vf 200 used for sale

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Max. cutting width 2080 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Column projection 150 mm - Automatic cutting angle adjustment 0.3 - 2 ° - automatic. Cutting gap adjustment - Number of hold-downs 10 pcs - Stroke rate up to 22 1/min - Front angle stop approx. - 2 pcs. front support arms approx. - mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 11 kW - Space requirement approx. W 3150 x H 2150 x D 2300 mm - Weight approx. 4.8 t

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

Puller for 200cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 213cm D: 64cm H: 180/190cmInterior dimensions: W: 203cm D: 64cmSee pictureDo we have various large pullers and pullers in stockDetails see pictures

Jelly spraying machine - is used - Manufacturer: Bakon - Model: Jelly 2000 M (G) - Year of construction 2004 - Exterior Dimensions W.: 48 cm, D.: 48 cm, H.: approx. 110 cm For details see pictures.

Rego SM 2000 Automatic Stop Machine / Stirring Machine Product description: âœ" Condition: used, tested, baker's condition âœ" Manufacturer: RMT - Rego GmbH âœ" Type: SM 2000 âœ" Year of construction: 1996 âœ" Power (kW): 1.68 âœ" Volt: 400 âœ" Amp.: 8.13 âœ" incl. 1 stainless steel kettle and 1 whisk âœ" electrically driven height-adjustable kettle Details see pictures

Baking gloves 2Â pair up to 200ËšC- max. 350ËšCProfessional gloves for the bakerBaking gloves made of plush handlesOperating temperature 200ËšC -max. 350ËšC (short-term)Weight 348g325x150mm, short cuffDetails see picture

Baking gloves 2Â pairs (4 pieces)Professional gloves for bakerOperating temperature 100ËšC -max. 200ËšC (short-term)Weight 300g450x150mm, with stiles made of linen fabricSpecial cotton fabric MittensDetails see picture

Pullers ALU for 200cm deep furnace NEWAductors made of ALUApullers for 200cm deep furnacePullers dimensions: W: 240cm D: 58cmDo we have various large pullers in stockDetails see picture 

Pullers with puller carriage for 200cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 251cm D: 64cm H: 184cmInternal dimensions: W: 243cm D: 64cm10 pieces Pullers made of ALUAductors for 200cm deep furnacePuller dimensions: B: 240cm T: 58cmSee pictureDo we have various large pullers in stockDetails see picture 

Used Tetra Pak A3 Compact Flex Filling Line – 200 ml Slim Complete Carton Filling Solution | 9,000 pph | Aseptic Packaging This used Tetra Pak A3 Compact Flex filling line is designed for the efficient filling of 200 ml Slim carton packages. The line offers a compact and reliable solution for producers of liquid food and beverage products, including dairy, juices, and still drinks. The system consists of key Tetra Pak components ensuring smooth operation from filling to final packaging. Line Configuration - Filling Machine - Machine: Tetra Pak Filling Machine - Model: A3 Compact Flex - Year of Manufacturing: 2010 - Format: 200 ml Slim - Capacity: 9,000 packages per hour - Operating Hours: 16,444 Accumulator - Machine: Tetra Pak Accumulator - Model: ACHX 10 - Year of Manufacturing: 2010 - Operating Hours: 15,021 Straw Applicator / Distributor - Machine: Tet ...

Separating clutch, adjustable gear motor, variable speed gear motor, electric motor -Spare part comes from a Heyligenstaedt type Heycop 3UN / 2000 -Rapid traverse: for lathe -Gearbox manufacturer: SEW -Motor manufacturer: SEW type DFW80K-2BS -Motor power: 0.75 kW 2760 rpm -Gear output speed: 1480 rpm -Brake and clutch: 24 V -Hollow shaft: Ø 25 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 615/350/H240 mm -Weight: 56 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 2000 mm -Length: 4000 mm -Height: 255 mm -Plate thickness: 95 mm -Plate: with support ribs -Groove width: 42 mm -Groove spacing: 700 mm -Number: 2 clamping plates available -Price: per piece -Weight: 6600 kg/piece

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick change boring bar holder: DB 2004 -Recording dimensions: see photos -Clamping diameter: 55 mm -Clamping length: 220 mm -Dimensions: 220/140/H130 mm -Weight: 9.2 kg

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick-change turning tool holder: DB 2001 -Recording dimensions: see photos -Clamping height: 60 mm -Support length: 220 mm -Number: 2x holders available -Price: per piece -Dimensions: 220/95/H180 mm -Weight: 9.3 kg/piece

Three-phase motor, electric motor -Condition: unused -Manufacturer: Aerzen Weg, Electric motor type: 200L-02 -Power: 30 kW -Speed: 2970 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Protection rating: IP55 -Number: 3x motors available -Price: per piece -Dimensions: 770/400/H510 mm -Weight: 226 kg/unit

Frequency converter, frequency converter, drive converter, controller, variable speed drive, solar cable -Manufacturer: Aurora, PV inverter unused from stock liquidation ovp -Type: PVI-2000-OUTD-DE -Max. Continuous output power: 2000 W -Price per piece -Quantity: 26 pieces -Dimensions: 420 x 310 x 144 mm -Weight: 12kg/pcs

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 200 A -AC -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 0.7 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes from: from a milling machine -Travel: approx. 1200 mm -Width: 700 mm -Length: 2000 mm -Height: 510 mm -Plate thickness: mm -Table height: mm -Plate: is solid -Groove width: mm -Dimensions: 3030/850/H510 mm -Weight: approx. 1200 kg

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: O 30 mm - Hole circle: O 115 mm (O12 mm) -Protection class: IP 54 -Number: 2x gear motors available -Price per piece -Dimensions: 520/240 / H220 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 32.5 rpm -Power: 0.75kW -Angle -Type: B5 -Diameter shaft: Ø 35 mm -Brake: 24V -Protection class: IP 65 -Number: 1x geared motors available -Price per piece -Dimensions: 560/300/H240 mm -Weight: 42kg

Roller conveyor, roller track, roller conveyor, roller conveyor, conveyor belt, roller track -Handover: in its current condition as inspected -Condition: Belt missing, geared motor present -Roller width: 640 mm -Conveyor length: 2000 mm -Roller diameter: 50 mm -Roller conveyor height: 1140 mm -Intermediate dimension at the top: 820 mm -Roller diameter at the top: 50 x 45 -Dimensions: 1100/2120/H1140 mm -Weight: 120 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer: with 1-axle turntable steering -Platform: 2000 x 1000 mm, height 525 mm -Load capacity: 3000 kg -Tires: solid rubber -Trailer coupling: for industrial trailers -Dimensions: 3515/1000/H525 mm -Weight: 264 kg

Electric chain hoist, crane, indoor crane, assembly crane, push trolley, push trolley, crane trolley, trolley running gear, crane running gear, crane trolley, trolley -Manufacturer: Unelec, electric chain hoist with powered trolley -Crane chassis: electrically driven, beam width 120 to 190 mm -Chain hoist: Type UX 200UX100 24V2 -Load capacity: 1000 kg (2000 Kg) -Main lift: 4 m/min -Chain length: 6.4 m -Transport dimension: 860/700/H340 mm -Weight: 95 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 D23 Ø 20.0 PTFE VA -Connection: DN20 PN16 -Number: 2x valve available -Price per piece -Dimension: 220/100/H90 mm -Weight: 1.4 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 A 40,0 PTFE VA -Connection: DN40 PN16 -Dimension: 260/103/H250 mm -Weight: 3,3 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Handover in the current condition as seen -Flatness: see photos (slip not included) -Clamping plate: with supporting ribs and heating device -Length: 2000mm -Width: 1510mm -Plate thickness: 60 mm -Plate: with support ribs -Transport dimension: 2000/1510/H880 mm -Weight: 1640 kg/pc

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 2500mm -Width: 2000mm -Plate thickness: 40 mm -Plate: with support ribs - Flatness: see photos (guideline not included) -Transport dimension: 2500/2000/H875 mm -Weight: 3110 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Stahl, electric chain hoist with powered chassis -Equipment: without pendant control, without own control -Crane chassis: Type SU-A 1442 110 electrically driven -Beam width 130 to max. 165 mm -Chain hoist: Type ST 2008-16/4 2/1 -Load capacity: 1500 kg -Main stroke: 8 m/min -Fine stroke: 2 m/min -Chain length: 4.5 m -Dimensions: see photo technical drawing -Transport dimensions: 1350/1030/H1000 mm -Weight: 136 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Stahl, electric chain hoist with powered chassis -Equipment: without pendant control, without own control -Crane chassis: Type SU-A 1442 110 electrically driven -Beam width 130 to max. 165 mm -Chain hoist: Type ST 2008-16/4 2/1 -Load capacity: 1500 kg -Main stroke: 8 m/min -Fine stroke: 2 m/min -Chain length: 4.5 m -Dimensions: see photo technical drawing -Transport dimensions: 1350/1030/H1000 mm -Weight: 139 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Handover in the current condition as seen -Flatness: see photos (slip not included) -Clamping plate: Steel plate on a solid base -Length: 1500mm -Width: 1200mm -Plate thickness: 42 mm -Plate: with support ribs -Transport dimension: 1500/1200/H900 mm -Weight: 750 kg

Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: shelf with roller conveyor, mobile, height-adjustable -Plate: 2000 x 1000mm, thickness 3mm -Height: 980 to 1160 mm -Cut-out: 250 x 250 mm -Steel frame: solid with castors -Total dimensions: 2000/1000/H980 mm -Weight: 90 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI -Clamp range: 35-70mm -Load capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Support roller: Support wheel from Logitrans SGL 2000V pallet stacker -Wheel size: Ø 170 mm -Quantity: 1x support roller available -Price: per piece -Dimensions: 240/155/H275 mm -Weight: 14 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel -Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2 -Type: A20B-2002-052 MES-1A -Extension module: Type: A03B-0815-C001 4 pcs. -Dimensions: 150/110/H30 mm -Weight: 0.2 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with solid base frame -Length: 3000 mm -Width: 2000 mm -Plate: with support ribs -Groove width: 28 mm -Groove spacing: 200 mm -Dimensions total: 3000/2000/H800 mm -Weight: 4500 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering -Platform: 2000/990/H390 mm -Load capacity: 3.3 t -Tires: solid rubber -Number: 2x transport trolleys available -Price per piece -Transport dimensions: 3395/1200/H1380 mm -Weight: 340 kg/pc.

Platform trucks, transport trucks, heavy-duty trucks, table trucks, assembly trucks, industrial trailers, container dollies, double turntable steering, heavy-duty trailers -Heavy-duty transport vehicle: industrial trailer with 2-axle steering -Platform: 2000/980/H400 mm -Stakes height: 1400 mm (welded) -Load capacity: 3.3 t -Tires: solid rubber -Number: 3x trolley available, 1x. with damaged tire see photo (discount) -Price per piece -Total dimensions: 3600/1200/H1400 mm -Weight: 370 kg/pc.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with turntable steering -Platform: 2000/1140/H505 mm, dimensions see photo technical drawing -Load capacity: 2 t -Tires: solid rubber -Number: 2x transport trolleys available -Price per piece -Total dimensions: 3060/1140/H610 mm -Weight: 220 kg/pc.

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargotrailers -Manufacturer: Bartels, heavy-duty transport truck industrial trailer type RP -Platform: 2000/1000/H340 mm -Load capacity: approx. 2000 kg -Tires: solid rubber -Own weight: 70 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Manufacturer: Kraft, heavy-duty transport truck industrial trailer with turntable steering -Platform: 2000/1000/H520 mm -Load capacity: 3000 kg -Tires: solid rubber -Total dimensions: 3410/1000/H520 mm -Weight: 200kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer -Manufacturer: KTS, Heavy-duty transport wagon industrial trailer type DSL with 1-axle turntable steering Type: DSL -Platform: 2000/1000/H610 mm -Load capacity: max. 5000 kg -Tires: Solid rubber -Overall dimensions: 3560/1000/H610 mm -Empty weight: 300 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle industrial trailer type DSL with 1-axle turntable steering Type: DSL -Platform: 2000/1115/H610 mm, dimensions see photo technical drawing -Range height: 1400 mm (welded) -Load capacity: max. 5000 kg -Tires: solid rubber -Transport dimensions: 3620/1115/H1540 mm -Own weight: 440 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt -Manufacturer: IMEC, conveyor belt conveyor belt housing VA with adjustable guide rails -Type: ST 340X2000 -Speed: Drive shaft 290 rpm -Conveyor belt rollers: Ø21 x 340 mm -Conveyor belt length: 2000 mm -Drive: ABB 0.37 kW -Total dimensions: 2010/500/H980 mm -Weight: 85 kg

Electric chain hoist, crane, hall crane, assembly crane, hand trolley, rolling trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley -Manufacturer: Konecranes, electric chain hoist with chassis -Chain hoist: Type XN16 2004 B2 load capacity 1250 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Chain length: 4.65 m -Crane chassis: beam width max. 255 mm -Dimensions: see photo technical. drawing -Transport dimensions: 1200/800/H440 mm -Weight: 173 kg