vertical mill used for sale

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

ID3763 Sandvik Pantera DP1100i Year of construction 2014 approx. 11.060 hours/hours Blasting hole drill rig, with rod changer, cab with safety grille, radio, roller blinds for cab windows, TIMi – rig alignment instrument, hydraulic tail supports, central lubrication system, all servicing carried out by Sandvik, good condition, the last hammer service was carried out 300 operating hours ago & the last safety inspection in January 2026. Blast hole drilling rig, with rod changer, cab with protective grille, radio, roller blinds for cabin windows, TIMi – carriage alignment instrument, hydr. Bottom supports at the rear, central lubrication system, all service done by Sandvik, good condition, the last hammer service was carried out 300 hours ago & the last safety inspection in January 2026

CNC Machining Center Vertical DECKEL-MAHO - DMC 63 V Built in 2002 in good condition. Control Heidenhain TNC 430 Heidenhain Hours: 10985 Specifications: Main spindle Speed range - main spindle 20 - 8,000 rpm Drive power - main spindle 13 / 9 kW Max. torque 83 / 57 Nm Tool holder SK 40 Workbench: Table clamping surface 800 x 500 mm max. table load 500 kg Installation height max. 240 mm Number of T-slots 5 T-slots - width 14 H12 mm T-slots - spacing 100 mm Distance between spindle nose and table 150 - 650 mm Feeds Feed rate X, Y, Z: 30,000 mm/min Rapid traverse ( X / Y / Z ) 30 m/min Tool changer: Tool changer 24 pos. max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 140 mm max. tool length 300 mm max. tool weight 7 kg Total power requirement 30 kVA Machine weight approx. 4 t Space requirement approx. 4.0 x 3.5 x 2.7 m Accessor ...

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

GRP tank, suitcase tank, vertical, three-chamber tank with three domes and lids Water tank, upright Polyester tank with a volume of 10,000 L Dimensions: 1.40 m wide x 1.90 m deep x 4.35 m high

SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA - transversal sanding on two sides of straight or shaped / curved elements - n. 2 motors for abrasive belts 7.5 hp each - n. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

SECOND-HAND VERTICAL SANDER

Inv. Num. : 3505 Type: AJV-25/404 Producer: MAZAK Generated: Parameters: Control system: MAZATROL M-32 Work table length: 1240 mm Work table width: 550 mm Maximum table load (even): 800 kg Spindle drive power: 15 kW Minimum vertical spindle speed: 28 1/min Maximum vertical spindle speed: 4000 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 508 mm Mechanical feed length axis Z: 460 mm Cone: ISO 40 Number of tools: 30 pieces Maximum tool diameter: 100 - 150 mm Max. tool weight: 8 kg Distance between uprights: 650 mm Accuracy: 0.02 mm Machine height: 3026 mm Machine length: 3810 mm Machine width: 2590 mm Machine weight: 8.1 t

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

Diametro Tavola Rotante: 1000 Posizioni Tavola: 2 Canali caldi: 8

Spessore stampo: 200 min.; corsa piano mobile: 500.

Tavola rotante a 3 stazioni Ore di lavoro 15500

Key data: 1200 mm, 400 mm, 425 mm

Inv. Num. : 4455 Type: FZ 16L Producer: CHIRON Created: 1987 Parameters: Control system: Siemens Sinumerik System 3 Work table length: 1880 mm Work table width: 475 mm Mechanical feed length axis X: 1200 mm Mechanical feed length axis Y: 400 mm Mechanical feed length axis Z: 425 mm Machine height: 4000 mm Machine length: 2400 mm Machine width: 2800 mm Machine weight: 3500 kg

Controllo: CC-200; Euromap: 200/80; spessore stampo: 450 min; corsa piano mobile: 357.

MASSIMA DIMENSIONE STAMPI 400X400mm

x-travel: 600 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc type: Serie 0-MD mm Tool changer: 16 Pos. spindle taper: ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Doosan 3-Axis CNC Vertical Machining Center Heavy-Duty 3-Axis Vertical Machining Center Built for aggressive cutting capacity, this 2018 Doosan Mynx 7500/50 is a robust 3-axis CNC vertical center ideal for heavy part machining and high-productivity workflows. Technical Details ‍ 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Doosan Model: Mynx 7500/50 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1525 mm / 762 mm / 625 mm Table size: 1600 x 750 mm Max. workpiece weight: 1500 kg Spindle speed: 60 – 6000 rpm Spindle motor power: 18.5 / 22 kW Max. torque: 452 Nm Spindle taper: DIN 69871 B SK 50 Distance spindle nose to table: 200 – 825 mm Distance spindle center to column: 785 mm Rapid traverse (X, Y / Z): 30 m/min / 24 m/min Feed rate (X, Y, Z): 1 – 12,000 mm/min  ...

Nv. Num. : 7401 Type: QM-40 SA Producer: Feller Created: 2007 Parameters: Control system: FANUC Maximum spindle speed: 20,000 1/min Number of axles: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of stacking positions: 24 pieces Machine weight: 6300 kg Equipment: BLUM 3D Workpiece Probe 2022/11: GO Interchangeable Arms Spindle change 2021: Installation of the BLUM workpiece probe 2020: Replacement of drive bearings and bolts on X/Y beams Replacement of caliper lubrication dispensers, new brake caliper covers Replacement of the spindle center cooling reducer

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

Hartford 3-Axis CNC Vertical Machining Center Late-Model 3-Axis CNC Vertical Center This 2021 Hartford HCMC-1682 offers exceptional structural rigidity and modern CNC capabilities, providing a highly efficient and reliable solution for versatile 3-axis milling. Technical Details ‍ 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Hartford Model: HCMC-1682 Machine number: 100000755 Year of manufacture: 2021 Controller: Fanuc OiMF PLUS 2. Operational parameters Travel (X / Y / Z): 1,600 / 820 / 660 mm Table Size: 1,750 x 820 mm Max. Table Load: 2,200 kg Spindle Taper: ISO50 Spindle Speed Geared: 4,000 / 6,000 / 8,000 RPM DDS: 10,000 / 12,000 RPM Spindle Power: 11.0 / 15.0 kW (options up to 26 kW) Rapid Traverse (X / Y / Z): 20 / 20 / 18 m/min Number of ATC Stations: 32 Spindle Nose to Table: 150 – 810 mm Electri ...

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

Toyoda 3-Axis CNC Vertical Machining Center Robust 3-Axis Vertical Machining Center Designed for stability and endurance, this 2008 Toyoda FV 1365 provides high-accuracy 3-axis CNC milling to support a wide variety of industrial metalworking applications. Technical Details ‍ 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Toyoda Model: FV 1365 Machine number: 0831 Year of manufacture: 2010 2. Operational parameters Travel (X / Y / Z): 1300 mm / 650 mm / 600 mm Table size: 1100 x 650 mm Max. load on table: 900 kg Spindle: 18.5 kW; 6000 rpm Tool holder: BT50 Tool magazine: 30 positions Control: Fanuc 3. Weights Machine weight: 7000 kg 4. Dimensions Overall dimensions (Width x Length x Height): 3506 x 3624 x 2940 mm ‍ ‍ Disclaimer: The technical specifications provided are for gene ...

Hassia Redatron FlexiBag 40/25 vertical form, fill & seal machine for pouches with auger dosing, bag size min. 60 x 50 mm (LxW), max. 400 x 260 mm (LxW), filling volume max. 4.4 litre, max. width of the foil reel 540 mm, maximum diameter of the foil reel 600 mm, electrics 3X230/400 V/50 Hz, capacity up to 150 cycles per minute

Key data: 1050 mm, 530 mm, 510 mm

Control Mazatrol ... MATRIX 2 Clamping table surface ... 1300x550mm Axis X ... 1050mm Axis Y ... 530mm Axis Z ... 510mm Spindle speed... 10-12000r/min. controlled axes ... 3 cooling... 15bar ISO 40 Max. table load ... 1200kg Magazine slots ... 30 Machine weight ... 7700kg The machine is in good condition, possible to test under electricity.

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

Vertical turning machine manufactured in 2003. This DAEWOO PUMA V550 features an X-axis travel of approximately 390 mm and a Z-axis travel of approximately 780 mm. With a robust machine weight of 9000 kg, it is designed for durability and performance. If you are looking to get high-quality turning capabilities, consider the DAEWOO PUMA V550 machine we have for sale. Contact us for further details regarding this machine.

This 3-axis Goodway GV 780 M vertical turning machine was manufactured in 2015. It features a maximum machining diameter of 820 mm and an X-axis travel of 500 mm. The machine includes a 450 mm main chuck and a turret with 12 positions, including 4 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Goodway GV 780 M machine we have for sale. Contact us for further details.

This 4-axis Famar Pronto 6 was manufactured in 2004 and fully overhauled in 2024. It features a maximum turning diameter of 250 mm and a turning length of 240 mm. The machine is equipped with a 12-position Sauter turret for driven tools and has a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Famar Pronto 6 vertical turning machine we have for sale. Contact us for further details.

This 3-axis TBI VC 1060 HH was manufactured in 2020. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 500 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the TBI VC 1060 HH vertical machining centre we have for sale. Contact us for further details.

This 3-axis DMG Mori Seiki DMC 635V ecoline was manufactured in 2013. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine that holds up to 30 tools. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki DMC 635V ecoline vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details.

This 3-axis NIKKEI VH-1010 was manufactured in 2007. It features a table size of 1200 × 450 mm and a maximum table load of 450 kg. The machine offers impressive axis travels with an X-axis of 1010 mm, Y-axis of 500 mm, and Z-axis of 520 mm. If you are looking to get high-quality machining capabilities, consider the NIKKEI VH-1010 vertical machining centre we have for sale. Contact us for further details.

This 4-axis MIKRON VCE 750 was manufactured in 1998. It features impressive travels of 762 mm in the X-axis, 510 mm in the Y-axis, and 560 mm in the Z-axis. The machine includes a tool magazine with 20 positions and a maximum table load capacity of 1,360 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON VCE 750 vertical machining centre we have for sale. Contact us for further details.

This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details.

standing PE tank, sulfuric acid tank. Flat bottom Volume: 16.7 m³ Dimensions: Ø 2.57 m x 3.90 m high

This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details.

standing GRP tank, polyester tank, with feet Volume: 35 m³ Dimensions: Ø 3.00 m x 5 m high

upright GRP tank, polyester tank, with bottle bottom, with two domes (on top of the tank and on the side of the spout) Volume: 40 m³ Dimensions: Ø 2.90 m x 6 m high

upright stainless steel tank with flat bottom Weight: 3 tons Volume: 43.5 m³ Dimensions: Ø 3.10 m × 6.15 m high

This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine.

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 80T was manufactured in 2004. It features impressive travels of approximately 980 mm in the X-axis and 630 mm in both Y and Z axes. The machine includes a 4-position tool changer and operates with TNC 5.0 control. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 80T vertical machining centre we have for sale. Contact us for further details.

This 3-axis Mazak VTC 760 was manufactured in 2020. It features an X-axis travel of 1740 mm, Y-axis travel of 760 mm, and Z-axis travel of 660 mm. The machine includes a spacious table size of 2300 x 760 mm and a maximum workpiece weight capacity of 1400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 760 vertical machining centre we have for sale. Contact us for further details.

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m