vmi az used for sale

Fork mixer VMI 2330MAEH extendable with 1 boiler -Extendable VMI mixer -Model: 2330MAEH -with 1 stainless steel boiler

VMI Spiral Kneader Type: MB1024 AEH Specifications: – Automatic timer switching on and off – 2 speeds slow and fast – with 1 boiler – with flour dust cover - Year of construction 1999 Height: 180cm Width: 140cm Depth: 120cm

VMI 3500L mixing vessel 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

VMI 1776L mixing vessel 1992, Stainless, 1776L jacketed mixing vessel, 4.4Bar, top mounted agitation and scrape surface, bottom mounted high shear mixer, with Inoxpa centrifugal pump, 3Ph

VMI 2936L mixing vessel 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph

VMI 2400L high shear mixing vessel 2012, Stainless, 2400l jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

General SKU397M492 LocationBarneveld MakeVMI Rayneri TypeSupertest Air No.142652 Year of construction2006 Main Features MaterialStainless steel Length300 mm Specified Features - Stirrer Propellor stirrercheck Shaft length300mm Sizes stirring headdia. 70mm Pneumatic motorcheck With variable speed drivecheck Mounted on supportcheck Adjustable heightcheck MaterialStainless steel Information Mounted on framecheck With switchcheck With switchgearcheck Floorspace0,6x0,5 M Total height1,0 M Weight35 KGStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU292M361 LocationBarneveld MakeVMI Rayneri TypePIL.direct 15/750 VF No.75953 Year of construction1996 Main Features MaterialStainless steel Motor0.75 KW Length700 mm Specified Features - Stirrer MaterialStainless steel Propellor stirrercheck Shaft length± 700mm Sizes stirring headø 110mm Motor0,75 KW, 230/400 Volt With frequency controllercheck Speed mixing shaft100-808 rpm Mounted on supportcheck Adjustable heightcheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,1 x0,8 M Total height1,7 M Weight150 KGStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Plea ...

Used VMI s.a.s. Saturno 2 Teste Labeller Labeller allows you to automate labeling on products of different formats. Preserved in perfect condition Below is more technical information on the machine: Maximum label length: 300 mm (standard) Minimum label length: 10 mm Spool Inner Diameter: 38mm Max coil external diameter: 300 mm Variable speed Label stop accuracy: 0.5 mm Motorisation: step/step Start with photocell or microswitch Weight: 120 kg Supply voltage: 220V 50/60Hz Year of construction: 2009 CE conformity

Dough capacity: 160 kg; Boiler volume: 280 litres; incl. 1 boiler

Electric motor: Atex Eexd II BT4 + IP 55 Power : 7,5 KW at 3000 rpm (Can also be controlled at 1500 rpm) Power supply 230/400V Tri 50 Hz Stirring : Rotor Stator ?100 mm Commissioning date: 12/2005 Water lubrication system

Bowl lift

The 5 liter trimix is intended for industrial use for the preparation of gels, creams, ointments requiring dispersion, dissolution, homogenization, deaeration, heat exchange. The Trimix is made up of: A table frame with stainless steel casing A mixer with two pendular coaxial movements: Slow peripheral movement: Motor: Power 0.25 kW Reduction-output speed: 50 to 200 rpm Driven by frequency converter Agitation: Anchor paddle +4 articulated PTFE scrapers Double direction of rotation Slow central movement of counter agitation: Motor: Power 0.25 kW Gearbox - output speed: 80 to 419 RPM Driven by frequency converter Agitation: 3 streamlined three-blade turbines with a diameter of 120 mm A tank bottom foam concentrate type EFC 70 GMS Motor: Power 0.75kW - speed 3000 rpm Output speed: 600 to 3000 rpm Driven by frequency converter Agitation: 70mm diameter narrow slot machined rotor/stator A ta ...

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

Interlocking SCHMERSAL AZM 200 SK-1P2PA 1179990 Fmax: 2 kN Input voltage: 24 V DC 1.0 A Output voltage: 24 V DC 0.25 A used ! Dimensions: 245 x 40 x 50 mm

Interlocking SCHMERSAL AZM 170-02ZRK 24VAC/DC 1050296000 Fmin: 17 N Rated control supply voltage: 24 V DC / 24 V AC 40 - 60 Hz 2 NC Switching capacity: 230 V AC 4 A, 24 V DC 2,, 5 A New ! Dimensions ( solenoid interlock ): 90 x 85 x 30 mm Dimensions ( packaging ): 110 x 100 x 35 mm

solenoid interlock SCHMERSAL AZM 161SK-12/12RK-024 101164207 Fmax: 2 kN rated control supply voltage: 24 V DC 1.0 A Switching capacity: 230 V AC 4 A IP67 spare part for HECKERT CWK400 machining centre, among others ! used, checked ! Dimensions: 130 x 120 x 30 mm

solenoid interlock SCHMERSAL AZM 160-22yp Fmax: 2 kN Control voltage: 24 V DC 1.0 A Switching capacity: 220 V AC 2 A IP67 used, tested ! Dimensions: 130 x 120 x 30 mm

Starter, DC motor ISKRA AZF 3509 ( AZF3509 ) 0,8 kW 12 V DC Gear: Ø 25 mm, 9 teeth Flange diameter: Ø 66 / 95 x 95 mm 1x bore: Ø 8.5 mm 2x threaded hole: M8 x 1.25 hole spacing: 74 mm New ! Dimensions ( starter ): 200 x 165 x 95 mm Dimensions ( packaging ): 280 x 160 x 110 mm

solenoid interlock with actuator, safety interlock SCHMERSAL AZM 415-22ZPK AZM 415-22ZPK-M20-24VAC/DC Fmax: 3,5 kN Control voltage: 24 V AC/DC Switching capacity: 230 V AC 4 A IP67 Actuator: AZ/AZM 415-B4PS 3025301000 spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! used, tested ! Dimensions ( solenoid interlock ): 150 x 134 x 50 mm Dimensions ( actuator: ): 238 x 60 x 70 mm

solenoid interlock with actuator, safety interlock SCHMERSAL AZM 415-22ZPK AZM 415-22ZPK-M20-24VAC/DC Fmax: 3,5 kN Control voltage: 24 V AC/DC Breaking capacity: 230 V AC 4 A IP67 Actuator: AZ/AZM 415-B4PS 3025301000 Actuator is shortened in length Spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! used, tested ! Dimensions ( solenoid interlock ): 134 x 134 x 47 mm Dimensions ( actuator ): 216 x 60 x 70 mm

Interlocking SCHMERSAL AZM 161SK-12/12RK-024 1164207 Fmax: 2 kN Rated control supply voltage: 24 V AC / DC Breaking capacity: 230 V AC 4 A IP67 New ! Dimensions: 130 x 90 x 30 mm

Safety interlock SCHMERSAL AZM 161SK-12/12RKA-024 1166285 Fmax: 2 kN rated control supply voltage: 24 V AC / DC switching capacity: 230 V AC 4 A IP67 used, tested ! Dimensions: 155 x 90 x 30 mm

Magnetic interlock switch, safety interlock SCHMERSAL AZM 170-02zrka Fmax: 1 kN supply voltage: 24 V AC / DC safety contacts: 2 NC IP67 housing material: plastic without actuator ! New ! Dimensions: 90 x 85 x 30 mm

Magnetic interlock switch, safety interlock SCHMERSAL AZM 161SK-12/12rka-024 1166285 Fmax: 2 kN 3 supply voltage: 24 V AC / DC safety contacts: 2 NO contacts switching capacity: 230 V AC 4 A IP67 housing material: plastic without actuator ! used, tested ! Dimensions: 155 x 90 x 30 mm

Roller chain, drive chain -Type: AZ22521 -Weight: 2.1 kg

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 95 mm -Number: 12x available -Price: per piece

Reishauer AZA Gear Grinder The machine is in very good condition with complete equipment. It is connected to electricity and can be seen in operation. Complete documentation.

Post new Bonfiglioli Azimut gearbox 12 pcs.

MOCO AZ11 TWIN-SHAFT SHREDDER Manufacturer: MOCO Type: AZ11 Shaft length: 400 mm Dimensions: 2320 x 1000 x 1950 mm Weight: 1300 kg Installed power of main engine: 15 kW Shredding knives: 2 X 12 ROTATING BLADE (+ CLEANING BLADES) THE SYSTEM MOCO AZ 11, shredder with slow and low noise running hexagon working shafts. Low vibration and minimal maintenance, compact design, robust welded construction, low power consumption, individually replaceable cutting discs. THE ELECTRIC The control of the AC geared motor is equipped with an automatic overload-dependent reverse control. The machine can be inspected in our warehouse in Székesfehérvár-8000 Hungary. For further information please contact us.

Pressure capacity: 85t/850kN, ram stroke: 30-110mm, ram adjustability: 50mm. Documentation available.

Clean out Unit AGFA Azura C 95 year 2011 Located: Gemany Price: on request

Swivel double reel manufactured by SCHULER type AZHR 250/2Fabr. -No: 70350300/2 built in 1970Technical specifications:Max. Coil weight: 500 kgMax. Sheet width: 500 kgMax. Sheet thickness: 2.0 mmBelt speed infinitely: 0 - 30 m / min.With- Sheet straightener adjustable with 3 pairs of straightening rollers- Sick light barrier- Loop control- Remote control / threader- Switch cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type AZR / H638997 built in 1988Max. Press force: 63 tStroke adjustment: 10 - 90 mmRam adjustment: 55 mmRam strokes: 70 hpM.Table size: 800 x 800 mmDrive power: 4.0 kWWith- large table- 2 damping cylinders- Two-hand release- hydraulic clutch- Additional brakeused, in first-class conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Auswascheinheit / Clean out Unit Agfa Azura C95 Year of construction 2010

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

washout Agfa Azura C 95; good condition; cleaned and tested; new infeed and medium rollers incl. Bearing; suitable for chemical-free negative plate Agfa Azura; Infeed width 200-950mm; Min. Panel length 310mm; Panel thickness 0.15-0.30mm; Inlet and outlet table. Cleaning unit Agfa Azura C 95; good condition; cleaned and checked; new infeed and middle rollers incl.bearings; used for chemfree negativ plate Agfa Azura; Einfeed width 200-950mm; Min. plate lenght 310mm; plate thikness 0,15-0,30mm; infeed aand outfeed table.

Mobile pump set built on an open skid. The pump is powered by a reliable hand-started Hatz 1D81Z diesel engine., Max yield : 51 m3/h, Max head : 30 MWK, , If you are interested in this pump, please do not hesitate to contact us., We have 4 pcs. in stock., , Throughput capacity: 51 m3/h, Motor brand: Hatz, Max. head: 30 MWK, Max dirt passag: 3400 rpm, Weight: 200 kg, , = More information =, , Year of manufacture: 2010, Applicable material: Water, Empty weight: 200 kg, Connector size: 3 Bauer, Cargo space capacity: 850 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physi ...

Shredding machine chipper - cutting width shaft 600 mm Main engine 15 kw machine very good condition Tichter 600 x 800 mm

Two Shaft Universal Shredder by H&S Scheuten GmbH in Very Good Working Order. It was overhauled and complete refurbished in 2018 by the manufacturing company H&S Scheuten GmbH. Unit Specifications: - Power 30kw - 35pcs 20mm thickness Knives with 4 hooks in good condition - Cutting Chamber 700mm X 300mm Perfect for light shredable material with a very high output. Could be used for: biomass, food recycling, packaging recycling, delumping of brittle material and many other applications.

Overview This automatic capping machine for bottles was built in 2010 by Polish manufacturer ZM Robak. The machine is used but in good working condition, being in operation during the years 2010-2015 and 2017-2018. Techn. Data Capacity 2.000 bph for 6l bottles and 38mm caps 9.000 bph for smaller formats (e.g. 250 m) Number of capping heads: 6 units Scope of Delivery Included: Cap transporter with an AROL hopper and a flat conveyor belt Full original documentation, including DTR (Technical Files) and electrical documentation, is available

Safety switch, safety switch, TZ -Type: AZM 415-22zpk -24 VDC -Protection class: IP 67 -Number: 5x available -Price: per piece -Weight per package: 1 kg

Gear pump, cold resin pump, pump for viscous substances, dosing pump for foundry technology -Drive: 1.1 kW -Speed: adjustable -Dimensions: 750/250/H550 mm -Weight: 70 kg

Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 28mm - Shaft length: 200mm - Rack length: 140 mm -Total length: 320mm -Socket diameter: 42 mm -Weight: 2kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder - Stroke: 160 mm - Piston diameter: 40 mm - Piston rod: 16 mm -Price per piece -Quantity: 2 pieces -Dimensions: 325/55 / H55 mm -Weight: 1.40 kg / piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA61240-0300 -Stroke: 300 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 3.5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PD44645-0280 -Stroke: 280 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 805/65/H65 mm -Weight: 3.6 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA60300-0050 -Stroke: 160 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 2.7 kg