable friction ratio - Roller bearings: roller bearings with manual grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 20 mm, during normal operation operation - Speed range approx.: 2.5 - 19.5 rpm - New hydraulic unit for roller gap and emergency system emergency system - New Johnson-Fluiten rotary joints - two adjustable guide plates Tecafine PE5 Natural to reduce the working range. - Working range approx.: 100 to 360  ...

MAX DIAM 250 X 2000

An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.

ram capacity: 2000 t return capacity: 150 t table-size: 1015 x 1050 mm ram head dimension: 975 x 1050 mm dist. between pillars (left to right): 975 mm dayligth: 1000 mm distance table/ram: 600 - 1000 mm ram stroke: 400 mm table height over floor: 800 mm height over floor: 3650 mm Table ejector: 63 KN Ram ejector: 650 KN Table ejector stroke: 100 mm Ram ejector stroke: 100 mm Lenght of ram slide guiding: 1400 mm : Idle speed downward: 235 mm/s working feed: max. 20 mm/sec Working speed at 10000 KN: 14 mm/s Working speed at 20000 KN: 5 mm/s Idle speed upward: 250 mm/s overtravel time: 220 ms safety distance: 352 mm total power requirement: 194 kW weight of the machine ca.: 105 t dimensions of the machine ca.: ca. 5,00 x 6,50 x 8,00 m Technical data without engagement: sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector ...

Key data: 6000 mm, 2200 mm, 2000 mm

CNC Guideway Grinding Machine Waldrich Coburg Way Grind 2000AC Year of construction 2013 Siemens 840D controller Table width 2,000 mm Grinding width 2,200 mm Distance between stand covers 2,200 mm Grinding height 2,000 mm Grinding length 6,000 mm Table longitudinal travel 6,825 mm Table load 8,000 kg/m Total table load max. 20,000 kg Max. grinding height: Universal grinding head 2,000 mm Circumferential grinding head 1,925 mm Table speed 1.1 - 1.2 m/min. - max. 10-14 m/min. Positioning accuracy +/- 1 mm Circumferential grinding head: Max. drive power 50 kW Spindle speeds 500 - 1100 rpm Grinding wheel dimensions: Diameter (max.) 600 mm Width 150 mm Inner diameter 150 mm Universal grinding head Drive power (max). 22 kW Spindle speeds 500 - 2500 rpm. Grinding wheel dimensions: Diameter (max.) 600 mm Width 100 mm Inner diameter 250 mm Gri ...

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories

Beck Wand 1000/2000 Extraction Wall Extraction wall Type: Beck Wand 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet metal evenly distributed. For connection to a central extraction system via a suction nozzle at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom of the front of the wall. Uses: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: NW 250 top center Recommended extraction capacity: 3000 m3/h Paintwork: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: 2970,-€ More items - new and used - can be found in our shop! International shipping costs on request!