vr 6 used for sale

EKU C9F-6GS 6 Burner Natural Gas Stove Hob (gas burner) Number of burners: 6 stand-alone gas burners. Burner configuration: Divided into two performance classes for flexible pot sizes: 3 x small/medium-sized burners: 3.5 kW each (burner head Ø approx. 80 mm) 3 x large power burners: 6.0 kW each (burner head Ø approx. 110/120 mm) Total power hob: 28.5 kW gas output. Equipment: Cast-iron pot supports (slide shelf) and thermoelectric ignition fuse on each flame for maximum operational safety. Oven (undercounter)Type: Gas-powered large-capacity oven (statically heated) with piezoelectric ignition. Oven power: approx. 8.0 kW to 9.0 kW burner power. Inner dimensions: Suitable for Gastronorm grates and trays (GN 2/1). Temperature range: Adjustable from 100 °C to 300 °C via a safety gas thermostat. Connected loads Total connected load (gas): approx. 36.5 kW to 37.5 kW (sum  ...

Used Van Dam 620-8 UV High Speed 600 Cups/ min, 8-Color Cup Printing Line, Age 2000:, Auto Elevator Tray Feeder, Auto-cross feeder conveyor, Standard Van Dam Goose Neck infeed to main print unit, Universal Screw Denester, Mandrel Spin System, SOFTAL Corona Pretreater with Leak tester, Main 8-Color Print unit. Modern New Style Print Heads, Each Print head consisting of : 8 x precision ground rollers, 2 x Oscillating Rollers water cooled, Gear driven Fountain Rollers, Ink Well with Ink Agitators, All eight heads swing open for easy plate mounting and free roller accessibility, All pressure and color register adjustment can be made while printer is running, Easy access to product handling areas and print area, No cup no print system, Double cup detection, Main Inverter Drive. Speed continuously variable., UV-On Mandrel Curing System: UVITERNO MONO-JUMBO-8015., Dual Timing Belt Take-Off, Exa ...

Case rounding machine, Unknown, Model 600, Year 2000´s, Working size 600 mm, Available Direct, Working size: 600 mm

Laminating machine / Film to sheet, Make GBC, Model 620 OS, Year 2008, Maximum width 520 mm, Paper stock 120 - 350 grams, Details manual feed on a belt, automatic seperation of the sheets by cut&tear, Production output 15 meters per minute, Details Pneumatic pressure, this machine is also known as GMP Protopic 520, Available direct, Maximum width: 520mm, Paper stock: 120 - 350 grams, Production output: 15 meters per minute

General SKU226Y115 MakePerinox Serial05.107.41.1 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume600 Ltr. Surface2.4 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface6x 0,4 m² Drying chamber capacity600 l. Drying chamber sizes500 x 1120 x 680 mm Max. temperature-20°C/+150°C Number of trays6 Tray sizes400 x 1000 mm Distance between the trays100 mm With 1 doorcheck With vacuum pumpcheck Motor5,5 kW, 380 V., 1420 rpm MaterialStainless steel 1.4301 (304) General TypeVTS Year of construction1993 revision 2005 Mounted on framecheck LocationBarneveld With switchgear(as is) Floorspace1,30 x 1,40 m Total height2,10 m Weight1450 kg CEcheck Extra information Extra SpecificationsWith steam heating condenser,  Regloplas temperature control unit, type P140,  Siem ...

KUNZE-GÄRKAMMER – 1 WAGEN – 400 V – 5.6 kW – Baujahr 1999 Zum Verkauf steht eine gebrauchte KUNZE-Gärkammer für die kontrollierte Gärung und das Aufgehen von Teig. Technische Daten des Geräts: Hersteller: KUNZE Type: 6034-EN 1 Baujahr: 1999 Stromversorgung: 400 V Leistung: 5.6 kW Item number: 51276 Ausführung: Edelstahl Temperature- und Feuchtigkeitsregelung Für den Einsatz in Bäckereien/Konditoreien vorgesehen Die Gärkammer ermöglicht die Aufrechterhaltung geeigneter Temperatur- und Feuchtigkeitsbedingungen während des Teigvergärungsprozesses. Zustand: gebraucht, sichtbare Gebrauchsspuren.

Main characteristics : • Overall dimensions: LxWxH: 2200mm. x 650mm. x 1950mm.; • Designed for shaping sausages in the drying process; • Mobile performance: movement through 6 polyamide wheels; • The pressure on the product is exerted by pneumatic cylinders located at the top of the machine; • Determination of the pressure on the product is carried out by adjusting the pressure of the compressed air supplied to the cylinders; • Compressed air connection: 1/2" (quick connection with spiral hose);

Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany

General SKU226Y113 MakeStrassBurger Filter GmbH Serial012006726213 TypeW-MFP 630/1 E-E Dimensions Cake capacity71 Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure10 Bar Surface4.35 m2 Specified Features - Filterpress Filter presscheck Filter surface4,35 m² Number of platens12 Internal platen sizes500 x 500 mm External platen sizes630 x 630 mm Platen thickness60 mm and 90 mm Cake capacity71 l. Central inletDN50 Connectionscheck With hand valvescheck Hydraulic closingcheck With feeding pompcheck Capacity20 m³/h Motor9,2 kW 400 V 2885 rpm MaterialPolypropylene, Stainless steel 1.4404 (316L) General Year of construction2013 LocationBarneveld With switchgear(as is) Floorspace2,50 x 1,20 m Total height1,60 m Weight2000 kg CEcheck Extra information Extra Specifications12 plates: 1 head plate, 5 membrane plates, 4 intermediate ...

General SKU296Y560 MakeLe Carbone-Lorraine Serial17461 Pressure Working pressure shell6 Bar Working pressure tubes8 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface80 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface± 80 m² Tube capacity340 l. Number of tubes:± 220 Tube diameter± 16 mm Tube length± 7150 mm Max. temperature60 °C Shell diameter670 mm Shell length7742 mm Max. temperature60 °C Shell connectionsø 200 mm Cover connectionsDN 200 MaterialGraphite, Mild steel General TypePOLYBLOC EXCHANGER NCH 61OG Year of construction1996 LocationBarneveld Floorspace7,75 x 1,05 m Total height1,5 m Weight8000 kg Extra information 15 blocks Graphilor BS 1PP/1PS, Refurbished in 2015 by Mersen UK Teeside, empty weight 5.000 KG Generic medicinesOintmentsShell and tube heat ex ...

grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm workpiece weight: 400 kg table longitudinal travel: 650 mm table speeds: 2 - 28 m/min table cross travel: 400 mm speed: 100 - 1000 mm/min grinding wheel size: 300 x 50 x 76,2 mm grinding spindle drive: 3,7 kW peripheral speed: 10 - 32 m/sec total power requirement: 11 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,95 x 2,65 x 2,47 m CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant con ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 122570 € : 2316.57 € : 600 mm : 500 mm : 600 mm : 325 mm : 600 mm : 205 kg : 450 mm : 500 - 2200 1/min : 5,5 kW : 19 kW : 2800 mm : 2800 mm : 2610 mm : 2850 x 2000 x 2470 mm : 3500 kg : 820 mm : Dm. 355 x 38 x Dm. 127 mm : 0,001 mm : 1.7 kW : 2.4 kW : 10 - 150 1/min : 0.005 mm : 0.003 mm iSurface control with 10,4", touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-600S with Sma ...

Key data: 6020 mm, 1 mm

with motorized scissors, with CNC depth stop, with 4-stop finger (tilt-turn finger), with 5 stand units, the machine is located in good and well-maintained condition Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Back gauge (max.) 1000 mm Color: Blue Total power requirement 16 A Dimensions 6900 x 1580 x 1870 mm Weight 3000 kg Upper beam stroke (opening width) 200 mm Sheet thickness adjustment yes, manual Bending angle (max) 140 degrees Roller shears yes, motorized Number of stands 5 pieces Machine number 9538-10

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 870 mm turning diameter over slide: 420 mm turning speeds: 36 - 1600 U/min quill:: 5 MK quill travel: 150 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3990 kg. dimensions: 4500 x 1280 x 1650 mm Scope of delivery - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 630 mm - Fixed steady rest - passage diameter max. 250 mm - Follow-on steady rest - passage diameter max. 110 mm - 1 centering point / 1 follow-on punch point - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective de ...

length: 1000 mm width: 750 mm Equipment: - Measuring plate with T-slot - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 600 x 30 mm capacity 90 degrees: round: 215 mm capacity 90 degrees: square: 195 x 195 mm capacity 90 degrees: flat: 140 x 395 mm capacity 45 degrees: round: 170 mm capacity 45 degrees: square: 170 x 170 mm capacity 45 degrees: flat: 100 x 175 mm turning speeds: 2800 U/min total power requirement: 3.0 kW weight of the machine ca.: 310 kg range L-W-H: 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (underfloor) For cuts from 0° to 180° right and left In aluminum and light metal alloys With rising saw blade With extremely large cutting range (saw blade diameter 600 mm) Digital display for angle adjustment from 0° to 180° - Manually opening safety cover - Hydro-pneumatic saw blade feed (via two-hand operation) - 2 pneumatic vertical vices with quick adjustment - Heavy-duty cast iron construction ensures vibration-free . . operation  ...

power capacity: 0,75 kW degree: 45° Grad turning speeds: 10.000 U/min milling height: 4,0 mm motor: 400 Volt range L-W-H: 560 x 300 x 450 mm weight: 44,0 kg Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 900 kg traversing speed: 91 m/min dimensions of the machine ca.: 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling  ...

sheet width: 3050 mm plate thickness: 6.35 mm thickness at Niro-steel: 4.00 mm : 8.00 mm down holder: 10 Stück cutting angle: 0°40 - 2°20 Grad : 3340 mm work height max.: 860 mm : 575 mm Control: GP 37W2 : 13 - 33 0: max. 315 bar oil volume: 100 ltr. total power requirement: 6.0 kW weight of the machine ca.: 6030 + 1850 kg In good condition () current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left (GP 37W2) Machine control including information display Main display with 4 control panels Control/operation of all functions Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle ad ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 € : 1566.81 € : Doppelsäulenführung : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 1000 x 600 mm : rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm : 4 kW : 7.5 kW : 0.12 kW : 4400 mm : 2270 mm : 2660 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was crea ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to : 400 mm : 750x570 mm : 750x615 mm : 630 mm : 300 mm/s : 10-25 mm/s : 7.5 kW : 1710 mm : 1150 mm : 3170 mm : 4900 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 3000 kN heating plates:: 600 x 630 mm electrically heated:: °C heating power:: kW piston stroke:: 420 mm no. of stages:: 1 Condition: Used, reconditioned Specification: Press 600 x 630 mm, second-hand - clamping force: 300 tonnes (3,000 kN) - closing: from bottom to top - Heating platens: 2 electric platens, with new heating rods - Heating platen dimensions approx.: 600 x 630 mm - Distance between the heating platens approx.: 420 mm - New electric valves - AC machine output oil pump: 5.5 kW - New control cabinet with Siemens 7’ touch panel - PLC control system make Siemens S7-1200 - New cabling - Frequency inverter made by Schneider - Light barriers in the front area, Overhauled in accordance with CE standard safety regulations Operating instructions and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS ...

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, reconditioned Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylinder refurbishment - Feed roller refurbishment - New safety cage - New rotary joint for water - New AC motor: 18.5 kW - New control cabinet with Siemens S7-1200 PLC system - New control panel with Siemens KTP700 Basic touch panel - New Siemens G120 frequency converter for variable speed - Remote maintenance device - New cabling - Pressure sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Refurbished in accordance with CE standard safety regulations Warranty: 1 year Option: TCU for temperature control of the water up to 95°C, for placement near the extruder The data for this ad  ...

liter capacity: 600 l Pressure of pump: 8 / 20 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 700 mm width: 700 mm height: 630 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6040 mm plate thickness: 4 mm total power requirement: 12 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m - Specification - backstop - Roller tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1510 mm width: 680 mm height: 990 mm weight of the machine ca.: 0,55 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

we sell capital spare parts - new, non OEM products, partially in storage. GE supplier, remanufactured . Combustion liners, Transition pieces Nozzles Blades Vanes etc

Striebig Automat TRK 6220 AV vertical (floor-standing) panel cutting saw with Schneeberger Positron positioning control for the precise horizontal and vertical cutting of wood-based, plastic and composite panels. Can be freestanding or wall-mounted. The machine operates with manual feed; the automatic feed function is currently not operational. Technical data: Cutting length: 5,300 mm Cutting width: 2,200 mm Material thickness: max. 80 mm Motor: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: Screen: 6 mm Motor: 2 x 90 kW Inner diameter of die: approx. 660 mm Number of press rollers: 2 Pressing capacity: up to approx. 3–5 t/h Condition: Gebraucht Location: Tauberbischofsheim, Germany

grinding length: 1025 mm grinding width: 520 mm workpiece height: - mm Control: SINUMERIK 840 D tool taper: HSK-A 63 A - axis: + 110 / - 5 ° workpiece weight: 30 kg distance grinding spindle - table min./max.: 473,5 - 1023,5 mm x-axis: 520 mm y-axis: 550 mm z-axis: 1000 mm V-axis: 166 mm feed x-axis: 4 - 6.000 mm/min feed y- axis: 4 - 4.000 mm/min Feed z- axis: 30 - 25.000 mm / min. table dimensions: 1.400 x 874 mm spindle speeds (infinitely variable): 0 - 12.000 U/min power capacity - grinding motor: 35,00 kW grinding wheel diam. min/max.: 100 / 300 grinding wheel width: 60 mm total power requirement: 100,00 kW weight of the machine ca.: 11,00 t dimensions of the machine ca.: 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool chang ...

grinding length: 1025 mm grinding width: 520 mm workpiece height: - mm Control: SINUMERIK 840 D tool taper: HSK-A 63 A - axis: + 110 / - 5 ° workpiece weight: 30 kg distance grinding spindle - table min./max.: 473,5 - 1023,5 mm x-axis: 520 mm y-axis: 550 mm z-axis: 1000 mm V-axis: 166 mm feed x-axis: 4 - 6.000 mm/min feed y- axis: 4 - 4.000 mm/min Feed z- axis: 30 - 25.000 mm / min. table dimensions: 1.400 x 874 mm spindle speeds (infinitely variable): 0 - 12.000 U/min power capacity - grinding motor: 35,00 kW grinding wheel diam. min/max.: 100 / 300 grinding wheel width: 60 mm total power requirement: 100,00 kW weight of the machine ca.: 11,00 t dimensions of the machine ca.: 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool chang ...

workpiece length: 100 mm swing diameter: 80 mm number of spindles: 2 Control: FANUC 31i-B5 workpiece weight: 2,00 kg centre height: 170 mm grinding wheel diameter: 100 mm grinding wheel hole diameter: 32 grinding wheel width max.: 20 peripheral speed: max. 125 m/sec passage of steadyrest: 45 - 60 mm total power requirement: 75,00 kW weight of the machine ca.: 25,00 t dimensions of the machine ca.: 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control, loading/unloading unit, CO2 extinguishing system, for CBN grinding wheel, tailstock, steady, diamond wheel dresser mounted on the dressing spindle, Wheelhead variant 12 (two grinding spindles can be moved separately). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 100 mm swing diameter: 80 mm number of spindles: 2 Control: FANUC 31i-B5 workpiece weight: 2,00 kg centre height: 170 mm grinding wheel diameter: 100 mm grinding wheel hole diameter: 32 grinding wheel width max.: 20 peripheral speed: max. 125 m/sec passage of steadyrest: 45 - 60 mm total power requirement: 75,00 kW weight of the machine ca.: 25,00 t dimensions of the machine ca.: 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control, loading/unloading unit, CO2 extinguishing system, for CBN grinding wheel, tailstock, steady, diamond wheel dresser mounted on the dressing spindle, Wheelhead variant 12 (two grinding spindles can be moved separately). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 6100 mm distance between columns: 5600 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 160 mm/s bending speed: 0-9 mm/s total power requirement: 32 kW weight of the machine ca.: 36.000 kg dimensions: 6970 x 2300 x 4150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 660 l/min. Effective suction: 520 l/min On / switch-off: 8/10 bar container volume: 270 l voltage: 400 V / 50Hz power capacity: 4 kW turning speeds: 1025 U/min Sound power level: 69 dB dimensions: 960 x 740 x 1905 mm weight: 245 kg - Soundproof stationary piston compressor for work up to 10 bar - Smooth V-belt-driven 2-cylinder unit with two-stage compression - equipped as standard with all fittings and with rubber swinging elements - High performance refrigerated dryer with Super-Dry Technology and ECO shutdown - easily accessible condensate drain under the container The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 bar : 660 l/min. : 520 l/min. turning speeds: 1000 U/min container volume: 90 l power capacity: 4 kW voltage: 400 V weight: 102 kg dimensions: 1110x495x1015 mm - Mobile piston compressor with horizontal tank - Compressed air tank equipped with safety valve, container pressure gauge and condensate drain valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 620 mm stroke: 0-100 mm hole diameter in sheet thickness: 40 in 20 mm no. of strokes: 49 Hub/min Control: total power requirement: 15 kW weight of the machine ca.: 3.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 18,5 kW volt: 400 V ampere: - A total power requirement: 18,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: - m N0. 4700 Parallel shaft geared motor / geared motor NORD / Getriebebau NORD SK 6282 AZ - 180 M / 4 TF H2 n 155 min-1 / max. 2454 Nm / i = 9.39 / hollow shaft Drive: 18.5 Weight approx. 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26 t punching cross-cut in cmm: 80 x 2,5 stroke: - mm total power requirement: 1,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,5 m No. 1096: Revolver hole punch 26 to. EDEL, type SMO 26/660/12 built 1973 with throat depth 660 mm Working area: diam. 80 x 2.5 mm Drive power: 1.5 kW Accessories: 12-station tool magazine Various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 160 kg workpiece length: 250 mm diameter: 620 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m Auswuchtwaage für Schleifscheiben und scheibenförmige Prüfkörper Workspace: 620 x 250 Control: max. Prüfkörpergewicht 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel The data for this ad was created with ModulMWS - the softwar ...

filling capacity: 600 Liter Usable Volume: 400 Liter filling amount: 600 kg workpiece sizes: 850 x 200 mm Individual weight of workpiece: max. 20 kg turning speeds: 4.0 - 18.0 U/min Inner drum width: 920 mm drive motor: 400 V weight of the machine ca.: 1750 kg range L-W-H: 2000 x 1500 x 2000 mm Good / well-maintained condition () Current list price: approx. 30,000 euros Main functions of the machine: - Deburring sharp edges after cutting. - Edge rounding for safer workpieces. - Descaling and rust removal from surfaces. - Oil and grease removal - Low noise level - Integrated dust extraction - Quick emptying - Sturdy lining The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.