vr 6 used for sale

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 9405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 288.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-6068hfu82-generator -200kva-used/42307, , = More information =, , Empty weight: 1.970 kg, Type number: 6068HFU82 GENERATOR 200KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 8540 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 288.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-6068hfu82-generator -200kva-used/42306, , = More information =, , Empty weight: 2.030 kg, Type number: 6068HFU82 GENERATOR 200KVA

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 3120 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 480 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 600 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 867 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/detroit-diesel-12v92ta-generat or-600kva/42345, , = More information =, , Empty weight: 3.500 kg, Type number: 12V92TA GENERATOR 600KVA

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 115 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 88 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 110 , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 276.1 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/cummins-6bt5-9-cpl0698-generat or-110kva-used/42333, , = More information =, , Empty weight: 1.135 kg, Type number: 6BT5.9 CPL0698 GENERATOR 110KVA

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 7397 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 119 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 100 , Generator Hz: 50 , Generator Volts: 200 , Generator Amps: 289 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/cummins-6bt5-9-generator-100kv a-used/417, , = More information =, , Empty weight: 2.510 kg, Type number: 6BT5.9 Generator 100KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 160 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/john-deere-6068hl557-used/ 42337, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 670 kg, Type number: 6068HL557

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 9000 Hour(s), Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 350 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-6063gk35-co re/42305, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.400 kg, Type number: 6063GK35

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/220, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Technical data for the pallet racking system: Shelving system: SLP Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 21,640 mm Number of fields per row of shelves: 07 pcs. Number of levels plus ground level: 02 pcs. The scope of delivery includes: 08x Pallet rack stand, used Material colour: sendzimir galvanised Profile size: C 80 x 50 x 15 x 3.5 Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) Height: 2,310 mm Depth: 1,100 mm 28x Pallet rack crossbar, used Material colour: grey IPE profile: 100 x 55 mm Agraffe: 3 HK (hook) Clear width: 3,000 mm 56x Locking Pin, Used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 32x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Finish: Carbon s ...

Technical data for the pallet racking system: Shelving system: SLP Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 21,640 mm Number of fields per row of shelves: 07 pcs. Number of levels plus ground level: 02 pcs. The scope of delivery includes: 08x Pallet rack stand, used Material colour: sendzimir galvanised Profile size: C 80 x 50 x 15 x 3.5 Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) Height: 2,310 mm Depth: 1,100 mm 28x Pallet rack crossbar, used Material colour: grey INP profile: 100 x 50 mm Agraffe: 3 HK (hook) Clear width: 2,000 mm 56x Locking Pin, Used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 32x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Finish: Carbon st ...

Mazatrol Matrix Control Travel X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm A-axis: +30°/-120° C-axis: 360° Max. distance from spindle nose to table top edge (table horizontal): 740 mm Min. distance between spindle nose and top of the table (table horizontally): 230 mm Max. distance from spindle nose to table center (vertical): 690 mm Min. distance from spindle nose to table center (vertical): 180 mm Max. table load: 500 kg Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Pallet Changer – Mazak Palletech System 6-fold pallet changer Pallet size: 500 x 500 mm Milling spindle SK-40 Max. spindle speed: 12,000 rpm Drive power milling spindle: 22Kw Tool magazine Number of tool positions: 120 Other equipment • 5-axis simultaneous machining • Synchronized tapping • Rapid traverse constant angle of inclination when moving 3D coordinate conversio ...

Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - / Contact us at -

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

screw ø:: 60 mm screw length:: 15D screw speedl:: -- U/min Condition: used Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 15D - Sold as seen. The buyer is responsible for safety regulations. No CE marking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, reconditioned Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylinder refurbishment - Feed roller refurbishment - New safety cage - New rotary joint for water - New AC motor: 18.5 kW - New control cabinet with Siemens S7-1200 PLC system - New control panel with Siemens KTP700 Basic touch panel - New Siemens G120 frequency converter for variable speed - Remote maintenance device - New cabling - Pressure sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Refurbished in accordance with CE standard safety regulations Warranty: 1 year Option: TCU for temperature control of the water up to 95°C, for placement near the extruder The data for this ad  ...

6600 mm Rexroth conveyor line Conveyor line with its own drive for the transport of workpiece carriers in the longitudinal direction or for the transverse transport of the workpiece carrier between parallel conveyor lines in conjunction with a lifting transverse unit for ejection from a longitudinal to a transverse section and vice versa. Manufacturer: Bosch Rexroth Voltage: 3 x 400 V 50 Hz (16 A) Control voltage: 24 VDC Pumped medium: Timing belt Belt section: 6600 x 500 mm Lifting cross unit: 500 x 430 mm Belt height: 990 mm More items - new and used - can be found in our shop! International shipping costs on request!

New Kelvion / Goedhart VCe-i 635010 Freon evaporator with hot gas defrost built in 2020. Complete with 3 Ziehl-Abegg fans - 50 Hz - 0,72 kW - 1240 RPM - diameter 500 mm and a total airflow of 25.437 m³/h. Specifications: Brand: Goedhart Type: VCe-635010 Capacity: 36,6 kW Refrigerant: Freon Number of fans: 3 Fin space in mm: 10 mm Defrosting: Hot gas Air flow: 25.437 m³/h Sizes: 3560x1000x1010 mm (LxWxH) Year of built: 2020 Volume: 43 dm³ Weight: 340 kg

ID3681 MTU 685 KVA Electric generator year/Year of construction 1989 500 hours only! 5.3 t 685 KVA Electric generator, very good condition 685 KVA Power Generator, Very Good Condition

spindle passage: 375 mm turning diameter over bed: 1030 mm turning length: 1750 mm spindle bore: 375 mm max. turning diameter: 650 mm spindle turning speed range: 5- 500 U/min spindle motor: 45 / 37 kW Control: OSP P300 L x-travel: +330 / -140 mm z-travel: 2040 mm rapid traverse x + z axis: 5 / 10 m/min tail stock: tailstock quill diameter: 180 mm tailstock quill stroke: 200 mm taper in tailstock MT: MT 6 total power requirement: kW weight of the machine ca.: ca 23 t dimensions of the machine ca.: 7,1 x 3,2 x 2,85 m Cnc Oil Country Lathe CNC-controlled oilfield lathe For heavy-duty machining of large and heavy turned parts and pipe end machining - CNC Control OSP P300L - Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.) - Tool Revolver 12-fold (static Tools) - Chip Conveyor - Exhauster Power on: 20.538h , N/C Running Time: 2.270h Spindle Revolution Time: 2.287h, Cuttin ...

Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

An ABB robot in its original packaging is available. Payload: 180kg, reach: 3150mm, weight: approx. 1750kg. Documentation available. An on-site inspection is possible.

An unused three-phase electric motor VEM is available. Design: IM1001, protection class: IP55, rotation direction: CCW, insulation class: F, lubrication system: Shell Alvania RL3, rated power: 4600kW (approx. 4.6MW), rated voltage: 6300V, rated current: 460A, power factor: 0.88, rotor voltage: 2000V, rated speed: 994rpm, moment of inertia: 690km/m². Machine dimensions X/Y/Z: approx. 4150mm/2300mm/1900mm, weight: approx. 20000kg. The machine is unused and therefore as new. Documentation vorhanden. An on-site inspection is possible.

A Meyer color sorting system for the optical separation of small grain sizes in the food industry is available. Chutes: 10, cameras: 20, camera type: RGB 5400 CCD, compressor power: 37kW, compressor delivery rate: 7.1m³/min. Including integrated stainless steel container, refrigerant dryer and screw compressor. The conveying elements were integrated used and may need to be renewed if required. Documentation available. An on-site inspection is possible.

Lippert belt conveyor GF 30000-750-600 RA2269 Technical data: Conveyor length (NL): 30000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 30000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0 ...

Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

Key data: 1400 KW, 1800 kVA, 10500 V

MWM Gas CHP TBG 620 V16 K Gas electricity and heat generator from 1999, 83,369 operating hours, with control, silencers and table cooler. 1 available 1,354 KWel x 1,500 rpm, 10,500 V/50 Hz. AC generator: AVK DIG 130 G/4, 1,800 KVA Manufacturer: MWM Model: TBG 620 V16 K Type: Natural Gas CHP Serial Number: 69886800117 Output [KWel]: 1,354 Engine: TBG 620 V16 K Engine serial number: 2201219 Engine power [KW]: 1,400 Year of Make: 1999 Hours: 83,369 Weight gene set [kg]: 13.860 Dimensions LxWxH [m]: 6.40 x 2.10 x 2.30 AC Generator AVK DIG 130 G/4 Manufacturer: AVK Model: DIG 130 G/4 Type: AC Synchronous Generator Serial Number: 8423506 A101 Power [KVA]: 1,800 Voltage [V]: 10,500 Frequency [Hz]: 50 Current [A]: 99 Speed [1/min]: 1,500 Year of Make: 1999 Hours: 83,369

Transnorm belt curve conveyor right GKF 90°-810-600 IR600 RA1804 Technical data: Type designation: Belt curve conveyor TS 1500-100 Frame width (NB): 810 mm belt width (GuB): 600 mm height (BH): 330 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: KT58 Year of construction: 1990 Optionally available: Supports Side guide one and both sides Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1990 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 810 Belt width in mm: 600 angle: 90° Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 scope of delivery: without supports and side guid ...

rand: Dr.Boy Model: 60E Year of construction: 2023 Working hours: 50 Screw diameter: 32 mm Injection pressure max.: 2.142 bar Shotvolume max.: 100,5 cm3 Clamping force: 60 T Max. distance between holms: 360 x 335 mm Min. mould height: 250 mm Distance between plates max. 650 mm Measurements: 3.450 x 1.150 x 1.950 mm Weight: 2.250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + Licence fee) • 4 Free programmable AIO’s • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed & moving platen – Water distributor 8-fold – Ejector with quick coupling – Open nozzle with thread tip • Energy distribution box 6-fold (feeding via second cable)  ...

Tumbler screening machine, used Type : ATS 600 / 2 Manufacturer : Allgaier --> Ø 600 mm, 2 screen decks, 3 outlets, with feed hopper.

- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg

FOR SALE 2 DRY TRANSFORMER LOADED

Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO 091 26-110-100 year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/f ...

Specifications: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% ED); 10 kW (100 & ED) Speed: 18,000 1/min Tool holder: SK 40 SK 40 magazine slots: 60 Equipment: - MillPlus IT 3D path control - Horizontal tool changing device Double gripper - Automatic swivel milling head - Rotating viewing panel - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Mode 4: Advanced manual intervention - Flushing gun with pump - Tool breakage detection SK 40 mechanical design, range: 63...310 mm / +/- 3 mm - Interval switching chip conveyor - Internal coolant supply can be switched from 40 bar to 80 bar

control: 840D-PCU 50 V1 : 3 coolant: ja chip conveyor: ja kW generator - rated current: 110 A connected load: 56 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the frame profile: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Frame profile, new product Material colour: sendzimir galvanised Stand Type: P73 Profile dimensions: 75 x 75 x 2.0 mm Height: 10,694 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Inv. Num. : 8857 Type: IRB 6400 M98 Producer: ABB Created: 2003 Parameters: Maximum arm reach: 2400 mm Number of axles: 6 pieces Maximum load capacity: 120 kg Machine weight: 2030 kg

turning diameter: 270 mm turning length: 630 mm control: SIN840D swing over bed: 400 mm swing diameter over slide rest: 220 mm longitudinal slide -travel: 745 mm cross slide - travel: 200 mm turning speeds: 10 - 4.000 U/min power capacity at 100 % load: 15,00 kW spindle head DIN 55026 - Size: 6 spindle bore: 62 mm chucking diameter: max. 315 mm feed x-axis: 1 - 12.000 mm/min rapid traverse X-axis: 12,00 m/min Feed z- axis: 1 - 20.000 mm / min. rapid traverse Z-axis: 20,00 m/min tailstock quill taper MT: 3 quill stroke: 112 mm quill pressure: 10,00 kN tool turret with 12 work positions: tool taper DIN 69880: Ø 30 mm Tool drive speed max.: 4.000 1/min total power requirement: 37,00 kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool hol ...

Height=1.93 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 147 kg,

approx. 1.400 pieces, Euro stack transport crates, SSI Schaefer, EF 6220 D1, 60x40x 22cm, with half-height opening on the narrow side - used - : Price from location: 5.250.-€ (net)! Only complete acceptance! Manufacturer: SSI Schaefer Type: EF 6220 D1 Year of manufacture: unknown Colour: red Metrics Exterior width [mm]: 400 Exterior height [mm]: 220 Exterior length [mm]: 600 Basic dimensions: 600 x 400 Inner width [mm]: 353 Interior height [mm]: 216 Inner length [mm]: 553 Usable height in stack [mm]: 196 Condition: good Available: immediately Location: NRW

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 2100x1250x1750 mm weight: 700 kg total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1900x1250x1750 mm weight: 600 kg total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1250x1750 mm total power requirement: 6,5 kw weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 500x300 mm Capacity: 60 Watt Weight: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1200x1250 mm Weight: 1000 kg Total power requirement: 16,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1200x1400 mm Weight: 1100 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x1200x1650 mm Weight: 440 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 940x1250x1400 mm Weight: 250 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.