w 100 a used for sale

Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.2 m -water cooled -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Würth, workshop trolley, sturdy tool trolley -12 drawers: lockable, see photos for layout -Dimensions total: 680/460/H1045 mm -Weight: 70 kg

Shaft, axle shaft, spindle shaft, axle bolt -Shaft: axle shaft spindle shaft -Type: Shaft Ø 30/40/45 mm -Dimensions: see photos -Total dimensions: Ø 65 x 135 mm -Weight: 1.2 kg

table length: 1200 mm table width: 800 mm table height: 800-975 mm table load capacity: 250 Kg weight of the machine ca.: 150 Kg dimensions: 1,2 x 0,8 x 0,85 m Special price! Siegmund workbench Perforated plate made of high-quality steel S355J2+N + plasma nitriding - 16 mm bore - Surface holes in 50x50 mm grid - Material thickness approx. 12 mm - Height-adjustable feet for working height in the range of 800 to 975 mm - Frame made of aluminum profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Immediately available in the recon

axial fan, fan, extraction, fan wheel, fan blade, fan blades, blade fan impeller -Manufacturer: Multi Wing, wing fan impeller 4-blade fixed pitch -Diameter: 400 mm -Hole: Ø 19 x 40 mm -Quantity: 1x fan wheel available -Dimensions: Ø 400 x 75 mm -Weight: 0.7 kg

Immediately available new raw water pump

Water pump, new suitable for MAN D2842, cf. original MAN number: 51.06500.6470

WHEEL.GEAR.GEAR, OIL PUMPDRIBE

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Eltako, Wide-range switching power supply -Type: WNT12 -Quantity: 1x switching power supply included -Dimensions: 90/75/H60 mm -Weight: 0.2 kg

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

Wittmann temperature control unit

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

The Godwin Dri-Prime CD103M pump is an extremely powerful yet compact pump with a flow rate of up to 230m3 per hour litres. lift heights of up to 52 metres., The CD103M is equipped with the unique Godwin high-pressure oil, bath mechanical seal. This allows the pump, run dry for longer periods while it automatically, refill. The CD103M is capable of operating under the harshest conditions., CD103M handles solids up to 75 mm in diameter. This, This makes it a highly effective pump, suitable for both, slurry and clean water applications. The powerful CD103M, has proven itself as the pump of choice for contractors, local, governments, industrial and environmental companies., , Throughput capacity: 232 m3/h, Max dirt passage: 75 mm, Motor brand: PERKINS 404D-22T 36.4 KW @ 2500RPM, Max. head: 52 MWK, , = More information =, , Year of manufacture: 2017, Empty weight: 1.500 kg, Connector size: 4 ...

Complete with intelligent random in feed system. As new condition

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

Inv. Num. : 8067 Type: WWD30-10 Producer: ZT Italy Created: 2021 Parameters: Maximum Inlet Diameter: 3.3 mm Minimum Outlet Diameter: 0.55 mm Maximum output diameter: 1.05 mm

Prepared for CNC control Siemens 840 DSL Precision turntable make EIMELDINGEN with aerostatic axial bearings Specifications Table diameter 5,600 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 30,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 30,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001°

SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm

MEMMERT WNE 45 + SV2945 - 45 liters Model: Water bath / WNE45 - Stirring system: SV2945 Temperature range: approx. 5 °C above ambient temperature up to +95° C Setting temperature range +10 to +95 °C Display resolution: 0.1 °C Capacity: approx. 45 liters Internal dimensions (WxDxH): 590 x 350 x 220 mm External dimensions (WxDxH): 818 x 516 x 401 mm Network: 230 V / 50 ... 60 Hz / 2800 W Weight: approx.: 26.0 kg Minimum fill level: 177 mm Maximum fill level 200 mm Digital timer from 1 min. to 999 hours for: ON (continuous operation) WAIT (delayed start) HOLD or HOLD depending on the target temperature with "holding time guarantee" With Memmert SV2945 stirring device Stirring device incl. support frame, with electronic frequency control 35 – 160 cyls min (linear amplitude) Year of manufacture: 2018 and 2019

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

System Overview This is a purpose-built, containerised ISO tank and road tanker washing system, custom-designed and manufactured to a high specification. The complete system is housed in two standard 40ft ISO containers, making it fully mobile, easy to deploy, and ready for international shipment. The system comprises two independent but complementary units: ► Unit 1 — Tank Washing Unit: A fully equipped hot and cold pressure washing system for ISO tanks and road tankers ► Unit 2 — Wastewater Treatment Plant (WWTP): A physicochemical water treatment system for effluent compliance and water recycling ★ Capacity: 5–8 ISO tanks per day + 3–4 road tankers per day ★ Self-contained: all pumps, burners, controls housed within the containers ★ Water recycling: treated water returned to wash cycle — reduces fresh water consumption ★ Compliant: designed to meet Ha ...

Wood router, adjustable WMW VWF 35 - 01 ( 35-01 ) n 6000 rpm 220 x 50 x 35 left New ! Dimensions: 250 x 250 x 150 mm

Wood router WMW VWF 35 - 01 ( 35-01 ) n 6000 rpm 220 x 50 x 35 right New ! Dimensions: 250 x 250 x 150 mm

A Wolf checkweigher with an integrated weighing unit Wipotech IW 40K is available. Infeed conveyor length: 600mm, weighing conveyor length: 700mm, outfeed conveyor length: 600mm, belt width: 400mm, direction of travel: right-left, max. product weight: 17kg, graduation: 1g, max. weighing weight: 15kg, throughput: approx. 200 products/min. Machine dimensions X/Y/Z: approx. 1300mm/500mm/1300mm, weight: approx. 200kg. Documentation vorhanden. An on-site inspection is possible.

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

The machine (built 1999) comes with a table of 3 x 4m, can work with up to four cutting heads and is fully functional. The scope of supply includes an automatic sludge extraction system, sand storage tank incl. pressure vessel and an Ingersoll high-pressure pump. 2x head system. Can also run with 4x heads 1x pump included. has always been serviced. Is ready to use. Great working condition. Find more here - / Contact us at -

Ersa N-Wave 400 400V 50Hz Year of construction: 2005 Find more here - / Contact us at -

2016 HR(RUDHOLZER) Warmnietanlage Plastic welding machine Dedicated equipment for JQ specific process, machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

2004 WaterJet Watter Cutter Technical Condition: operational Manual: - Specifications: Cutting material: Water+abrasive Number of nozzles: 2 (programmable 1 nozzle) Water consumption: 3.6-7.2 l/min. Abbrasive consumption: 250-400 g/min. Water pressure: 4000 bar Sheet thickness: max. 100mm Sheet dimensions: 2000 x 6000 mm Space requirement: 4900 mm wide 7200 mm long 3500 mm high High speed 6000 mm/min Cutting speed: 5-3000 mm/min Drives: Servomotors Combined power: 37-75 kW. Programming circuit: E.C.S CNC-1801 Programmable on the machine tool and has a programming workstation. Programme: LogoTag 2003 and MagicTool Year of construction: 2004 Find more here - / Contact us at -

Technical Specifications: Model: W2000/NFB/2400/3", 6"/300 Total Power: 52 kW Voltage: 3x400V / 230V Current: 85 A Frequency: 50 Hz Fuse: 100 A Specifications - Rewinder Width: - Maximum Film Width: 2350 mm - Roller Width (Input): 2600 mm - Winding Cores: - Core Sizes: 6” / 3” - Performance: - Maximum Mechanical Speed: 250 m/min - Roll Specifications: - Maximum Roll Diameter: 980 mm - Film Thickness: 15 – 200 µm - Edge Trimming: - Type: In-Line - Knife Type: - Type: Razor blade - Additional Features: - Anti-stick Rollers: Linear guide and scale for the knife - Spreading Rollers: Partially driven - Winding Modes: - Modes: Gap / Contact - Tension Control: - Control Points: Multiple points driven/regulated before and within the rewinder - Dancer Roller: - Type: Pendulum-mounted, made of CFK (carbon fiber) - Satellite Roller: - Adjustability: Adjustable in the entry angle - Ro ...

Manufacturer: FANUC Type of Machine : Welding Robot Condition: Used Find more here - / Contact us at -

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

table diameter: 180 mm : 10 Kg : 5 Kg chucking diameter: 65 mm turning speeds: 2 - 20 stufenlos swivelling range: 90 Grad tilt adjustment: manually/mechanicall: manuell connected load frequency: 230 V weight of the machine ca.: 18 Kg dimensions of the machine ca.: 300 x 300 x 300 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Hergeth Warper Sample Year of Manufacture: 1996 Type of Machine: Warper Sample Minimum warper : 10 MTs. Maximum warper : 60 MTs Height : 2000 Find more here - / Contact us at -

various Rolling Tools for Jupiter Baking Machines - Condition: used - for different angles and Wafer Lengths

Bode welding crane

Manufacturer: Winkelübergabe AM 35, Year: ca. 2015, Control: yes, Conveyor belts Qty: 2, Conveyor belt 1 mm: 6000, Belt width 1 mm: 1300, Belt width 3 mm: 1450, Working hight adjustable mm: yes, Belt transfer: yes, Angular transfer: yes, Feeding speed max m/min: ca. 20, Feeding speed continous adjustable: yes, Dimensions L x W x H mm: 3000x4350x900, Year :ca. 2015

Manufacturer: Weber, Type: OFZ 1 - 1350, Year: 1993, Monting of the machine: Walze, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 1, Sanding belt dimensions: 2.620 x 1.350, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : no, Table hight adjustment by engine: yes, Rubber roller: 1, Band 1 Leistung kW : ca 18, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: ca 5 - 15, Transportbandantrieb kW: ca 3, Intermediate sanding of lacquer: no, Year :1993

Manufacturer: Wamhoff, Type: Luftkissentisch Rückführung, Year: ca.1998, Control: hand, Conveyor belts Qty: 4000, Belt width 1 mm: 880, Conveyor belt 2 mm: 2790, Belt width 2 mm: 860, Conveyor belt 3 mm: 4000, Belt width 3 mm: 600, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: 880-950, Luftkissentisch pneumatisch: yes, Angular transfer: yes, Drain roller operation: yes, Year :ca.1998

Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005

Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004

Manufacturer: Weeke, Type: BP 195 T, Year: 1996, Throuh running machine: yes, Working range X: 3200, Working range Y-axis: 1300, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, r.p.m: 18000, r.p.m: 18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Rollentisch: yes, Vacuum pumps m³/h: 120, Bohrer vertikal: 44, Auslegermaschine : yes, zwei getrennte Bohrgetriebe mit einzelnen Achsen Raster 32 mm, Year :1996

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Manufacturer: Laska Type: WINKIELWOLF type WW 200 2 Year of production 2015 Power:36 /38 kW Scale: 1600 kg Length x width x height: 2542 x 1453 x 1600 x with mast loading 2846 mm Power supply: 400 /50 Hz Hopper capacity: 350 L With mast loading, hydraulic type BA 24 for 200 L standard wagons Perforated disc diameter 200mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60