vertical machine center used for sale

Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...

Used machine Machine Type: CNC Turning Center Model No.: CLX450V4 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Fanuc Year of manufacture: 2023 #001354 TECHNICAL DATA: Turning diameter max. approx. 400 mm Turning diameter standard approx. 310 mm Chuck size approx. 260 mm Turning length approx. 755 mm Rod diameter max. spindle/chuck approx. 80/78 mm Turret stations approx. 12 X-axis approx. 276 mm Z-axis approx. 830 mm Y-axis approx. 120(+-60) mm Tailstock approx. 800 mm Spindle speed approx. 4000 rpm Speed AGW max. approx. 4000 rpm Rapid traverse X/Z approx. 30/30 m/min Rapid traverse Y approx. 22.5 m/min Footprint L x W x H approx. 4.30x2.45x2.30 m (with chip conveyor) Machine weight approx. 6,250 kg Main spindle A2-8" 17 / 25.5 kW (100/40% ED), 4,000 rpm - 3-jaw chuck - Differential Compressive Stress for the Main spindle - Foot control ped ...

Used machine CNC Turning and Milling Center Machine Type: CNC Lathe Model No.: NLX2500Y/700 Manufacturer: DMG MORI Control: CELOS Year of Make: 2016 #001252 - Main spindle 4,000 rpm - Clamping cylinder main spindle - 3 cheek chuck - Foot switch (double) for main spindle - Y-axis - 12-speed BMT60-star turret for powered tools - Cantilever length X-axis driven tools 100mm - Scraper belt chip conveyor, rear discharge - High-pressure cooling system (800/1,100 W) 5bar - Line filter for coolant - Mechanical interface for oil mist separator 150mm - Without in-machine tool presetter This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 TECHNICAL DATA: 5. Axis 3 + 2 axes non-simultaneous X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 520 Rapid traverse: (X/Y/Z) [m/min.] 30 Max. speed: [1/min.] 12,000 Drive power: [kW] 13 Torque: [Nm] 82 Tool holder: HSK63 Tool positions: 60 NC swivel rotary table B-axis -10° / +95° C-axis 360° Table size: [mm] 800 x 620 Max. table load: [kg] 350 Space requirement (LxWxH): [m] 5.35 x 4.14 x 3 Machine weight: [kg] 4,700 Features: Chip conveyor Internal cooling (IKZ):40 [bar] Tool breakage detection Heidenhain TS 27 R Probe Heidenhain Blum Lasers for Tools Direct Path Measurement System Electronic handwheel Machine preparation for DMG MORI PH 150 - Automatic lifting door on the right - Robot interface (DMG MORI standard) - ...

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine CNC lathe Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year of Make: 2006 TECHNICAL DATA: Max. turning length: [mm] 1,250 Max. Rotary Ø over bed: [mm] 600 Max. rotary Ø over slide: [mm] 410 Spindle bore: [mm] 90 Number of controlled axes: 2 Speed range: [1/min.] 3,000 Drive power: [kW] 36.5 / 27.5 Torque: [Nm] 785 Tailstock MK 5 Quill 80mm Number of turrets: 1 Travel X-axis ob. Rev. / unt. Rev.: VDI 40/8 Tool positions: 8 Machine weight: [kg] 5,500 Space requirement (LxWxH): [m] 5.0 x 2.0 x 2.2 m Features: Chip conveyor 3-jaw chuck [mm] 315 This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

Key data: 254 mm, 700 mm

Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 4036h Cumulative cutting time Head 1 2058h Machine running time 8605h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition

Swiss-made Isoma centering microscope, in very good condition. 10x magnification, hardened and ground steel tube Ø25h5. Zentriermikroskope der Schweizer Marke Isoma. Vergrösserung 10x, Stahltubus Ø25h5 gehärtet und geschliffen. Zustand: sehr gut. Centering microscope from the Swiss brand Isoma. Magnification 10x, Steel tube Ø25h5 hardened and grounded. Great condition.

The machine is in good technical condition, after prior agreement it is possible to test it. Spindle completely overhauled summer 2023 Ball screw replaced in Z axis in 2020. Feeds: X axis 850 mm Y axis 700 mm Z axis 750 mm Working feed 1-24000 Positioning accuracy +/- 0.005 Rapid feed – 48m/min all axes. Distance spindle face – front of table 150-900 mm Distance spindle axis – pallet surface 50-750 mm Pallet – 500 x 500 Spindle alfaP22/8000 Motor power (continuous/15') – 11/15/18.5 Spindle speed – 8000 rpm Base speed – 8000 rpm Tool clamping force – 1000 N Max. torque (15') 29.2 Nm Orientation built-in sensor Taper ISO 40, taper 7/24 Power transmission – synchronizing belt and pulley Cooling through the spindle – 70 kg/cm2, max flow 20 L/min, pump power 3.7 KW Magazine for 60 tools – chain – be careful, the catalogue incorrectly states 40.

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   X-axis travel: 550 mm   Y-axis travel: 320 mm   Z-axis travel: 360 mm TABLE   table surface (left-right): 820 mm   workpiece load (max): 500 kg SPINDLE / HEAD   spindle revolutions (max): 24000 /min   tool fixture: HSK A50 AXIS DRIVES   rapid traverse: 75000 mm/min TOOL MAGAZINE   number of positions: 24 AUTOMATIC WORKLOAD EQUIPMENT   workpiece manipulator: articulated robot   store type: table changer   number of store positions: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7700 kg ATTACHMENTS   guideway covers: yes   central lubrication system: yes   chip conveyor: yes   coolant unit: yes   closed cabin: yes   European CE standards: yes - Shuttle t ...

Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.

Fully functional CNC turning and milling center CNC Lathe Manufacturer: Index Type: G250 G 250 Year of Make: 2004 Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Vertical BAZ MIKRON VC 500 with internal cooling 10 bar Year: 2001 Control: Heidenhain 430 TNC Operating hours: 3,300h Technical data: Spindle speed: 10,000 1/min Drive power: 13 KW Tool holder: SK 40 Number of magazine slots: 21 pcs. Travels: X-axis: 510mm Y-axis: 510mm Z-axis: 560mm Table size: 650x600mm Accessories: - IKZ with 10bar - Späneförderer - Electronic handwheel - Renishaw 3D button - Oil mist extraction - Rotoclear Machine was in a training company

Cutting center Type: TS 90 Manufacturer: Macmazza Year: 2019 Cutting length: 4300 mm Effective Cutting Height: 72 mm Motor power: 10 – 20 hp Main blade diameter: 220–325 mm Weight: 3500 Kg Dust extraction hood diameter: 2×120 mm 2×100 mm Saw carriage advance speed: 3-50 m/min Saw carriage return speed: 30-120 m/min Pusher speed: 2-25 m/min Pusher return speed: 25-70 m/min Suctions: 4000 m³/h 2500 N/m² Label printer Machine in good condition, under power Find more here - / Contact us at -

A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2021 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of spindle stylus

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2021 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2022 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes

CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package

A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.

A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible.

A vertical CNC 3-axis gantry machining center POS is available. Travel X/Y/Z: 2050mm/1050mm/780mm, table dimensions X/Y: 2200mm/1000mm, max. table load: 3000kg, tool holder: HSK-63, tool stations: 60, speed: 18000rpm, rapid traverse: 30m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 6500mm/4200mm/3800mm, weight: approx. 20000kg, control: Heidenhain, spindle hours: 10375h. Including infrared probe, IKZ and Blum tool measurement. Documentation available. An on-site inspection is possible.

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: Siemens 840 D rotary table: 800 mm c-axis: 0.001º ( ±360º) 0 B-axis (table): +25 / -110 º mm number of spindle speeds: 18.000 U/min/rpm tool taper: HSK 63 Tools changer: 38 fach/tools Internal cooling system: 80 bar handwheel: total power requirement: 43 kVA weight of the machine ca.: 10,6 t dimensions of the machine ca.: m Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Vertical machining center Machine type: DMG DMC 635 V/P Control: Heidenhain iTNC 530 Year of Make: 2013 TECHNICAL DATA: Travels: X-axis: [mm] 635 Y-axis: [mm] 510 Z-axis: [mm] 460 Speed range: [1/min.] 10,000 Tool holder: SK 40 Tool Changer Tool positions: 30 Pallet system Number of pallets: 2 Table size: [mm] 560 x 790 Features: No internal cooling (IKZ) Electronic handwheel Probe TS649 Tool breakage detection table switches Chip rinsing gun This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

At present, for office use (cadastral category A/10), the entrance is \"open space\", ideal for welcoming customers or for organizing different workstations in a flexible way. The main work area is completed at the rear by a second reserved compartment — perfect as a private office or archive — and a dedicated toilet. The property is in good general condition, proti with electrical system and heating by convectors. The transformation into a two-room residential apartment can be achieved thanks to the distribution of the spaces. CADASTRAL DATA: - Province of Pesaro/Urbino - Municipality of Macerata Feltria - Land Registry of Buildings, sheet 41 parcel 342, sub. 2, cat. A/10, class U, 3-room consistency, income € 402,84 URBAN PLANNING AND CADASTRAL COMPLIANCE: No urban planning checks were carried out, as the unit is located within a larger building built in the pre-1967 era a ...

Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -

Manufacturer: EMCO Maxxmill 350 Model: Maxxmill 350 Year of Manufacture: 2017 Type of Machine : Milling Center Spindle hours: 11,000 CNC Control: Heidenhain iTNC620 HSCI Spindle: ISO30, 12,000 rpm, 33 Nm, 7 kW 4th axis: Yes 5th axis: Yes Automation system: Lang Eco Compact 10 - fully operational and pre-configured Condition: Used, fully functional Axis Travel - X axis: 350 mm - Y axis: 250 mm - Z axis: 300 mm Equipment and Features - Tool magazine: 50 positions - Chip conveyor: Yes - Band filter: No - Pallets: No - Comprehensive ISO30 toolholder package included - Lang Eco Compact 10 automation system - fully operational and pre-configured, included - Custom-built workspace cover - special manufacture, included Find more here - / Contact us at -

Key data: 800 mm, 900 mm, 650 mm

Double-spindle machining center with swivel beam for mounting tension bridges Spindle spacing 800 mm Spindle speed up to 12,500 1/min Power 10% - 40% - 100% ED = 42 / 35 / 28 KW Torque 10% - 40% - 100% ED = 200/ 165/ 135 Nm Tool changer 2 x 42 tool positions Tool holder HSK 80 Rapid traverse 120 m/min - CNC control Siemens 840 Dsl - Central coolant facility

A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible.

CATEGORY — 5 Axis MANUFACTURER — DMG MORI MODEL — DMU 85 MONOBLOCK STOCK NUMBER — ONY100000587 MODEL YEAR — 2013 CONTROL PANEL — SIEMENS 840 D SOLUTIONLINE AXIS STROKE — X 935 MM / Y 850 MM / Z 650 MM ROTARY AXIS MOVEMENTS — A +/- 120 ° / C 360 ° SPINDLE SPEED — 18.000 MIN/-1 POWER CAPACITY-MAIN SPINDLE — 35 kW (40% ED) MAX. TORQUE — 135 Nm (40% ED) TOOL HOLDERS — SK 40 NUMBER OF TOOLPOSITIONS — 30 TABLE SURFACE AREA — 1.000 X 750 MM ( d 850 X 750 MM) MAX. TABLE LOAD — 1.000 KG TOTAL POWER REQUIREMENT — 46 KVA WEIGHT OF THE MACHINE — 13.500 KG DIMENSIONS OF THE MACHINE — 3.15 X 3.92 X 3.21 M

Inv. Num. : 9030 Type: EM80 Producer: ADIGE Created: 2015 Parameters: Control system: SIEMENS Switch-on hours: 37558 h Hours: 26407 h Machine weight: 8500 kg The machine is designed to process steel tubes with a length of 20–600 mm and a diameter of 20–80 mm.

Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma

CONTROLS   CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm   Y-axis travel: 450 mm   Z-axis travel: 450 mm   rotating range B-axis from: -115 °   rotating range B-axis up to: 30 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   clamping surface diameter: 450 mm   workpiece load (max): 200 kg SPINDLE / HEAD   spindle revolutions (max): 20000 /min AXIS DRIVES   rapid traverse X: 22000 mm/min TOOL MAGAZINE   number of positions: 220 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4400 mm   space requirements -front/back-: 3400 mm   total height: 2700 mm   total weight approx.: 8000 kg ATTACHMENTS   digital display: yes   chip conveyor: yes   cool ...

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 90 mm shaft -made of: gunmetal -Number: 2x bearings available -Price: per piece -Dimensions: 130/130/H160 mm -Weight: 4.7 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 100 mm shaft -made of: gunmetal -Number: 3x bearings available -Price: per piece -Dimensions: 160/125/H155 mm -Weight: 12 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 35 mm shaft -made of: gunmetal -Number: 1x warehouse available -Price: per piece -Dimensions: 70/49/H65 mm -Weight: 1.1kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 50 mm shaft -made of: gunmetal -Number: 10x stock available -Price: per piece -Dimensions: 92/70/H82 mm -Weight: 2.3 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 55 mm shaft -made of: gunmetal -Number: 50x stock available -Price: per piece -Dimensions: 90/68/H85 mm -Weight: 2.1 kg/piece

revolving point, revolving center point, revolving Morse taper, revolving center point, revolving lathe point, center point -Manufacturer: Stieber % Nebelmeier, revolving center point with adapter set unused -Types: RKN 3 DM 4-22 -Recording: MK3 / MK4 -Price / fee: complete -Dimension box: 270/180 / H65 mm -Weight: 3 kg

Cardan shaft, cardan shaft, universal joint, center bearing, angular gear -Cardan shaft: angular gear, unused -Type / order no .: 21001375 402027/201 7610AVA07 -Shaft: Ø 25 x 75 mm -Measurements: see photos -Quantity: 4x angular gear available -Price per piece -Dimensions: 335/130 / H120 mm -Weight: 5.6 kg / pc.

Cardan shaft, cardan shaft, universal joint, center bearing, angular gear -Cardan shaft: angular gear, unused -Type / order no .: 21001375 402027/201 7610AVA08 -Shaft: Ø 32 x 80 mm -Measurements: see photos -Number: 10x angular gear available -Price per piece -Dimensions: 390/160 / H165 mm -Weight: 11.1 kg / pc.

Cardan shaft, cardan shaft, universal joint, center bearing, holder -Cardan shaft: center bearing, unused -Type / order no .: 21001375 402027/201 7610AVA06 -Inside: O 44 mm -Measurements: see photos -Number: 12x holders available -Price: per piece -Minimum order: 4 pieces -Dimensions: 147/93/30 mm -Weight: 0.6 kg / pc.

live center, live center, live morse taper, live center, live lathe center, live center, slip-on center, heavy duty live center -Manufacturer: Roterberg Drehmeister, revolving center point slip-on point -Type: 80 TGL 30-2325 -Recording: see photos -Center point: Ø 50 - 148 mm -Total dimensions: Ø 149 x 220 mm -Weight: 9.8kg

Centering device, centering unit for bending machine, straightening machine, sheet metal straightening machine, strip straightening machine, strip straightening device, sheet metal straightening system, for eccentric press, hydraulic press -Manufacturer: Schied: centering device -Hole distance: 300/90 mm O 13 mm -Dimensions: see photos -Total dimensions: 460/160/H160 mm -Weight: 17.5kg

fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Manufacturer: WMW ABW, fixed centering tip with mounting bore -Recording: Morse cone MK5 -Bore: Ø 8 mm -Number: 2x centering tips available -Price: per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg/pc.