vertical mill used for sale

This 3-axis HAAS VF-10/50HE vertical machining centre was manufactured in 2011. It features a generous X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 760 mm. The machine is equipped with a robust table size of 3000 x 800 mm and a maximum load capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50HE machine we have for sale. Contact us for further details.

This 3-axis TBI MVC 1890 was manufactured in 2013. It features a robust cast iron body, cross-slide table design, and slideway guides on all axes for enhanced rigidity and precision. Key specs include a Heidenhain CNC control, SK40 spindle taper, and a maximum spindle speed of 12000 rpm. It also boasts a 24-position automatic tool changer and integrated chip conveyor. Consider the opportunity to buy this TBI MVC 1890 vertical machining centre. Contact us for more information.

This 3-axis AXA VSC-2M was manufactured in 1991. It features a CNC control type and has an approximate total connected load of 20 kW. With around 13,063 operating hours, this machine represents an opportunity for high-quality machining capabilities. If you are looking to get high-quality machining capabilities, consider the AXA VSC-2M vertical machining centre we have for sale. Contact us for further details.

Inv. Num. : 7585 Type: DNM 400 Producer: DOOSAN Created: 2010 Parameters: Control system: Fanuc Switch-on hours: 3042 h Work table length: 920 mm Work table width: 435 mm X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm

Key data: 350 mm, 500 mm, 450 mm

CNC-controlled precision vertical slotting machine with four CNC axes and an electronic control of the rotary cutting table with a positioning accuracy of 0.001°. A machine for the efficient production of: - Fitting grooves (also conical grooves) -Splines - Internal and external gears -Racks CNC control with 10" color screen and touch screen software for roughing – finishing – fine finishing (This achieves surfaces of the highest possible grades.) Lifting range of the push carriage can be programmed up to 350 mm Push-slide speeds 0 to 80 strokes/min infinitely variable Push-slide swivel range +/- 20° Largest workpiece height 640 mm Projection 500 mm Round table size 450 mm Bore in the round cutting table Ø 135 mm Maximum table load 1,250 kg Table travels longitudinal and transverse – 340 x 340 mm Power transmission of the X + Y axis by precision ball screw ...

Key data: 800 , 400 , 400

CNC controller: Yasnac Axes X-axis travel mm: 800 Y-axis travel mm: 400 Z-axis travel mm: 400 Rapid traverse m/min: 36 Worktable Table dimensions mm: 800 x 400 Spindle Spindle speed rpm: 10.000 Tool system Tool holder: BT-40 Tool magazine slots: 20 Equipment Chip conveyor High pressure pump Rated power kVA: 58 Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447

This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details.

This 3-axis YCM XV 560A was manufactured in 2011. It features a table size of 700 x 420 mm and impressive X, Y, and Z travels of 560 mm, 410 mm, and 450 mm, respectively. The machine is equipped with an 11 kW spindle power and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the YCM XV 560A vertical machining centre we have for sale. Contact us for further details.

Key data: 650 , 500 , 450

CNC controller: FANUC Professional 3 Axes X-axis travel mm: 650 Y-axis travel mm: 500 Z-axis travel mm: 450 Distance spindle nose - table surface mm: 150 - 600 Worktable Table dimensions mm: 1.000 x 450 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 18/22 Tool system Tool holder: ISO 40 Tool magazine slots: 20 Equipment Chip conveyor various rigid tools High pressure pump Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447

This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. Its well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine.

Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg

Inv. Num. : 6634 Type: MGH 250 Produzent: MECTRON Erzeugt: 2010 Parametern: Steuerungssystem: SINUMERIK 840DSL Arbeitstischlänge: 400 mm Arbeitstischbreite: 300 mm Maximale Tischbelastung (gleichmäßig): 80 kg Maximale Vertikalspindeldrehzahl: 30000 1/min Minimaler Abstand zwischen der Spindel und dem Tisch: 100 mm Maximaler Abstand zwischen der Spindel und dem Tisch: 350 mm Verfahrwege X-Achse: 250 mm Verfahrwege Y-Achse: 250 mm Verfahrwege Z-Achse: 250 mm Maximale Vorschubgeschwindigkeit Achse X: 36 m/min Maximale Vorschubgeschwindigkeit Achse Y: 36 m/min Maximale Vorschubgeschwindigkeit Achse Z: 36 m/min Kegel: HSK E 25 Anzahl der Achsen: 3 Stücke Maschinenhöhe: 1070 mm Maschinenlänge: 1660 mm Maschinenbreite: 1800 mm Maschinengewicht: 1850 kg Ausstattung: Kühler OilMatic C750 Transformator

Offer 24157 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Stepless belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - Saw blade welder IDEAL -Lighting

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

Inv. Num. : 7652 Type: C 600 V Produzent: Hermle Erzeugt: 2001 Parametern: Steuerungssystem: Heidenhain 430 Betriebsstunden: 31000 h Arbeitstischlänge: 800 mm Arbeitstischbreite: 465 mm Anzahl der Stapelpositionen: 30 Stücke Maximale Vertikalspindeldrehzahl: 16000 1/min Verfahrwege X-Achse: 600 mm Verfahrwege Y-Achse: 450 mm Verfahrwege Z-Achse: 450 mm Kegel: ISO 40 Ausstattung: Späneförderer IKZ

Table clamping surface: 765 x 400 mm Travel x/y/z: 650/410/510 mm Spindle holder: BT 40 small/large distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8000 rpm Number of tool positions: 20 pieces Feeds: approx. 30 m/min Rapid traverse: approx. 30 m/min electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2300 x 2100 x 2650 mm Weight: 4000 kg

swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers

turning diameter:200 mm swing diameter:260 mm turning height:60 mm

Inv. Num. : 7661 Type: 605 CNC Producer: Witech Created: 2005 Parameters: Control system: NUM 1040 Work table length: 220 mm Work table width: 210 mm X-axis travel: 330 mm Y-axis travel: 150 mm Z-axis travel: 150 mm Machine height: 2300 mm Machine length: 1650 mm Machine width: 1730 mm Machine weight: 750 kg Equipment: 4 Tool Holders Pump Spindle temperature device Heidenhain Linear Measurement

x-travel:800 mm y-travel:460 mm z-travel:510 mm total power requirement:20 kW weight of the machine ca.:8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough.

x-travel:560 mm y-travel:450 mm z-travel:450 mm table surface area:760 x 410 mm turning speed range:8.000 U/min total power requirement:20 kW Vertical Processing Centre

turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024

ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros

max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt

turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!

Inv. Num. : 4891 Type: VHC3-XTS Produzent: AXA Erzeugt: 2014 Parametern: Steuerungssystem: Heidenhain iTNC530 Einschaltstunden: 22010 h Betriebsstunden: 7118 h Arbeitstischlänge: 2200 mm Arbeitstischbreite: 700 mm Maximale Tischbelastung (gleichmäßig): 3000 kg Anzahl der Achsen: 5 Stücke Minimale Vertikalspindeldrehzahl: 20 1/min Maximale Vertikalspindeldrehzahl: 10000 1/min Verfahrwege X-Achse: 2600 mm Verfahrwege Y-Achse: 1000 mm Verfahrwege Z-Achse: 950 mm Kegel: SK40 Ausstattung: Achse C - integrierter NC-Drehtisch mit einem Durchmesser von 800 mm Achse B - Spindelneigung /- 100° Teiler zum Teilen des Arbeitsbereichs Sonde Schraubstock

turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!

turning diameter:150 mm

x-travel:700 mm y-travel:550 mm z-travel:500 mm tool taper:SK40 spindle speed max.:12.000 U/min Tool changer:30 fach electronic handwheel chip conveyor

max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm

table diameter:500 mm total power requirement:3 kW weight of the machine ca.:2 t dimensions of the machine ca.:2300 x 1270 x 2200 mm

Cutting height:150 mm saw band length:2400 mm cutting width:350 mm total power requirement:380 V weight of the machine ca.:350 kg dimensions of the machine ca.:800 x 950 x 1650 mm

Specifications will follow asap

machine ready for transport and to be assessed on viewing day

Year: 1998 Serial No.: 458-66 Type/Function: 4-Axis Vertical CNC Machining Center Configuration: 2 Pallets, 2 × 4th Axis Tsudakoma Numerical Control: SIEMENS Included Equipment: KNOLL Filter Unit, Chip Conveyor

Category: High precision 5-axis CNC vertical machining center Brand: MATSUURA Model: MAM72-63V Year: 2007 Features: Matsuura G-Tech 30 control, 5 simultaneous axes, rotary table, three-phase motor 415 V / 50 Hz, power 69 kVA, serial number 17306 Origin: Matsuura Machinery Corp., Fukui, Japan Status: CE-compliant machine

Key data: 1050 mm, 530 mm, 510 mm

Inv. Num. : 7734 Type: VCS 530 Producer: MAZAK Created: 2015 Parameters: Control system: MAZATROL MATRIX 2 Work table length: 1300 mm Work table width: 550 mm Number of synchronized axes: 3 Maximum table load (uniform): 1200 kg Number of stacking positions: 30 Speed: 10-1000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel (spindle and pinola): 510 mm Cone: ISO 40 IKZ: 15 bar Machine weight: 7700 kg Equipment: Tool probe Workpiece Probe Oil Mist Separator IKZ Oil mist extraction Number of pallets: 2

Inv. Num. : 7737 Type: Alpha-T14 iD Producer: FANUC Robodrill Created: 2004 Parameters: Control system: Fanuc series 16i-MB Switch-on hours: 23500 h Work table length: 750 mm Work table width: 380 mm Cone: BT30

Control Ultimax 4 Travel X/Y/Z 760 x 510 x 610 mm Table size 1020 x 510 mm Speed 12,500 min-1 Tool magazine for 24 Wkz., SK 40

machine without tools, vices. measuring probe is included View machine on viewing day for correct assessment, machine ready for pick up

With saw band welding device

Manufacturer: KAO FONG MACHINERY CO., LTD. (KAFO) Year: 1990 Type: CNC Vertical Machining Center CNC Numerical Control: FANUC Series 15-M Axes: 3-axis (X, Y, Z) Strokes: X 1030 mm / Y 210 mm / Z 610 mm Spindle: BT40 – up to 6000 rpm – power approx. 11 kW Tool magazine: 20 positions BT40 Weight: approx. 6000 kg Origin: Taiwan Notes: Heavy-duty CNC vertical milling and boring machine for general machining.

machine ready for transport and to be assessed on viewing day. damage to electrical cabinet / driver

Manufacturer: HARTFORD Year: 1999 Type: CNC Vertical Machining Center Numerical Control: FANUC O-M Axes: 3 Axes (X, Y, Z) Strokes: X 1000 mm / Y 500 mm / Z 550 mm Spindle: BT40 – 8000 rpm Equipment: Chip Conveyor, Full Documentation (Operator's Manual, Electrical Diagrams, FANUC Documentation) Condition: Machine in working order, loaded on truck (LOADED) Condition: used

- Including 15 bar cooling pump, cooling tank with chip conveyor and Mazak Die-Mold package (software) - Tools and fixtures are not included

Wooden band saw with extendable and swivel saw table Roller diameter 200 mm Cutting height 80 mm Cutting width 180 mm Motor power 350 W Table size mm Table tilt 45 degrees Saw blade length 1400 x 6.5 x 0.35 mm Condition: never used / new (5)