vr 6 used for sale

Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Mass of tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating Lmmuapd8S 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Outer dimensions inc ...

FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...

Mobile log saw Pezzolato timmber quenn 600 fully hydraulic diesel engine

Differential Pressure Gauge ATEQ F620 with Stäubli coupling Electronic pressure regulator from 1 to 10 bar +-500Pa with test leak Original price 9770€ Almost mint condition Production line has been phased out

table surface area: 600 x 250 mm control: Siemens - SINUMERIK travel -x axis: 660 mm travel -y axis: 360 mm travel -z axis: 280 / 275 mm Surface Grinding Machine | JUNG - J 630 E The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: J630E | J630 E | J 630-E | J-630 E The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 600 x 300 x 400 mm magnetic plate size: 600 x 300 mm distance spindle center to table: 5500 mm max. table load: 250 kg grinding wheel speeds: 1.900 U/min longitudinal feed: 680 mm cross travel: 245 mm Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ARISA S-2-630-240-120-LD mechanical press was built in 2005 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, such as precise punching and stamping of metal parts. In addition to its standard purpose, depending on the tooling and material feed systems used, the machine can also be used as a transfer press or progressive press. All machining processes are performed with a high press force of 630 tonnes. The drive system, in the form of a flywheel and an eccentric gear, cooperating with two connecting rods, ensures even torque transmission and smooth control of the slider movement. The slider, on the other hand, is guided at eight points using roller guides, which increas ...

- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...

Used ISERNHÄGER Sourdough Line ASB 600 RM - 3pcs available - Capacity 600 litres Visits and test runs are possible by arrangement.

Dough laminator Dimensions: 3480x1110x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 610x2800mm Distance with adjustable roller: 1-40 mm Weight: 260kg

Key data: 635 mm, 510 mm, 460 mm

CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.

; Gross weight [kg]: 2482; Engine: Cummins 6CTAA8.3-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 224

Technical data for the shelf: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Shelves, used Material colour: sendzimir galvanised f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight|pcs.: approx. 8,12 kg max. load per shelf 75 kg, with the same load. distributed load. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: KD 613-G Year of Make: 1980 Degree of protection: IP 44 Speed: 455 rpm Operating voltage: 380 / 660 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 266 L/min. Dimensions: L 1900 x W 1000 x H 800 mm Curb weight: Approx. 1500 kg Condition: Used Price: On request

Technical data for the shelf: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Shelves, used Material colour: sendzimir galvanised f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 590 mm Total height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight|pcs.: approx. 6,90 kg Note: Water permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows good air circulation, e.g. in deep-freeze warehouses. Translucent – creates a bright working environment in the warehouse. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated ...

Key data: 250 KW, 250 kVA, 400 V

Package of 250kW Gas Generator for sale, see below the technical specification of the unit: Make: Scania Model: 6R20.1BO Rated Output: 250 kWe Fuel : Gas Serial No: 003837 YOB: 2014 Volt: 400 V Frequency: 50 Hz Speed: 1500 RPM Type: Containerised The unit has been maintained throughout its life and available on request upon inspection. The Containerised Package include the exhaust silencers, air ducting and table cooler radiator (pictures are attached). For any further enquiry and pricing information, feel free to reach us at: Enquiriesukpowergeneratorsltd 00447956518924

Pressing force max KN 600 Withdrawal force max KN 300 Die Supporting force max KN 300 Die return force max KN 32 Upper punch travel mm 190 Upper punch adj.travel mm 200 Filling height max mm 180 Pressing travel max. mm 90 Withdraw travel max. mm 95 Top pressing travel max mm 18 Adjustment at Die position mm 50 Filler travel mm 140 Maximum forming Diameter mm 130 Cycle stroke /min 12-25 Main Motor Power KW 15 Total Power KW 15 Speed control method Inverter Driving pressure for Clutch MPa 0.55 Pre-load Travel mm 110 Total air consumption L/min 300 Total weight Kg 5800 Overall size H mm 3200 W mm 1750 D mm 1480

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-600 grams Machine weight: 65 kg

Kannegiesser belt conveyor GF 6000-880-800 RA2299 Make: Kannegiesser as good as new, exhibition machine year of construction 2014 Conveyor length (FL): 6000 mm Belt width (GB): 800 mm Nominal/outer width (NB): 880 mm Conveyor speed: freely adjustable between -0,95 and 0,95 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 6000 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Nord KW: , 0,75/S1 Ampere: 0,9 Conveyor speed m / s: -0,95 - 0,95 scope of delivery: without supports and side guides Für eine i ...

Siemens SIMATIC C7-621 PLC with Integrated HMI. The Siemens SIMATIC C7-621 is a compact industrial automation controller that combines a powerful PLC (based on the S7-300 series) with an integrated operator interface. This all-in-one unit is designed for machine control applications where space-saving and reliability are essential. The device features a built-in display and keypad, allowing direct operator interaction without the need for an external HMI panel. It includes integrated digital and analog inputs/outputs and supports expansion with additional modules for increased flexibility. Key Features: Integrated PLC (S7-300 based CPU) Built-in HMI with display and keypad Compact, space-saving design Integrated I/O (digital and analog) MPI communication interface Expandable with additional I/O modules Programmable with Siemens STEP 7

We have a HURCO CNC milling machine from 2008 to offer: HURCO VMX 64T Travel: X1625 Y860 Z760 Speed max. 8000 rpm (limited by the new bearings after spindle replacement) Sporadic clamping of the interchangeable arm

roller conveyor 2200-640-600 RA2292 Make: Blume Roller width (RB): 600 mm Nominal/outer width (NB): 640 mm Length: 2200 mm Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 660 Roll width in mm: 600 Roll division in mm: 100 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

I offer for sale an unused and completely original packaged industrial shelf SSI Schaefer LTR600. The shelf was originally ordered for a project, but never assembled. All components are in new condition and are completely present. Technical data • Model: SSI Schaefer LTR600, single-sided longitudinal vertical shelf • Overall length: 39.3 m • Height: 7.6–8.1 m • Depth: 800 mm • 14 fields, each with a clear field width of 2,700 mm • 7 levels per field • Per level: 4 depth pads type UN Scope of Delivery • Complete shelf line LTR600 • All stud frames (7.6–8.1 m, orig.) • All trusses (2.7 m) • All depth pads type UN • Small parts & fasteners • Original SSI Schaefer packaging Condition • New • Never set up • Original packaging • Complete Logistics / Pick-up • Location: Fellheim (Bavaria) • Longest components: 7.6� ...

turning diameter: 210 mm turning length: 600 mm control: INDEX C 200 total power requirement: 35 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m On behalf of the customer Price negotiable / against bid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This geared motor is manufactured by Muller Martini Weiterverarbeitungsmaschinen, under item no. 3672.1797.2. The price is CH 3000.- at Muller Martini.

AVIA VMC 650 - Vertical Machining Center Recording: ISO 40 X/Y/Z: 650 / 540 / 620 mm The AVIA VMC 650 vertical machining center has been specially developed for the production of small to medium quantities. With a maximum workpiece weight of 700 kg, even heavier parts can be machined without any problems. The high rapid traverse speeds of 25 m/min in the X, Y and Z axes ensure high efficiency of the machine. With a spindle speed of 10000 rpm, a very good surface is guaranteed for a wide variety of materials. - Heidenhain iTNC 530 HSCI CNC control - Tool changer with 24 positions - Chip screw conveyor - Year of construction 2012 Technical data Table: - Table size: 800 x 540 mm - T-slots (size/spacing/number): 18 mm / 100 mm / 5 - Max. workpiece weight: 700 kg Spindle: - Type: Cartridge - Tool holder: ISO 40 according to PN-92/M-55085/01 (DIN 69871A) - Tightening  ...

Key data: 90 KW, 1485 1/min

TECHNICAL SPECIFICATIONS Manufacturer: ELEKTRA Elektromotoren Dillingen Description: Electric drive motor Type: IEC squirrel cage motor (EN 60034) Power: 90 kW Speed: 1485 1/min Frequency: 50 Hz Standard voltage: 400 V Design: IM B3 Degree of protection: IP 55 Weight: 580 kg SPECIFIC COMMENT - Incl. 1 flywheel extra

Marelli MJH630MA - Unused - 2800 kVa - Generator End

B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC

Marelli MJH630MA - Unused - 3000 kVa - Generator End

Used machine in good condition. Available for immediate delivery. - Spindle power?: 28/21 kW - Control: 840 D SIEMENS - Axes: 5 - Workpiece diameter: 240 mm - Max. spindle speed: 5.000 rpm - Stroke (X): 190 mm - Stroke (Y): 40 mm - Stroke (Z): 555 mm - Maximum tool diameter ?: 200 mm - Main spindle bore: 79 mm - Weight: 6.500 kg

Used machine in good condition. Available for immediate delivery. - Laser Type: CNC Fanuc 31iLB - Max. workpiece weight: 950 kg - Positioning speed X/Y: 160 m/min - Laser Output: 6 kW - Machine ON Working hours: 19.600 h - Beam ON Working hours: 5469 h - Weight: 5.700 kg - Dimensions (long x wide x high): 3.000 x 1.500 x 100 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 50 mm - Clamping force: 1.600 kN - Shot weight max: 297 g - Injection pressure: 2.080 bar - Injection volume: 353 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 225 / 66 mm / kN - Mould opening stroke max: 650 mm - Mould height min: 250 mm - Daylight between platens max: 900 mm - Platen size (h x v): 685 x 685 mm - Distance between tie-bars (h x v): 470 x 470 mm - Operating hours: n/a - Power: installed max: ? 30 kW - Weight: 6.630 kg - Dimensions (long x wide x high): 5.000 x 1.615 x 2.110 mm