vertical used for sale

This 4-axis MORI SEIKI DuraVertical 5080 was manufactured in 2008. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 500 mm. The machine has a robust weight of 6100 kg and includes a rotary/indexing table, which has been unused since new. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5080 vertical machining centre we have for sale. Contact us for further details.

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details.

This 3-axis MIKRON VCP 800 was manufactured in 2003. It features an X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a Heidenhain iTNC 530 control and a high-speed spindle capable of reaching up to 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the MIKRON VCP 800 vertical machining centre we have for sale. Contact us for further details.

This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details.

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details.

This 3-axis Makino V55-A15 was manufactured in 1998. It features a spindle speed of 15,000 rpm and offers a generous X-axis travel of 900 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. The table dimensions are 1000 x 500 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the Makino V55-A15 vertical machining centre we have for sale. Contact us for further details.

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine.

ID3858 Furukawa HCR1450 ED year/Baujahr 2015 10.150 hours/hours 15.3 t Blast-hole drill rig; new engine installed approx. 1,490 hours ago; old engine—still functional—included (high crankcase pressure due to worn piston rings); includes a pallet of spare parts (5 hammer shanks, filters, GT51 drill rods, drill bits, etc.); additional drill rods available optionally Blast hole drilling rig, new engine approx. 1,490 hours ago, old engine – still functional is included (increased crankcase pressure = piston rings worn), incl. pallet with spare parts (5 hammer insertion ends, filter, GT51 drill pipe, drill bits etc.), optionally more drill pipe available

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

Simultaneous 5-axis design - Control system SIEMENS 840 D SL - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - Tool holder HSK 63A - High-pressure system IKZ 40 bar - Probe 3D Weight 8,100 kg

This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details.

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details.

Inv. Num. : 7531 Type: VMC 750 Producer: MAS Created: 2000 Parameters: Control system: VICKERS ACRAMATIC A2100 Work table length: 1000 mm Work table width: 500 mm X-axis travel: 750 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Machine weight: 4000 kg Equipment: Technical Documentation

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

This 4-axis FANUC ROBODRILL α-D21LiB was manufactured in 2018. It features an impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a robust clamping area of 850 × 410 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D21LiB vertical machining centre we have for sale. Contact us for further details.

GRP tank, upright Volume: 23,000 l Dimensions: Ø 2.00 m × 7.50 m high Spout: DN80

Conventional Vertical Lathe O-M TMS2-18/40 Made in 1975. Table size: 1800mm Max swing: 4000mm Max turning height: 1500mm Condition Under power.

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Inv. Num. : 7562 Type: VF2 Produzent: HAAS Erzeugt: 2006 Parametern: Steuerungssystem: HAAS AUTOMATION Arbeitstischlänge: 914 mm Arbeitstischbreite: 356 mm Maximale Tischbelastung (gleichmäßig): 1361 kg Verfahrwege X-Achse: 762 mm Verfahrwege Y-Achse: 406 mm Verfahrwege Z-Achse: 508 mm Spindelleistung: 22.4 kW Maschinengewicht: 3539 kg

Key data: 350 mm, 500 mm, 450 mm

CNC-controlled precision vertical slotting machine with four CNC axes and an electronic control of the rotary cutting table with a positioning accuracy of 0.001°. A machine for the efficient production of: - Fitting grooves (also conical grooves) -Splines - Internal and external gears -Racks CNC control with 10" color screen and touch screen software for roughing – finishing – fine finishing (This achieves surfaces of the highest possible grades.) Lifting range of the push carriage can be programmed up to 350 mm Push-slide speeds 0 to 80 strokes/min infinitely variable Push-slide swivel range +/- 20° Largest workpiece height 640 mm Projection 500 mm Round table size 450 mm Bore in the round cutting table Ø 135 mm Maximum table load 1,250 kg Table travels longitudinal and transverse – 340 x 340 mm Power transmission of the X + Y axis by precision ball screw ...

Key data: 1020 mm, 610 mm, 610 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1200x600mm Axis X ... 1020mm Axis Y ... 610mm Axis Z ... 610mm Spindle speed ... 10-12000 rpm Controlled axes... 3 cooling ... 20bar SK 40 Max. workpiece weight ... 500kg Main engine power ... 22kW Rapid traverse ... 40,40,36m/min Magazine spaces ... 30 Machine weight ... 6970kg L x W x H ... 2920x2820x2860mm The machine is in good condition, possible to test under power.

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This 4-axis HAAS VF-3SS was manufactured in 2017. It features an X-axis travel of 1016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a table size of 1219 x 457 mm and can support a maximum part weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3SS vertical machining centre we have for sale. Contact us for further details.

This 3-axis VICTOR TAICHUNG Vcenter-102E was manufactured in 2019. It features impressive axis travels of 1020 mm in X, 600 mm in Y, and 560 mm in Z, along with a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the VICTOR TAICHUNG Vcenter-102E vertical machining centre we have for sale. Contact us for further details.

Key data: 800 , 400 , 400

CNC controller: Yasnac Axes X-axis travel mm: 800 Y-axis travel mm: 400 Z-axis travel mm: 400 Rapid traverse m/min: 36 Worktable Table dimensions mm: 800 x 400 Spindle Spindle speed rpm: 10.000 Tool system Tool holder: BT-40 Tool magazine slots: 20 Equipment Chip conveyor High pressure pump Rated power kVA: 58 Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447

A used sinker EDM machine is offered for sale. Equipped with F 100 filtration system. Inspection possible by appointment.

Vertical turning machine manufactured in 2007. This DOOSAN PUMA V400-2SP features a maximum turning diameter of 400 mm and a turning height of 400 mm. It includes dual 8/12-station turrets and operates with a FANUC Series 18i-TB CNC control. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA V400-2SP machine we have for sale. Contact us for further details regarding this machine.

Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg

Inv. Num. : 6634 Type: MGH 250 Produzent: MECTRON Erzeugt: 2010 Parametern: Steuerungssystem: SINUMERIK 840DSL Arbeitstischlänge: 400 mm Arbeitstischbreite: 300 mm Maximale Tischbelastung (gleichmäßig): 80 kg Maximale Vertikalspindeldrehzahl: 30000 1/min Minimaler Abstand zwischen der Spindel und dem Tisch: 100 mm Maximaler Abstand zwischen der Spindel und dem Tisch: 350 mm Verfahrwege X-Achse: 250 mm Verfahrwege Y-Achse: 250 mm Verfahrwege Z-Achse: 250 mm Maximale Vorschubgeschwindigkeit Achse X: 36 m/min Maximale Vorschubgeschwindigkeit Achse Y: 36 m/min Maximale Vorschubgeschwindigkeit Achse Z: 36 m/min Kegel: HSK E 25 Anzahl der Achsen: 3 Stücke Maschinenhöhe: 1070 mm Maschinenlänge: 1660 mm Maschinenbreite: 1800 mm Maschinengewicht: 1850 kg Ausstattung: Kühler OilMatic C750 Transformator

Offer 24157 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Stepless belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - Saw blade welder IDEAL -Lighting

This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details.

Table clamping surface: 765 x 400 mm Travel x/y/z: 650/410/510 mm Spindle holder: BT 40 small/large distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8000 rpm Number of tool positions: 20 pieces Feeds: approx. 30 m/min Rapid traverse: approx. 30 m/min electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2300 x 2100 x 2650 mm Weight: 4000 kg

This 3-axis DMG DMU60 Monoblock was manufactured in 2014. It features a Heidenhain iTNC 530 control unit, ensuring precision and reliability. The machine operates at a voltage of 400 V and has a power rating of 41 kVA. If you are looking to get high-quality machining capabilities, consider the DMG DMU60 Monoblock vertical machining centre we have for sale. Contact us for further details.

This 3-axis Enshu ES400 was manufactured in 2006. It features a spindle speed of 13,000 rpm and a tool magazine capacity of 20 tools plus 1 in spindle. The machine has an X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 380 mm. If you are looking to get high-quality milling capabilities, consider the Enshu ES400 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details.

Inv. Num. : 7661 Type: 605 CNC Producer: Witech Created: 2005 Parameters: Control system: NUM 1040 Work table length: 220 mm Work table width: 210 mm X-axis travel: 330 mm Y-axis travel: 150 mm Z-axis travel: 150 mm Machine height: 2300 mm Machine length: 1650 mm Machine width: 1730 mm Machine weight: 750 kg Equipment: 4 Tool Holders Pump Spindle temperature device Heidenhain Linear Measurement

A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment.

This 5-axis Hurco VC500i was manufactured in 2019. It features a robust control unit with WinMax software, ensuring efficient operation. The machine includes additional equipment such as a chip conveyor and a Spaleck finishing unit, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the Hurco VC500i vertical machining centre we have for sale. Contact us for further details.

This 3-axis Enshu ES450 was manufactured in 2001. It features an X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 460 mm. The machine is equipped with a Fanuc 16i-MB control unit and has a tool magazine capacity of 20 tools. If you are looking to get high-quality milling capabilities, consider the Enshu ES450 vertical machining centre we have for sale. Contact us for further details.

axis stroke (X,Y,Z): 550 x 300 x 425 mm Number of spindle head vertical: 0 St. Number of spindles head horizontal: 0 St. Number of tools: 0 St. Dust suction hood: --- mm Number of milling agregates: --- St. working dimensions: --- mm Year: 1998 Boring power: --- mm Speed of boring spindles: --- U/min. Speed: --- U/min. Required air-pressure: bar Diameter of the saw arbor: mm total power requirement: kw Weight: kg Dimensions (L/W/H): mm Motor output: kW Capacity: kg/h Sawing unit: Sawblade tiltable: ° Saw blade diameter: mm Control: Siemens Sinumerik The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

This 3-axis Hurco VMX42T vertical machining center was manufactured in 2007. It features a robust table size of 1,270 × 610 mm, supporting a maximum load of 1,500 kg. Equipped with a high-speed spindle capable of up to 12,000 rpm and a BT40 taper, it ensures efficient machining. The machine includes a 24-tool automatic changer and rapid traverse rates of 24 m/min. Contact us for more information about this machine.