vertikal used for sale

Universal mixer Volume: 400 ltr. Material : areas in stainless steel that are in contact with the product; Main drive: 18 / 22 KW, 1500 - 3000 rpm; Bucket speed: 70 - 140 rpm; 1 x knife head, Knife head motor: 3/4 KW, 1500 - 3000 rpm; Operating pressure: 4 - 6 kg / cm2, max. Pressure: 10 kg / cm2. --> With base; --> 2 identical mixers in stock.

x-travel: 2100 mm y-travel: 720 mm z-travel: 600 mm spindle taper: SK 40 turning speeds: 30 - 8000 U/min no. of workpieces in the magazine: 30 Stück table surface area: 2800 x 650 mm table load: 2500 kg table height over floor: 900 mm rapid travel x/y/z: 30 m/min feed speeds: X/Y/Z 0 / 30000 mm/min total power requirement: 25 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 5500 x 3400 x 3100 mm CNC traveling column machining center Hedelius Furnishing: - HEIDENHAIN control TNC426 - chip conveyor - Coolant system 350 / 2.5 bar - Working area hood Machining values: - max. milling capacity: 600cm³/min - max. drilling Ø: 44 mm - max. thread Ø: M30 operating hours: - control on = 68283 hours - machine on = 67782 hours - program run = 20891 hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technische Daten: - Schnittlänge horizontal 5100 mm - Schnitthöhe vertikal 2100 mm - Schnitttiefe 50 mm - Sägeblattdurchmesser 250 x 30 mm - Vorritzsägeblatt 125 x 30 mm - Drehzahl Hauptsägeblatt 5800 Upm - Drehzahl Ritzsägeblatt 7800 Upm - Motor 3,0 kW / 400 V - Absaugstutzen 100 mm - verwindungsfreies, freistehendes Maschinengestell - Aufstellmaße L=6530,B=1150, H=2980 mm - Gewicht 900 kg inklusive: - CLAMPING SYSTEM Durch das Klemmsystem werden Plattenmaterialien unten besäumt und auch von unten aufgeteilt. Durch das Anheben der Plattenmaterialien ist es möglich diese aufzuteilen ohne Plattenstreifen von der Maschine abzunehmen, zwischen zulagern und wieder aufzunehmen. - Hauptsägerblatt 250x3,2x30 mm Z 80 TF - Vorritzaggregat mit Sägeblatt 125x30 mm Z 24 konisch - Digitale Anzeige für Horizontalschnitte - Digitale Anzeige für Vertikalschnitte - automatisch ausweichend ...

Technische Daten: - Verfahrbereich X - Achse 900 mm - Verfahrbereich Y - Achse 1300 mm - Verfahrbereich Z - Achse 180 mm - max. Werkstückabmessungen 2500 x 900 x 60 mm - min. Werkstückabmessungen 280 x 75 x 10 mm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren Delta / YASKAWA - Luftkissentisch für leichte Bewegung und Schonung der Werkstückoberfläche - Frässpindel luftgekühlt HITECO / Italy 9.0 kw, HSK 63F - Spindel Drehzahl stufenlos 24.000 Upm - Bohraggregat - Bohraggregat mit 9 Spindeln vertikal + 6 Spindeln horizontal + Nutsägeaggregat - Verfahrgeschwindigkeit X - Achse 25 m/min - Verfahrgeschwindigkeit Y - Achse 45 m/min - Verfahrgeschwindigkeit Z - Achse 25 m/min - Steuerung OSAY / Italy - Schnittstelle Ethernet/USB/CompactFlash Card - Werkstückpositionierung, pneumatisch absenkbare Ansch ...

Technische Daten: - Schnittlänge horizontal 4100 mm - Schnitthöhe vertikal 2200 mm - Schnitttiefe 60 mm - Sägeblattdurchmesser 250 x 30 mm - Drehzahl Hauptsägeblatt 5800 Upm - Drehzahl Ritzsägeblatt 7800 Upm - Motor 3,0 kW / 400 V - Absaugstutzen 100 mm - verwindungsfreies, freistehendes Maschinengestell - Aufstellmaße L=5000,B=1150, H=2980 mm - Gewicht 665 kg inklusiv: - Vorritzaggregat - automatisch ausweichender Lattenrost - Transportrollen - durchgehende Kleinteilauflage - Streifenanschlag

Technische Daten: - Schnittlänge horizontal 4100 mm - Schnitthöhe vertikal 2200 mm - Schnitttiefe 40 mm - Sägeblattdurchmesser 250 x 30 mm - Drehzahl Hauptsägeblatt 5800 Upm - Drehzahl Ritzsägeblatt 7800 Upm - Motor 3,0 kW / 400 V - Absaugstutzen 100 mm - verwindungsfreies, freistehendes Maschinengestell - Aufstellmaße L=5000,B=1150, H=2980 mm - Gewicht 665 kg inklusiv: - Vorritzaggregat - Digitale Anzeige für Horizontalschnitte - Digitale Anzeige für Vertikalschnitte - automatisch ausweichender Lattenrost - Transportrollen - durchgehende Kleinteilauflage - Streifenanschlag

Technische Daten: - Schnittlänge horizontal 5100 mm - Schnitthöhe vertikal 2200 mm - Schnitttiefe 60 mm - Sägeblattdurchmesser 250 x 30 mm - Drehzahl Hauptsägeblatt 5800 Upm - Drehzahl Ritzsägeblatt 7800 Upm - Motor 3,0 kW / 400 V - Absaugstutzen 100 mm - verwindungsfreies, freistehendes Maschinengestell - Aufstellmaße L=6000,B=1150, H=2980 mm - Gewicht 800 kg inklusiv: - Vorritzaggregat - Hauptsägerblatt 250x3,2x30 mm Z 80 TF - Vorritzaggregat mit Sägeblatt 125x30 mm Z 24 konisch - automatisch ausweichender Lattenrost - Transportrollen - durchgehende Kleinteilauflage - Streifenanschlag

Technische Daten: - Schnittlänge horizontal 5100 mm - Schnitthöhe vertikal 2200 mm - Schnitttiefe 60 mm - Sägeblattdurchmesser 250 x 30 mm - Drehzahl Hauptsägeblatt 5800 Upm - Drehzahl Ritzsägeblatt 7800 Upm - Motor 3,0 kW / 400 V - Absaugstutzen 100 mm - verwindungsfreies, freistehendes Maschinengestell - Aufstellmaße L=6000,B=1150, H=2980 mm - Gewicht 800 kg inklusiv: - Vorritzaggregat - Hauptsägerblatt 250x3,2x30 mm Z 80 TF - Vorritzaggregat mit Sägeblatt 125x30 mm Z 24 konisch - Digitale Anzeige für Horizontalschnitte - Digitale Anzeige für Vertikalschnitte - automatisch ausweichender Lattenrost - Transportrollen - durchgehende Kleinteilauflage - Streifenanschlag

(with hydraulical width changer, year 2004) Cuting width 760 mm uting high 710 mm Stroke 500 mm With hydraulical width changer, year 2004 Log feeding, outfeed splitter guide. Clamping and auxiliary carriages. Top Machine in best contition

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642

Table diameter 2,000 mm Max. Turning diameter 2,150 mm Turning height 1450 mm Table speed 3-140 rpm Max. weight of the workpiece 12000 kg Milling spindle: Maximum speed 2,000 rpm Milling spindle Motor power 22 kW Total weight of the machine approx. 34,000 kg Machine complete with: C-axis: 360,000° Milling spindle 22 KW Tool changer 16 positions Tool changer for milling tools ISO 50 16 positions Complete cladding Conveyor Complete cooling system with filtration

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg

- Siemens Sinumerik control - Chip conveyors - Coolant system - Built in 2002 Technical data - Circulation diameter: 235 mm Sledge path: - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - • in the front bearing: 90 mm - Spindle head with short cone DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated into the spindle box - Rated power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Rated speed: 1400 rpm - Maximum speed: 6500 rpm - Travel speed Z-axis: max. 30 m/min - Travel speed X-axis: max. 60 m/min

Main data Direct main drive -maximum diameter to be processed mm. 2630 -plate diameter mm. 2500 -plat speed rpm. 0.1-60 -vertical stroke of the left HEAD Z1 mm 1,100 -vertical stroke of the right HEAD turret Z2 mm 570 -working speed X1-sled left mm./min. 1-6000 - working feed rate X2-right sledge mm./min. 1-6000 - working feedrate Z1 - left slide mm./min. 1-6000 - working feed speed Z2-right slide mm./min. 1-6000 - fast forward speed - X1, X2, Z1 and Z2 mm./min. 8,000 - traverse travel speed mm / min 400 -main drive motor - turning Fanuc 100 kW power Nominal speed rpm 4000 - axle drive motors -Fanuc: Nominal torque Nm 22 Nominal speed rpm. 4000 Bil0rcq8 CNC FANUC 18 itB 4.PRECISION The positioning accuracy is: Positioning accuracy -axis X1,2 and Z1,2 mm 0,040 / 1000 Positioning repeatability -axis X1.2 and Z1.2 mm 0.025

3 m VTL 33 CNC 2 heads and magazines - REM SC 33 CNC 2MS Technical data: 1. Capacities - Maximum turning diameter with either Vertical Head 3300 mm - Maximum machining height under Cross Rail, at least 2000 mm - Maximum weight of the workpiece 20 tons 2. Table - Table diameter 3000 mm - Speed (inf. Variable) 1- 110 RPM - Main motor drive (AC) 100 KW - 4 jaw chuck with reversible jaws 3. Vertical Heads - Straight Ram vertical travel (250X250 mm cross section) 1300 mm - Horizontal and Vertical travel by means of 10 mm pitch ball screws 4. Cross Rail - Vertical Travel 2000 mm - Cross Rail elevating motor 7.5 KW AC 5. Feeds - Feed ranges 0.1 – 5 mm/rev - Rapid traverse feed 8000 mm/min 6. Overall Sizes Miwie7iv - Dimensions (approx.) L x W x H 6600 x 5.300 x 5.400 mm - Weight (approximate) 60 tons GEOMETRICAL TESTS (ISO 3655, ISO 230 ...

Heavy Duty 1 column Vertical Lathe UMARO SCM 60/100 Technical Specifications: Faceplate diameter: 4770mm Max. turning diameter: 6300mm Max. height of workpiece: 3500mm CNC Control Max. workpiece weight: 150 tons

Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 kW CROSS RAIL: Cross rail vertical travel: 2500 mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 250 x 250 mm Travel on Z axis: 1600 Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM WEIGHT OF MACHINE TOOL: 180000 kg OVERALL DIMENSION OF MACHINE TOOL: – Length x Width x Height: 13000 x 16000 x 10500 mm

CNC Vertical Lathe IM Roman, UMARO w/ 2500mm dia Technical Data: Faceplate diameter: 2500mm Max. turning diameter: 2650mm Max. height of workpiece: 1900mm CNC Control Max. workpiece weight: 15 tons

Vertical lathe with self-loader Turning diameter 420 mm with 5-fold drilling unit siemens 840 Year of construction 2000

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

Vertical CNC Lathe Manufacturer EMAG Type VL2 Y Year of construction 2015 Control Fanuc max turning diameter 100mm turning height 150mm Chuck diameter 160mm Y-axis 12 x BMT 55Tool carrier unit for driven tools Circumferential workpiece conveyor belt 27 pcs Coolant supply 15bar Conveyor Workpiece measurement Machine is connected to another Emag VL2 Machine is in TOP condition

Vertical CNC Lathe Manufacturer EMAG Type VL2 Y Year of construction 2016 Control Fanuc max turning diameter 100mm turning height 150mm Chuck diameter 160mm 12 x BMT 55Tool carrier unit for driven tools Circumferential workpiece conveyor belt 27 pcs Coolant supply 15bar Conveyor Workpiece measurement Machine is connected to another Emag VL2 Machine is in TOP condition

Dorries Model SD250 Vertical Boring Mill/ Turret Lathe Year: 1978 Flush Floor Diameter of 4-jaw chuck: 98.5"/ 2501 MM Maximum swing, side head down: 110"/ 2794 MM Height under rail: 85"/ 2159 MM Table Load Capacity: 110,000 Lbs Cross travel of ram head: 61" Vertical travel of ram head: 42" Maximum Capacity Under Tool: 70" Side head: none Table speeds: 112 RPM Variable Main drive motor: 75 HP Current Electrical Arrangement: 480/3/60 ¯ Complete With: 98" 4 Jaw Chuck (1) Swiveling Ram Head (1) 5 Position Swiveling Turret Head Full Pendant with digital readout Baldor Variable Drive Coolant Tank Flush Floor Threading Video Available

Machining diameter 500 mm max. turning diameter 660 mm Workpiece length 300 mm ----------------------------------------------- Working axes Total stroke X-axis 1180 mm Working stroke X-axis 370 mm Working stroke z-axis 400 mm ------------------------------------------------ Electrospindle Spindle speed up to 1600 1/min Max. power 46 KW Max. torque 2517 Nm CNC control Siemens 840D Driven tool stations Coolant system Conveyor Air extraction system

Year of construction: 2011 Control Siemens 840 Dsl Rotation diam. [mm] 250 Spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 39 kW Torque (max.) 460 Nm Clamping cylinders Full clamping cylinders Workpiece clamping 3-jaw chuck, SMW autoblock, KNCS-NB-260-72 Tool carrier I: Technology turret with 12 stations Tool holder VDI 40 Tool drive 6,000 rpm, 7.5 kW, 24 Nm Tool carrier II: Technology:Drilling station with IK feed Tool holder Capto C8 General: Travel in X/Z 1,180/525 mm Rapid traverse in X/Z 60/30 m/min Equipment/accessories: Displacement measuring system directly in X/Z (glass scale) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Tool breakage monitoring ARTIS CTM Automation of circulating workpiece storage, L-type Oil mist extraction Electrostatic separator, IFS IFE2000

Vertical lathe Year : 1999 Siemens struerung

Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders

Year of construction 2008 Control system Siemens 840 D Rotational diameter. [mm] 2400 Turning length [mm] 2145 General: Year of construction 2008 Control system Siemens 840 D Turning diameter 2,400 mm Rotation height 2,145 mm (stand elevation 900 mm) Machine Table: Technology gear table, 2 stages Drive power 100 kW Torque 39,700 Nm Holding torque milling operation 44,800 Nm Speed 250 rpm Face plate diameter 2,200 mm Table load max. 17,000 kg C-axis 0.001° Drilling and milling equipment: Technology Gear Spindle Speed max. 3,000 rpm Power 37 kW Torque 1,230 Nm Tool holder Capto C8 Crossbar: Vertical travel 1,000 mm Grid spacing 100 mm Distance between milling spindle and table 2,350 mm Support: Travel X-axis +/- 1,350 mm Z-axis travel 1,500 mm Chisel slide cross-section 250 x 250 mm Immersion diameter 340 mm Rotate tool holder Capto C6 Tool Hold ...

CNC Vertical Lathe BERTHIEZ TFM 125 Numerical Command: NUM 1040 Maxi turning diameter: Ø 1550 mm Turning height: 1000 mm Vertical run of the slide: 800 mm Max turning height under crossbar: 1280 mm 2 speed ranges: 1 to 125 RPM - 1.6 to 200 RPM 4-jaws chuck Ø 1250 mm False platform diameter: Ø 1500 mm Maxi permissible weight on chuck: 10 T Motor: 22 kW Horizontal travel at right of chuck: 895 mm Horizontal travel at left of chuck: 935 mm Left coolant section: 180 x 180 mm Tool changer: non-functional Chip Conveyor Voltage: 380 V Weight: approx 20 T

CNC Vertical Lathe Make: Hüller Hille Type: VDM 120 – 11 Year of construction: 2002 Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg

Control Mazatrol Fusion 640 TN Turning diameter 180 mm Turning length 100 mm Travel X/Z 320 +560 / 280 mm Speed 7000 min-1 12-speed turret Conveyor Accessories:

Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg The machine is still energized. Viewing possible at any time by arrangement.

GENERAL Project No.: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of construction: 2018 Condition: Used machine Program run approx. (hrs.): 28,500 DESCRIPTION TURN Max. turning diameter 210 mm Max. turning length 100 mm Max. circulation diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at ED 10-40/100% 25/16 kW Max. torque main spindle at ED 10-40/100% 200 Nm Spindle diameter in the front bearing main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z Main spindle unit 400/-/200 mm Max. rapid traverse speed in X/Y/Z Main spindle unit 60/-/30 m/min Feed force in X/Y/Z Main spindle unit 5000/-/5000 N Direct Displacement Measuring System Main Spindle Unit X/Z Full-clamping cylinder on the main spindle Rev ...

with CNC control, Fabr. SIEMENS, type: SINUMERIK 840D POWERLINE, turret with 12 tool positions, max. speed: 4000 rpm, number of axes: 3, max. circulation diameter: 300 mm, max. turning diameter: 300 mm, max. turning length: 300 mm, with a workpiece loading system, Fabr. EWAB

Type tandem with 2 workrooms Control: SIEMENS Sinumerik max. turning Ø: 200 mm Travels: X= 520, Z= 200 mm Revolver with 14 stations Conveyor

CNC processing centre Brand: TecnoTeam Type: Enjoy Basic 3 Achsen New machine Save your space: Standing upright means progress for human! - With a vertical CNC machine you save a lot of space: Wether for consuming material or a further machine, you have more space to use in your storage. Easy machine use: - TPA makes the use very easy, you find this software at several well-known machine brands - You see the programmed processings on a virtual display, no matter which process: if circle, bow, linear millings or drillings, - Create job lists in the CAM - Forget the calculator, the machine calculates for you. - For this software several genious tips and tricks are possible. With realiability to success: - Technoteam uses High-Quality components from well-established producers. - We modify the machine exactly to your needs: If you process massive wood, you get a stro ...

Manufacturer: FOCO Umlaufregal, Type: Umlaufregal vertikal, Year: 1992, FREETEXT1: Be-/Entsladen möglich per Hand/Gabelstapler/kran, FREETEXT2: Aufstellmass<CRLF>LBH =9800 X 5500 X 1780 mm, FREETEXT3: 15 Gondeln, FREETEXT4: Gondel Innenmasse <CRLF>LBH =4200 X 620 X 550, FREETEXT5: Tragktaft je Gondel 1500 Kg, FREETEXT6: Antrieb SEW 2 X 3 kw, Year :1992

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

P93 - used approx. 11 m³ / 11,000 litres polyester tank / GRP-tank, aboveground, vertical, on ring base, Juno-tank, in good condition. volume: approx. 11 m³ / 11,000 litres material: polyester / fiberglass diameter: approx. 1.70 m height: approx. 5.50 m Vertically standing, aboveground storage tank by manufacturer Juno. Round shape, on ring base, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is ...

Pendulum grinder, vertical grinder, swivel arm vertical grinder, surface grinder, grinder, l, surface grinder, magnetic grinder, surface grinder-vertical, cup grinder -Manufacturer:Lomefa, cup grinder -Grinding height: max. 235 mm -Grinding wheel: Ø 200 mm -Work table: 285 x 200 mm -Drive: 1.1 kW -Accessories: including grinding wheels, see photo -Total dimensions: 1160/650/H880 mm -Total weight: 208 kg

Pendulum grinder, vertical grinder, swivel arm vertical grinder, surface grinder, grinder, l, surface grinder, magnetic grinder, surface grinder-vertical, cup grinder -Manufacturer: Slijepmachinefbriek Ijmuiden, surface grinder-vertical with magnetic plate -Magnetic plate: 320 x 155 mm -Grinding height: max. 195 mm -Grinding wheel: Ø 200 mm -Coolant device -Transport dimensions: 730/555/H1690 mm -Total weight: 443 kg

Pressure reducing valve, condensate drain, valve, check valve, control valve -Condensate drain made of: stainless steel -Gestra: UNA 15v -Use: vertical -Pressure: PN25 -Connection: DN15 -Dimensions: 145/100/H200 mm -Weight: 7.1 kg

Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg

Technische Daten: - Hobelbreite 20 - 230 mm - Hobelhöhe 8 - 160 mm - min. Werkstücklänge 720 mm (einzeln) / 280 mm (bei Serie) - 6 Spindeln - Spindel FI 40 mm - Drehzahl 6800 U/min - Vorschubgeschwindigkeit stufenlos 6 - 36 m/min - Abrichtwelle, unten max. Werkzeug FI 125 mm - Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - zweite Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 108 - 200 mm - Dickenwelle, oben max. Werkzeug FI 108 - 180 mm - zweite untere Horizontalwelle max. Werkzeug FI 108 - 230 mm Spindelfolge: 1. unten 5,5 kW 2. rechte vertikal 5,5 kW 3. zweite rechte vertikal 7,5 kW 4. linke vertikal 7,5 kW 5. oben 7,5 kW 6. zweite untere 7,5 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 47,25 kW - Druckluftanschluss max. 6 bar - Absaugstutzen 6 x 150 mm - Abmessungen L=4750, B=1860, H=1760 mm - Gew ...

Technische Daten: - Hobelbreite 20 - 230 mm - Hobelhöhe 8 - 160 mm - min. Werkstücklänge 720 mm (einzeln) / 280 mm (bei Serie) - 7 Spindeln - Spindel FI 40 mm - Drehzahl 6800 U/min - Vorschubgeschwindigkeit stufenlos 6 - 36 m/min - Abrichtwelle, unten max. Werkzeug FI 125 mm - Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - zweite Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 108 - 200 mm - obere Horizontalwelle max. Werkzeug FI 108 - 180 mm - zweite obere Horizontalwelle max. Werkzeug FI 108 - 180 mm - untere Horizontalwelle max. Werkzeug FI 108 - 230 mm Spindelfolge: 1. unten 5,5 kW 2. rechte vertikal 5,5 kW 3. zweite rechte vertikal 7,5 kW 4. linke vertikal 7,5 kW 5. oben 7,5 kW 6. zweite obere 7,5 kW 7. untere 7,5 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 54,75 kW - Druckluftanschluss max. 6 ba ...

Manufacturer: Arminius Leistenfräs und Schleifmaschine 2 Maschine verstellbares Bett, Type: SP 39, Year: 1994, Monting of the machine: 2 X Fräsen/2 X vertikal schleifen/2X horizontalschleifen/Radiusshleifen schwenkbar/2 Radius schleifen oben/unten, Sanding width mm: 120, Sanding hight mm: 120, Sanding belts horizontal/bottom: keine, Sanding belts horizontal/longitudinal: 5, Sanding belts horizontal/traverse: no, Number of sanding belts left: 6, Sanding belts on right, qty.: 6, Bandschleifaggregate Stk.: 10, Bürstenaggregate Stck.: no, Right side units Qty.: linke und rechte Seite sind gleich Bestückt, Unit 1 tiltable: Zerspaner, Unit 2 slewable: rechts und links Profifräse, Aggregat 2 kW: ca. 2,2 , Unit 3 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 3 kW: 1,5, Unit 4 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 4 kW ...