KREISSÃ?GENSCHÃ?RFMASCHINE VALDEZ FINIMAT IV B - 600 TS - 21-06-007 Shipping time: immediately Number: 21-06-007 Manufacturer: Vollmer Type: Finimat IV B - 600 TS MACHINE DATA Year built: approx 1980 L x W x H: CA. 1300 x 1200 x 1900 mm Weight: approx. 550 kg Good general condition TECHNICAL DATA Loop scope: Most saws Ã?: approx. Ã? 600 mm Smallest cutting diameter: approx. Ã? 100 mm Maximum cutting width: approx. 6 mm Largest tooth pitch: approx. 110 mm Smallest pitch: approx. 7 mm Grinding angle: Rake angle: approx. 5-45 degrees Back - clearance angle: approx. 8-45 degree Helix angle gear back: approx. 0-45 deg ...
Used Bandsägenschärf and cabinet maker Internal number: m2678 Manufacturer Vollmer Type CV 10 U Ma. Number 705 S Built in 1982 Approx. 0,5 kW Weight 120kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. A forklift/crane for loading is available. We reserve the right to a sale. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarantee is excluded. The goods will be sold from location / ca ...
Manufacturer: Vollmer, Type: CMS 13M, Year: 1994, Bore diameter: 5 - 50, Max. disk diameter in mm: 200, Min-max external diameter mm: 20 - 525, Min.-max. tooth pitch mm: 26 , Year :1994
Sharpening machine Vollmer Model CMS 10 U Built in 1985 Technical data, see Figure 2. The instructions ect. is there! Loading no problem. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)
working area: 2 - 22 mm speed: 20 m/min Bar length: 6500 mm CENTERLESS GRINDING and POLISHING MACHINE Construction SCHUMAG Type 700 New-in approx. 1970 Condition good Working range 2 ? 22 mm Ø Bar lengths max. 6500 mm Through speed 1 - 20 m/min. infinitely Circumferential speed 45 m/sec. Grinding tolerance h 6 Drive of grinding wheels 2 x 11 kW, 1465 R/min. Power 380 V, 50 cycles Scope of supply: - Material loading table, approx. 6500 mm - Entry U-profil - Grinding machine with: Material separation device VOLLMER diamter measuring device Transport discs Grinding wheel-Ø: 350 mm, and width: 150 mm ...
Qty. 1 Second-hand 6-Hi copper foil rolling mill Mfc.: CNPT, IMS, Vollmer, Siemens, ABB Built: 2014 Type: 6-Hi-reversing Incoming width: 450?650 mm Rolling force: 1200 kN Entry thickness: Approx. 0.3 mm Deviation: Longitude: ±1.5% Traverse: ±1% Exit thickness: Min. 0.009 mm Passline height: +900 mm Overlapping: ?±0.5 mm Telescoping: ?2 mm Flatness: ?15 I Qty. 2 IMS gauge meters AGC system supplied by CNPT 1 Vollmer shapemeter roll 1 CNPT shapemeter roll Rolling speed: Max. 600 m/min Threading speed: 12 m/min
Width of the band swa blades: mm Sharpening pitch: mm Sharpening speed: Zähne/min. total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
STRIP THICKNESS AND WIDTH GAUGE type: supposedly VBK 563/12 E partially revamped: (precision dial gauge 20 MUBE/0 including slide bush, caliper and gauge slide revamped by VOLLMER) incl. 2 pc. of amplifier, manufacturer VOLLMER, type VMF, for thickness and width measuring process
Type VODO MF-600 Motor power 0,37 kW Speed 2800 rpm Current 2,2/1,25 A Dimensions 0,6x0,6x0,6 mm
Gate sawmill Wurster & Dietz Frame W & D Type GXV 71 Frame width 710 mm with fixing Gattersägenschärfmaschine Valdez Gate Cabinet saws HSK Vollmer Kreissägenschärfmaschine Valdez Be hem saw W & D, model: LC 12 Tower slewing crane Wolf RADIUS 19 m Lifting capacity up to 2 tons. was used for the loading and unloading of trucks Machines in warm, impeccable condition. The gate, only 1-2 days per week was cut in the last 5 years.
Manufacturer _ BONGIOANNI Model_ 1300 Features_ ARTIGLIO Carriage with 5 hydraulic clamping; ? Hydraulic Advancing; ? Chain Loading at 4 ways with hydraulic arms; ? Unloading Rollers System; ? Reverse Feeding Chain; ? Grinder manufactured by Vollmer. ?
Vollmer Kreissaegenschaerfautomat Cana / s Hole diameter: 10-160 mm Outside diameter: 120-1000 mm Grinding wheel diameter: 250 mm Grinding wheel bore: 20 mm Tooth pitch: 10-90 mm Tooth height: up to 40 mm Rake angle 10 to + 30° Sheet thickness: up to 6 mm Grinding angle: 5 °, 10°, 15°, 20 degrees Feed speed: 30, 50, 75 teeth/min Motor power: 0,75 + 0.75 kW 4 tooth forms: Grinding, are newly mounted drive and blower motor. Changed oil and belt.
1 post original vollmer part washers for switching device (CNE and Cana/s) Outside diameter: 280 mm Bore: 150 mm Number of teeth: 20 / 42 / 48 / 54 / 56 / 64 / 72 / 78 / 100 / 110; Good
Vollmer soldering LG 21 H to the drain and brazing of CARBIDE teeth of circular saw blades Circular saw blades: Outside diameter: 100-830 mm Hole diameter: 6-160 mm Rake angle: - 10° to + 35 ° Power: 1.2 kW Weight: 75 kg
1 gebr. VOLLMER Gattersaegenschaerfmaschine CnHV, overhauled Grinding wheels ?: 200 mm Tooth pitch 15-36 mm Tooth depth at 0 ° rake angle: 5-30 mm Speeds: 30, 50, 75 teeth/min Rake angle: 0 °-30 ° Power: kW 0,55 + 0.55 + 0.125 4 slide of curves for different tooth shapes Maximum blade width: 140 mm Smallest blade width: 65 mm Greatest length of gear: 1.450 mm Very good condition, all wear parts replaced, new storage engines
Vollmer Flanken Sander CHHF 21 H Machines for unilateral flank grinding of carbide tipped circular saw blades with base Circular saw blades: Outer diameter: 80 mm to 700 mm Hole diameter: 10 mm to 105 mm Tooth pitch: from 8 mm Rake angle: 0 ° to 30 ° Tangential clearance angle: 0 ° up 5 ° Radial clearance angle: - 7 ° to + 3 ° Loop road (HM length): up to 15 mm Grinding wheel: Outside diameter: 100 mm Hole diameter: 32 mm Connected load: 0.49 kW Coolant pump capacity: 40 l / min. Coolant tank capacity: approx. 30 l Weight: approx. 80 kg
Manufacturer: Vollmer Type: CANA/HG Year of construction: 1980 Voltage: 380 V Approximate weight: 520 kg Blade width: 60 to 200 mm Cutting length: 950 mm to 2000 mm Sheet thickness: up to 6 mm Tooth pitch: 14 to 40 mm Tooth height: up to 20 mm Working speed: 30,50,75 teeth/min Only for straight grinding!; ready for use
Precision Cabinet machine type PH 4 d Double-sided, 150-750 mm diameter, combined for gate and circular saws Sheet thicknesses 1,5-3, 0 mm,. Tooth pitch from 8 mm and tooth height of 7 mm.; ready for use
Sharpening machine for gang saws. 1994 gene. Outdated and hardly in use. 4 piece reversible tooth shapes. 3 piece reversible feed rates. Wheels diameter 200 mm Fully automatic sharpening process. Photos of original condition.
1 used circular saw sharpening machine Cne II Diameter of circular sawblades: 40 - 1000 mm Diameter of grindig disk: 200 mm Bore of grinding disk 20 mm Width of teeth: 5 - 60 mm Teeth high: 3 - 30 mm Span angle: -10° to 30° Blade thickness: up to 6 mm speed: 30, 60, 80 teeth /min. Weight: ca. 300 kg engines got new bearings ; very well
Gang saw blade sharpening machine Vollmer Cana for gang saws Built in 1962 Weight approx. 400 kg L x W x H: 3.0 x 0.6 x 0.8 m The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Subject to changes, errors, and intermediate sale! MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Schaerf machine Vollmer Cana HG Gang saw Built in 1970 Weight approx. 400 kg L x W x H: 3.0 x 0.6 x 0.8 m The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Cabinet apparatus VOLLMER type PH2
Sharpening TOOL VOLLMER FINZ 4-800 Sharpening TOOL VOLLMER FINZ 4-800 Sharpening TOOL VOLLMER FINZ 4-800 Manufacturer: Sharpening TOOL VOLLMER FINZ 4-800 Type: Sharpening TOOL VOLLMER FINZ 4-800 Year of construction: 1980 Machine condition: very good complett Offertype: used machine offer Location: Poland Technical data: Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC
Grinding machines Sharpening TOOL VOLLMER FINZ 4-800 Sharpening TOOL VOLLMER FINZ 4-800 finimat vollmer Second hand 1980 abcs://abc.youtube.com/watch?v=-ja0xmb-dnI Make: Sharpening TOOL VOLLMER FINZ 4-800 . Model: Sharpening TOOL VOLLMER FINZ 4-800 finimat vollmer . Description: Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING SAWS WIDIA DISK FOR AUTOMATIC HYDRAULIC full automatic Year: 1980 film with work this grinder abcs://abc.youtube.com/watch?v=-ja0xmb-dnI ...
Gang saws sharpening machine Valdez D-66-50-0 Masch. No. 143 Built in 1988 Weight 280 kg L x W x H: 300 x 80 x 170 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
suitable for all circular saws up to 1000 mm 3 grinding tooth forms 3 speeds 30/60/80 teeth/min browsed, newly painted and ready for use Price ex works 2.900,00 Gate rail fee: 250,00 Extra part head: used 500.00 new 750.00
IDEAL BSS 040 Made in Germany Used machine Brand: IDEAL-WERK Type: BSS 040 Band saw blade welder Band saws, band knives and steels up to 40 mm 400V 3.5kVa 50-60Hz Year of production 1998 Serial nmbr.223920 Weight 67/97 kg Dimensions packaging 720 x 590 x 630 Band saws flash butt welding machine Strip steel max 40 mm TOP condition On stock Vollmer BS grinding machine, Ideal BSS 060 and IDEAL Werk BAS 050
Sharpening machine Vollmer CANA/H Progress from right side to the grinding wheel Width max blade mm 200 Diameter grinding wheel mm 200 Pitch of tooth from 5-55 mm Amgle of cut from 0-35? Alternating blades: width up to mm 160 Length of toothing up to mm 1480 N? 04 selectable cams of tooth pitch With device for blades for gatter Completely hydraulic Use and maintenance book Good conditions.