vertical mill used for sale

Brand : Comi Pack Model : VM40 Year : 2003   Type : Vertical bagging machine Voltage : 380 / 400 Volt Hz Power : 3,7Kw Air consumption : 60 Lt/min Tube diameter : min 40 - max 120 mm Product dimensions : length: min 40 - max 280 mm Width: min 40 - max 180 mm Winding band: max 400 mm Roll diameter : max 400 mm Machine dimensions: L 1700 x W 950 x H 1620 mm 2 formats available

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

HAAS MINI MILL HE CNC machining center built in the USA in 2001 is distinguished by its incredible milling precision and accuracy, making it ideal for a wide range of applications in any production facility. Made from the highest quality raw materials, the stable, compact design with sliding doors effectively dampens the vibrations generated during machining and provides easy access to the work space. The work space is equipped with a T-slot table, a reliable high-speed spindle and a 10-position tool magazine. To minimise the need for the operator to operate the machine, all machining parameters are programmed in the intuitive HAAS CNC control, which fully automatically executes the machining cycles. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC control: HAAS - work table surface area (L x W): 914 x 305 mm ...

HAAS MINI MILL HE CNC vertical milling center was built in 2006 in the United States. This compact machine, with its emphasis on high productivity and precision milling, is ideal for any production facility, even during the most intensive challenges. Behind the sliding doors there is a large work space equipped with a T-slot table, a 10-position tool magazine and a reliable high-speed spindle. Machining programmes are created in just a few steps in the intuitive HAAS CNC controller, which performs cycles fully automatically and minimises the operator’s need to operate the machine. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC controller: HAAS - feed rates in the X/Y/Z axis: 406/305/254 mm - work table surface (L x W): 914 x 305 mm - maximum workpiece weight: 227 kg - maximum spindle rotational speed: 600 ...

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T

1 milling machine-vertical used in console version Manufacturer Reckermann Type: CONSA V Year of construction: 2001 Control: HEIDENHAIN TNC 124 X-axis: 1000mm Y axis: 370mm Z-axis: 450mm Table size: 1300 x 400 mm Spindle retainer: SK 50 Max spindle rotation: 3600 RPM

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition

Table length: 700 mm Table width: 460 mm Longitudinal X: 400 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    5459 MAKE        Deckel Maho TYPE          FP3A YOP            1991 SPECIFICATIONS X-Axis      400 mm Y-Axis      400 mm Z-Axis       400 mm Table Length       700 mm Table Width         460 mm Table load            400 Kg Spindle speeds      4000 Rpm DIMENSIONS Length       2600 mm Width         2400 mm Height        2100 mm Weight        2000 kg

No. 3701: 1 gebr. Vertical consol milling machine Fabr. HESSAPP, type HC 50 et, Bauj. 1981 with route control Heidenhain TNC 135 / Indramat Arb.-Ber.: 600 x 350 x 500 mm, drive power: 2.3 kW Accessories: Table area 1180 x 330 mm Other: Speed range 70 - 6000 rpm

Table length: 500 mm Table width: 400 mm Longitudinal X: 510 mm Cross Y: 510 mm Vertical Z: 460 mm CNC Brand: Mazatrol CNC Model: 640 M 5 X MACH-id  3538 MAKE  Mazak TYPE  Variaxis 500 - 5X YEAR  2007 SPECIFICATIONS   X - Travel  510 mm Y - Travel  510 mm Z - Travel  460 mm Controll  Mazatrol 640M 5X Table Length x Width  500 x 400 mm Table load in kG  300 Kg Spindle Taper  Bt 40   kW power on spindle  22 kW Spindle speeds / ranges   12000 Rpm ATC tool changer  40 Coolant true spindle / Bar  Yes, 20 Bar Number off controlled axis 5  

Table length: 1240 mm Table width: 550 mm Longitudinal X: 1000 mm Cross Y: 508 mm Vertical Z: 460 mm CNC Brand: Mazatrol CNC Model: Mazatrol M-32 X - Travel:              1000mm Y - Travel:              508mm Z - Travel:              460mm Table Length:            1240mm Table Width:             550mm Table load:              800 Spindle Taper:           40ISO/Bt/Mk Power on spindle:        18,5kW Speeds / ranges:         4000Rpm ATC / revolver:          30 Number of controlled axis:3 Chip conveyor:           Yes Coolantsystem:      ...

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: Sk40 collet diameter: nein turning speed range: 300 bis 3000 U/min drive motor: 15 kW weight of the machine ca.: 0,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1000 mm z-travel: 800 mm spindle turning speed range: 4 Stufen von spindle turning speed range: 20 - 3150 U/min spindle taper: SK 60 + SK 50 milling head -swivable +/-: 45 ° copying travel - horizontal/cross: 300 mm copying travel face: 200 mm distance spindle /table: 200 bis 1000 mm distance spindle center to column: 1120 mm table surface area: 4400 x 1000 mm table load capacity: 8000 kp total power requirement: 30 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 7,5 x 5,0 x 4,4 m Machine is in an excellent condition, continuously maintained by the manufacturer • Control D + R, extended with HSM • DROOP & REIN - copy control type kc • HF spindle TDM HK 12-02, 15000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

tool adaptor: ISO 40 Torque: 200 Nm turning speed range: 1800 U/min drive motor: 3,7 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: 22 kW tool adaptor: ISO 50 Torque: 1000 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: 5,5 kW tool adaptor: ISO 40 Torque: 290 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: max. 44 kW tool adaptor: ISO 50 distance spindle - column: 460 mm Torque: 3180 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min tool adaptor: ISO 40 - 50 spindle taper: DIN 2080 / M16 drive motor: 7,5 PS quill stroke: 65 - 75 mm quill stroke: 65 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: 30 kW tool adaptor: ISO 50 Torque: 1500 Nm Quick tool unclamping device (hidromechanic), on both spindles Tool taper DIN 69871 - Pull stud DIN 69872 B, on both spindles General dimensions as per the attached drawing VXZ-3900-36-DG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: ISO 40 - 50 turning speed range: 1800 - 4000 U/min drive motor: 5 - 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: 14,7 kW tool adaptor: ISO 50 Torque: 780 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm

CME FS2 Vertical CNC Milling Machine X : 2000 mm Y : 1000 mm Z : 1000 mm Working hour : 8000 Machine is in excellent condition

Table length: 800 mm Table width: 500 mm Longitudinal X: 630 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: Heidenhain CNC Model: TNC 430 Make Deckel Maho 63 V Type Deckel Maho Year DMC 63 V Deckel maho DMC 63V TNC 430 Table length (mm) 800 Table width (mm) 500 Longitudinal X (mm)X = 630Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 CNC TNC 430 Iso 40 / 8000 / 10 kW ATC 24  Positions HeidenHain TNC 430  

Table length: 1700 mm Table width: 470 mm Longitudinal X: 1400 mm Cross Y: 600 mm Vertical Z: 590 mm CNC Brand: Heidenhain CNC Model: TNC 410 Make Ki Heung Combi Type Combi U3Z Year 05 / 2000 Ki heung comi milling TNC 410 PA freesmachine Table length (mm)L = 1.700 Table width (mm)W = 470 Longitudinal X (mm)X = 1.400 Cross Y (mm)Y = 600 Vertical Z (mm)Z = 590 Iso 50/2500/11kWCNC TNC 410 PAHR 410 handwheel2 doors front side Universal milling head Full set documentation  

Table length: 1750 mm Table width: 450 mm Longitudinal X: 1340 mm Cross Y: 500 mm Vertical Z: 600 mm Make MRF 135 Type Atalaya Year 1989 Conventionel Table length (mm) 1750 Table width (mm) 450 Longitudinal X (mm)X = 1.340 Cross Y (mm)Y = 500 Vertical Z (mm) Z = 600 iso 50 / 20 Hp / 1700 3 Axis FAGOR Dro Huron type milling head  

Lagun Milling Machine, 5CNC. Heidenhein Control 355. In function, ready to collect. With the dicumentation of the machine and the control.

Vertical turret milling machine Manufacturer: LAGUN Model: FTV 5-SP Year of manufacture: 2008 Few working hours, machine in condition like new

No. 5100: 1 gebr. Vertical milling machine Fabr. FRITZ WERNER, type FV 2

Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg

throat: 276 mm tool adaptor: 40 ISO power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DECKEL MAHO DMU 60 T CNC vertical machining centre was built in Germany in 1999. The machine performs precision machining of workpieces weighing up to 350 kg, in three axes with feeds of 600 mm (X axis), 525 mm (Y axis) and 500 mm (Z axis). Workpieces are placed on a tilting rotary table with the dimensions (L x W): 900 x 500 mm and they may also be machined horizontally, thanks to the mounted detachable milling head The high-performance spindle of the milling centre rotating at a speed of 12000 rpm, together with the advanced HEIDENHAIN Mill+ numerical control, guarantee excellent precision, quality and a significant reduction in machining time. The milling centre’s tool magazine has a capacity of 25 tools and provides tool changes in a very short time. The CNC milling machine is also equipped with a post-processor with CAD/CAM software and a desktop computer. The total weight of t ...

X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, max. load: 6t, clamping surface: 220x800mm, controls: HEIDENHAIN Positip 850.

X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.

X-travel: 1000mm, y-travel: 1800mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-12,000/min, weight: 18t, operational hours counter controls/ machine/ spindle: 71,517/ 70,339/ 37,470h.

x-travel:1320 mm y-travel:500 mm weight of the machine ca.:6,4 t table diameter:1830x450 mm

x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

Equipped with 24-way tool change magazine; including cooling and filter installation

Equipped with 24-way tool change magazine; including cooling and filter installation