vertical mill used for sale

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cage2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Hammer Mills MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General TypeSmimo-MI-100L No.010.00.01.001 Year of construction1999 Mounted on framecheck With switchcheck With switchgear(as is) Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 °C Drive power:  ...

General SKU286M327 MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: No.:unknown, manufacturer tag is missing: Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel General Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicHosokawa AlpineMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed ...

General SKU286M326 MakeALPINE A.G./ Henco &: Co. Type:ATP200 / 4ATP: No.:unknown, manufacturer tag is missing: Year of construction+/- 2006 Mounted on framecheck Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel General LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicHosokawa AlpineMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & F ...

General SKU286M325 MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: No.:manufacturer tag is missing: Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel General Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicHosokawa AlpineMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarI ...

X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening  ...

General SKU256Y259 LocationBarneveld CEcheck Main Features MaterialMild steel Volume0.25 Ltr. Motor1.5 KW Specified Features - Ball mill Ball millcheck CapacityMax 4 x 250 ml Drum sizesDia. 75x65 mm Motor1.1kW, 230V Speed30-400 rpm With ballscheck MaterialTool steel 1.2080 General MakeRetsch Haan Serial6260312 TypePM 4000 Year of construction1996 With switchcheck Floorspace0,83x0,70 m Total height1,20 m Weight350 kgBall millsSpicesCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsRetsch HaanMills > Ball millsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal f ...

milling machine, year 1990. Used machine. More info & price on IndustrialBuyer.

ATEX basket mill from the NTD brand model UVI MILL-CN10 VE ATEX. Features: Maximum pressure 8 kg/cm2 Maximum temperature 50 ºC Maximum speed: 750 rpm Maximum shaft height 1000 mm Cowless diameter 248 mm Motor 7.5 kw 1460 rpm 50 hz 400 v Technical characteristics Model UVI MILL-CN 10 VE ATEX Year of manufacture 2017 Motor 7.5 kw 1460 rpm 50 hz 400 v Transportation Information Length 1560 mm Width 700 mm Height 1660 mm Weight 500 Kg Documentation CE Certificate Maintenance Manual Operation Manual Plans Electrical diagrams In your state

Key data: 250 mm, 600 mm

24” wide x 10” diam. Two Roll Mill Emergency stop button at the front of the machine & a guard above the roller

Key data: 150 mm, 300 mm

300mm (12”) wide x 150mm (6”) diam Two Roll Lab Mill Manufacturer: Francis Shaw Even and friction Emergency stop Hand nips Oil fill lubrication Suitable for steam heating / water cooling rolls Tray fitted beneath Mills Rolls Compact

General SKU313Y647 MakeRetsch TypePM400 No.TU 2145 Year of constructionunknown LocationBarneveld Main Features MaterialCeramic Volume0.4 Ltr. Motor1.5 KW Specified Features - Ball mill Ball millcheck Capacity4 x 400 ml Drum sizesDia. 80x80mm InletDia. 60mm Motor1,5kW, 230v Speed30-400 rpm MaterialCeramic General Mounted on wheelscheck With switchcheck Floorspace0,83x0,70 m Total height1,20 m Weight250 kgBall millsSpicesCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsRetschMills > Ball millsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > F ...

Completely food-safe stainless steel construction for surfaces that come into contact with the product.Blades/hammers → blunt hammer elements on both sides.Cooling → water cooling integrated into the system. Machine as good as new (unused)

Stainless steel Jet Mill. About 3 legs. Features: Vertical inner diameter 77 mm Lower outlet diameter 52 mm inside 72 mm outer diameter junction outlet. Transportation Information Width 550 mm Height 1050 mm No documentation In your state

Mill of the brand FITZ MILL model D. Stainless steel with iron structure with 4 wheels. Motor 6.8 kw 1430 rpm 50 hz 390 v NW100 bottom outlet Maximum top entry 250 mm Top inlets 115 mm Transportation Information Length 1400 mm Width 1300 mm Height 1700 mm No documentation In your state

General SKU297Y562 MakeCondux TypeCGS32/V-DSF No.93102312 Year of construction1994 Main Features Motor4 KW Inlet diameter100 mm Specified Features - Jet Mill Rotor sizeø 170 mm Grinding room sizeø 340 mm Housing dimensions ø 340 mm InletDN 100 Motor4,0 kW (400 V 2900 rpm) Jet Mills MaterialStainless steel 1.4571 (316Ti) General Mounted on framecheck LocationBarneveld Floor space1,30 x 1,20 m Total height2,00 m Weight580 kg Extra information Extra SpecificationsOutput DN80 Jet MillsConduxMills > Jet MillsBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Milling machine Emco PCMill 50

GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan) TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2 Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45° Tool magazine 25 placesTool magazine 25 places (su ...

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm

This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details.

This 3-axis KNUTH X-Mill 640 was manufactured in 2015. It features a travel of 640 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a Siemens 828D control unit and a 16-fold double-arm tool changer. If you are looking to get high-quality machining capabilities, consider the KNUTH X-Mill 640 vertical machining centre we have for sale. Contact us for further details.

This 5-axis CHIRON MILL FX 1250 was manufactured in 2015. It has a mass of 9700 kg and operates at a voltage of 400 V with a full load current of 63 A. If you are looking to get high-quality machining capabilities, consider the CHIRON MILL FX 1250 vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details.

This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details.

This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details.

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

This 3-axis DMG MORI MILLTAP 700 was manufactured in 2013. It features a spindle speed of 24,000 rpm and a travel distance of 700 mm in the X-axis, 420 mm in the Y-axis, and 380 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the DMG MORI MILLTAP 700 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS Mini Mill was manufactured in 2024. It features an X-axis travel of 406 mm, Y-axis travel of 356 mm, and Z-axis travel of 381 mm. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details.

Control: Manufacture: SIEMENS 840D x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm table-size: 900 x 560 mm spindle turning speed range: 12000 U/min tool magazin:: 30 weight of the machine ca.: 5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details.

This 3-axis EMCO MILL E350 was manufactured in 2019, featuring advanced Siemens control for precise operations. Ideal for complex milling tasks, this vertical machining center ensures reliable performance. Consider the opportunity to buy this EMCO MILL E350 vertical machining center. Contact us for more information.

This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details.

This 3-axis MILLTRONICS RH 20 vertical machining centre was manufactured in 2014. It features a substantial table size of 1,372 mm x 508 mm and impressive X-axis travel of 1,016 mm. The machine is equipped with a 24-station automatic tool changer and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the MILLTRONICS RH 20 machine we have for sale. Contact us for further details.

This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details.

This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details.

Vertical CNC Manufacturing Center Chiron Mill 2000 Control: Heidenhain TNC 640 Year of manufacture: 2023 Internal machine no. 82 Travels: X-axis: 2,000 mm Y-axis: 895 mm Z-axis: 715 mm Clamping area: 2,600 x 910 mm Interference circle Ø: approx. 1,150 mm Mount: HSK-A63 Tool magazine: 40 – compartment Spindle speed: 50 - 12,000 rpm spindle Accessories - NC swivel head with headstock - Water-cooled motor spindle - Integrated rotary table Ø 500mm - Probe Blum TC54-10 - Coolant system KNOLL KF 400/900 - Chip conveyor KNOLL 600 K-3/4000 - 2 rinsing guns

Millipore IsoPak STS, System equipped to pack and unpack columns for Millipore K Prime Biochromatography system year of manufacturing 2000

Millipore K-Prime III Biochromatography system for cleaning and separation of proteines, biotechnology products, antibodies etc. The System is GMP-conform. floating rate 1-10 l/min, nominal pressure 7 bar, UV-H and LF Messuring after column, fraction sampler valves The System is consisting of corrosion-resistant materialials like lastic and Hastelloy-C.

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4)

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

MARCHESINI FILLING MACHINE, MODEL MI 200 D.I. Year of construction: 2011 Automatic double-channel linear filling machine for plastic tubes. A great choice for packaging cosmetic and pharmaceutical products. Usable in sterile environments. The customization allows for the maximum production flexibility. possibility of simultaneous installation of different closure systems (metal and hot air) multiple feeding options and adjustable format change via HMI OUTPUT up to 200 pieces/min PRODUCT RANGE Dosage range: 1 - 320 ml Tube height with cap: 50 - 250mm Tube diameter: 11 - 50mm ELECTRICAL CHARACTERISTICS Nominal voltage: 3x400v +N+PE Frequency: 500 Hz 6 kA 18 A OTHER CHARACTERISTICS Weight: 3800 kg

Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM

Flow monitor -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Miller TR 104 2 colors with perfector. color Control panel(Pult), 75 mil, roller and cylinder are without damage