vr 6 used for sale

Multihead weigher with automatic packaging machine. The plant is in mint condition. Viewing: by arrangement Material: Stainless Steel Bag length: 450 - 800 mm Bag width: 150 - 300 mm Weight of packing machine: 800 kg Packing speed: 30 - 70 bags/min Control: Siemens Smart Line Electr. Total power: 2.2 kW Total weight: 1,300 kg Disassembly: by buyer or on request

The machine is in good technical condition and can be tested by prior arrangement. It is fully functional. It is equipped with a new tool magazine but comes without a workpiece probe, clamping fixtures, or tools.

CONTROLS   Point-to-point control (NC) HEIDENHAIN TNC 124 WORKING RANGE -CUBIC-   X-axis travel: 600 mm   Y-axis travel: 400 mm   Z-axis travel: 400 mm TABLE   table surface (left-right): 800 mm   table surface (front-back): 425 mm   workpiece load (max): 250 kg SPINDLE / HEAD   spindle revolutions (max): 4500 /min   tool fixture: ISO SK 40   drive power: 7.5 kW ELECTRICAL SPECIFICATIONS   mains power supply: 13 kVA DIMENSIONS / WEIGHTS   space requirements -left/right-: 2720 mm   space requirements -front/back-: 1850 mm   total height: 2300 mm   total weight approx.: 2025 kg ca 2000 h

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 kN

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Dimensions: Weight: 6500 kg Length/Width/Height: ...

Key data: 600 kN

Arburg 320C 600-250 / Machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Core train control Hardened injection unit - Bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical ...

Key data: 600 kN

Arburg 370S 600-70 Year of Make: 2008 Injection unit: Screw diameter: 25 mm Injection weight: 40 g Spray pressure: 1550 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Possibility of adjusting the vertical injection unit with the help of special brackets It is possible to change the screw diameter to 22, 25 or 30 mm Dimensions: Weight: 3160 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started by our service technicians before they are sold. It is pos ...

Key data: 1300 kN

Arburg 420C 1300-675 with the Star Sprue Picker Year of Make: 2002 Injection unit: Screw diameter: 50 mm Injection weight: 297 g Spray pressure: 2080 bar Dosing volume: 353 ccm Clamping unit: Clamping force: 130 t Spar spacing: 420x420 mm Size of the clamping plates: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 2 Hardened injection unit - Bimetal Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Covers from the operator's side open automatically Dimensions: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It i ...

Arburg 470C 1500-675 Year of Make: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Spray pressure: 1440 bar Dosing volume: 508 cc Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Core train control Hardened injection unit - Bimetal Parallel movements Dimensions: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum section for suctioning the material to be conveyed -Belt width: 250 mm -Conveyor length: 2460 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 2460/470/H300 mm -Weight: 152 kg

CONTROLS   CNC controls SIEMENS WORKING RANGE SURFACE GRINDING   grinding length: 600 mm   grinding width: 250 mm   vertical travel: 280 mm TABLE (SURFACE GRINDING)   magnetic table: yes SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 600 mm   spindle revolutions (min): 800 /min   spindle revolutions (max): 2400 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 300 mm DRESSING DEVICE   dressing tool: single diamond ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 2500 kg ATTACHMENTS (GRINDING)   coolant unit: yes

This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for sale.Contact us for more information.

5-axis machining center, year 2016, CNC Doosan-Fanuc i. Used machine. More info & price on IndustrialBuyer.

Presse à injecter BILLION bi matière 750 T Type : H780/6860 - 750 Vis de 45 mm Vis de 90 mm Equipée du dosage électrique et start and stop

Key data: 2500 kN

Arburg 630S 2500-1300 ECO / Production line with the Sepro Industrial Robot SDR 22S Year of Make: 2008 Injection unit: Screw diameter: 55 mm Injection weight: 521 g Spray pressure: 2380 bar Dosing volume: 570 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 15 Hardened injection unit - Bimetal Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) ECO – the machine has a system for adjusting the minimum tool height Robot - Sepro Industrial Robot SDR 22S Year of Make: 2016 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X- ...

For sale is a RUF 5.5/83700 with 60x40mm briquette size used for steel. Machine is in very good condition. Power requirement is 400V AC 11kW 32Amp. Control system is Siemen's S7-200

Syspal 600SCM Totebin lifter 2023, Stainless, tote bin lifter, lifts to 1100mm, SWL 350Kgs, mobile, 3Ph

cutting length: 5300mm; cutting height: 2100mm; cutting depht: 80mm; scoring unit: no; feed: manuell; read out horicontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; movable material support: ja; Sawblade speed: ca. 4000 U/min; motor power: 4 kW; machine length: 6500mm; machine depth: 1500mm; machine height: 2800 mm; weight: 800kg;

Handtmann vacuum stuffer -Type: VF 608 -Power: 3KW -Filling capacity: up to 2000kg/h -Portioning and twisting: up to 400 servings/minute - Portioning range: 5 to 100,000 g -Year of manufacture: 2009 -Twister included -Additional funnels included -Busch vacuum pump -With technical documentation -Power supply: 400V 50Hz 3Ph -Dimensions: 1200 x 1220 x 2040 mm -Net weight: 475kg -Condition: Used, very good, ready to work

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;

EMCO Hyperturn 665 MC PlusYear of manuf. : 2008 Control : Siemens 840D - Powerline Turning diam. : 430 mmTurning length : 744 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:5.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Röhm KZZT-AF 65/6Subspindle:Technology:MotorspindleSpeed:7.000 rpmPower (max.):22 kWTorque (max.):130 NmWorkpiececlamping:3-Jaw chuck, Röhm KFD-HE 210Ejector:PneumaticMovement in Z:750 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:4.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:270/100/750 mmEilgang in X/Y/Z:24/10/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:4.000 rpm, 6,7 kW, 25 NmMovement in X/Z:205/750 mmEilgang in X/Z:24/30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal coolant pumps with High- ...

sheet width: 6020 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm back stop - adjustable: max. 1000 mm work height max.: 1030 mm no. of strokes: 5 - 10 Hub/min cutting angle: 0.5 - 3.0 ° down holder: 33 Stück Control: SC 100 T engine output: 11.0 kW weight of the machine ca.: ca. 27000 kg range L-W-H: 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left Control unit with LCD display Pre-selected positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment Programmable retraction from the backgauge Programmable cutting length limitatio ...

Key data: 2700 KW

4 x Jenbacher 616 fo sale 11,000 Volts 50 HZ 30,000 Hours 2010 2700kW Here we present a 10 MW, 11,000 Volt power plant comprising 4 x Jenbacher 616 Generators. Generators can be seen running until the end of October and condition is generally good. Two units are on 30,000 hours and require a top end service. One unit is on 10,000 running hours and has an exchange block and does not require service. One unit is on 10,000 running hours and has had many cylinder heads used on other engines so needs replacement parts. Total price for this powerplant is €500,000. It is ready for immediate dismantle and loading . Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

1. Second-hand extrusion press line (Pos. 1-2) Mfc.: Yejing Force: 630 T Type: RH Press, Built: 2015 Billet: dia. 90 x 6000 mm Auxiliary: Built: 2021 Mfc.: Jiangshun Air Cooling Cooling bed: 32 m x 6.5 m

1. Second-hand extrusion press line (Pos. 1-2) Mfc.: Yejing Force: 630 T Type: RH Press, Built: 2015 Billet: dia. 90 x 6000 mm Auxiliary: Built: 2021 Mfc.: Jiangshun Air Cooling Cooling bed: 32 m x 6.5 m

2 aggregates available Engine type: MWM TBG 616V8K Year: 1997 and 2004 Power: 300 kW Stamford generators with 550 or 600 kVA 400/231 V, 50 HZ Operating hours approx. 59000 Subject to prior sale - errors possible! Internal reference number: E-1225-03

Engine type: MWM TBG 616 V12 K 525 kW 1500 1/min 50 Hz Stamford Generator with 910 kVA Subject to prior sale - errors possible! Internal reference number: E-1225-04

electric pile cutter with automatic pressing, 380V, back gauge adjustable by hand crank, measuring scale on the front table, optical cut indication, table model (without base)

Hydraulic motor Manufacturer: LöSi Hydraulik GmbH Model: EPMV 630 SH 3 General data: Swallowing volume [cm³/rev]: 629.1 Side connections 2x G1 inch BSPP Shaft: Serrated (16 teeth) Ø 53.98 mm 4-hole square flange (hole spacing: 200 mm) Technical data (for use in continuous operation): Max. speed: 320 rpm Max. torque: 1660 Nm Max. power output: 48 kW Max. oil flow: 200 l/min Max. inlet pressure: 210 bar Minimum speed: 6 rpm max. return pressure without leakage oil line or max. pressure in the leakage oil line = 60 bar The device is NEW and fully functional. see pictures for more details. Internal number: 603 141 603 143 603 144 603 145 603 158 257398523244 397695608456

Important note: the spindle was replaced in 2025 for approx. 40,000 EUR, therefore few spindle hours! The pallets are clamped on the rotary tilting table. Incl technical documentation and HSK-E 40 tool holders and three pallets. additional technical data: • rapid traverse: max. 30 m/min

With technical documentation as well as workbench and accessories such as HSK-E 40 tool holders, equipped with tools. Additional technical specifications: • Table T-slots quantity: 5 pcs • T-slots dimensions: 18H12 • Distance HSK holder - table: 550 mm • Feed drive X-, Y- and Z-axis: Traversing speed: 30 m/min • Dimensions of the workbench: approx. 1500 x 900 x 1100 mm

Dry Transformer Manufacturer: Schneider Type: DLPS 63E The device is NEW and fully functional. see pictures for more details.

Code: 0491 Brand: KUPER Model: FW MINI 630 - CE Standard Thread splicer for veneer,for joinery workshops, doors, furniture, veneer, custom-made furniture, panels and various items - CE Standard Technical data Arm mm 630 Veneer thickness mm 0,4 - 2 Feeding 7 mt/min Voltage 220 volts Overall dimensions: mm 850 x 370 x 400 h Weight kg 31

A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible.

For sale is a new, unused set consisting of a cab Hermes+ industrial printer and the matching cab Hub applicator in its original packaging. (Packaging opened for photo only) The system comes from a project resolution and is ideal for automated marking and labeling in production, logistics or packaging lines. 1. cab Hermes+ 4R/600-3 Label Printer (Print Module) Manufacturer: cab Produkttechnik GmbH & Co KG Model: Hermes+ 4R/600-3 Item number: 5955763 Resolution: High-end 600 dpi (ideal for very small texts, high-resolution 2D codes & barcodes) Version: R (Right-hand version) Print width: up to 4 inches (105.6 mm) Voltage: 100–240 V Condition: NEW in original packaging (orig. packaging) 2. cab Hub Applicator 4014R-300 (Stroke Applicator) Manufacturer: cab Produkttechnik GmbH Model No.: 4014R-300 Item number: 5966106 Version: Suitable for Hermes+  ...

Code: 0493 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: Electronic control POWER CONTROL PC 20+ PU top pressure rollers instead of rubber rollers Optimization of workpiece spacing Inlet ruler extension by 300mm with additional laminate overhang device JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A12 with automatic edge retraction – Quickmelt APPLICATION UNIT – Standard application unit replaceable PU glue – Pressure zone with motorized adjustment QA 45 EVA application unit for all types of adhesives and quick changeovers CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.35 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT CAPS PRE-MILLING UNIT 2 X 0.55 KW counter-rotation – with PNEU ...

Standard configuration ⦁ Stable C-frame ⦁ Coordinate guide with linear magazine with 19 tool stations ⦁ 2 clamps ⦁ Drives with maintenance free 3-phase servo motors ⦁ Programmable presser foot for repositioning ⦁ Repositioning device with programmable strippers ⦁ Sensor monitored part chutes 500 x 500 mm for Punching and Laser station ⦁ 2 good parts containers ⦁ Laser unit: TruFlow 2700 CO2 Laser radio-frequency excited, isolated against vibrations, integrated in machine frame, including cooling unit and Laser control TASC 3 ⦁ NitroLine: High-pressure cutting ⦁ SprintLine ⦁ ContourLine ⦁ Programmable cutting gas pressure ⦁ Laser cutting head with 5 lens ⦁ Laser cutting head with 7,5 lens ⦁ Laser cutting head - quick changing device ⦁ ControlLine ⦁ LensLine ⦁ Punching head: Mono tool adapter, 360° rotation of all tools, automatic tool lenght compe ...

Technical data of the pallet rack crossbar: Shelving system: Jungheinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 1007 daffodil yellow Box profile: 160 x 50 mm Truss Type: AUF ́B ́E0436|3.6 Agraffe: 4 HK (hooks) Clear width: 3,600 mm max. load per pair of trusses 4,000 kg, with equal. distributed load. 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for pickup. A beyond desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Baader 601 is continuous-feed soft separator designed to separate meat, poultry Throughput / Capacity Approx. 600 – 1,000 kg/h Motor Power 3.0 kW Electrical Supply 400 V / 3 Phase / 50 Hz Drum Hole Size 5 mm Machine Weight (Net) Approx. 420kg Dimensions (L × W × H) Approx. 1,150 × 900 × 1,350 mm Infeed System Top manual feed tray

BAZ DMG Lasertec 65s BJ 2014

Width 66 cm Built in 1999 Pallet feeder with suction head Tremat Sheet Separation System 1st station: 6 fold pockets 66 cm Upstream knife shaft Downstream knife shaft Gluing device HHS for cold glue 2nd station: 6 fold pockets Downstream knife shaft 3rd station: 4 fold pockets Downstream knife shaft Standing sheet delivery SBP 46 Delivery date: Immediately

Key data: 650 , 152 , 35

Presse à injecter BILLION Proxima 65 T type 650-H310 Année : 2005 Commande : DIXIT 2 Groupe d'injection : H310 Force de verrouillage : 65 T Diamètre vis : 35 mm Rapport L/D : 20 Volume injectable : 168 cm3 Pression d’injection : 2025 bars Distance entre colonnes : 500 x 460 mm Dimension des plateaux : 660 x 600 mm Distance maximum entre les plateaux : 730 mm Course d’ouverture maximum : 330 mm Epaisseur moule min/max : 200/400 mm Dimensions : 4,17 m x 1,43 m x 1,85 m Poids : 5,9 T

Closes sausages and mortadella with a clip on both ends, The Serrano MH-640 is an automatic double clipping machine, originally designed for mortadella and other large sausage calibres. The filled casing is voided and clipped on two sides in one stroke, so one sausage is closed and the next already has its start., The machine sits on a stainless cabinet with castors, with an outfeed chute and roller conveyor for the product. It is pneumatically driven. We did not find a rating plate with the year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/serrano-mh-640-automatic-double-clipper /, Type: Automatic double clipper, Application: Mortadella and large sausage calibres, Drive: Pneumatic, Outfeed: Chute and roller conveyor, Construction: Stainless cabinet on castors

Technical data for the frame profile: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Frame profile, used Material colour: sendzimir galvanised Frame profile: 140 x 80 x 2.25 mm Frame height: 9,650 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Offer 26265 Technical data: - Flat steel shears cut up to 240 x 13 mm - Profile steel shears - Cuts L-steel at 90° to 100 x 10 mm - at 45° to 70 x 8 mm - Steel bar shears - Cuts round steel up to 35 mm - Square steel up to 32 mm - Notching device with square notching device - Hole punch - punching force 600 KN - projection 220 mm - Punches in steel up to 30 mm Ø in 15 mm - Punches in steel up to 24 mm Ø in 20 mm - various punches + dies - E. – Footswitch - Drive 400 V / 4 kW - Space requirement approx. W 540 x H 1800 x D 920 mm - Weight approx. 1200 kg

Key data: 635 mm, 510 mm, 460 mm

Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Engine No.: 1537000170A Year of Make: 2009 Control: Siemens 810D Shopmill Axles: 3 Travels X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 places SK 40 Speed: 20-8,000 rpm Drive power: 13/9 kW (40/100%ED) - Direct displacement measurement system X,Y,Z - Sealing air for measuring systems - Coolant blowing air switching - Table size 560x790 mm - Electronic handwheel Errors and prior sale excepted.

This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, new Material colour: RAL 2004 orange Box profile: 100 x 50 x 1.5mm Truss Type: PNB 0480 Weight/piece: 14.25 kg Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 1,000 kg at the same distributed load 02x Safety pins, new Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: These are new goods with traces of storage in the form of of dust deposits or the like. One-time special price, due to customer cancellation, subject to sales. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. An additional transport requ ...

Heller H 6000Year of manuf. : 2024 Control : Siemens Sinumerik ONE Movement X/Y/Z : 1000/1000/1000 mmTool holder : HSK-A100 ____________Description:Spindle:Technology:Gearbox SpindleSpeed:8.000 rpmPower (max.):60 kWTorque (max.):1.146 NmTaper:HSK-A100NC-Roundtable:B-Axis:0,001°Palletsize:630 x 630 mmIn general:Toolmagazine:425 stationsRapid travers in X/Y/Z:50 m/minEquipment/Accessory:Positionsensor:Direct Scales in all AxesChipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbelt-filter and high-pressure, 70barWorkpiecemeasurement:Touchprobe, Renishaw RMP60Toolbreakagecontrol:TaktilSoftwareoption:Process-integrated tool monitoringAutomation I:Palletchanger, 2 stationsAutomation II:Interface FASTEMS MLSOilmistseparation:Interface mechanical preparedFurther Accessory:Rinsing pistol