vertical lathe machine used for sale

Vertical band saw PEHAKA type SM 4Fabr. No. 27060 Year of construction approx. 1980Projection 380 mmTable size 620 x 480 mmCutting height 250 mmRoller diameter 400 mmWorking height 1120 mmSaw blade length min. 2900 - max. 3100 mmSaw blade speed 22-125 m/min. infinitely variableMotor power 0.6 / 0.75 kWNet connection 380 volts, 50 Hz- infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds- Saw table tiltable +/- 15- Saw blade butt welding machine IDEAL BS 0-16-

Technical data: Complete retrofit year 2003 CNC Fagor 8055T Working diameter 5,000mm Table diameter 4,500mm Table speed 35rpm Z axis travel 1,500mm nr.02 RAM capto C8 tool holder Maximum workpiece height 2,500m main motor power 182 Kw nr.02 chip evaders permissible weight on the table 63 ton Machine in excellent condition available unless sold.

Heidenhain TNC 530, Table size 700 x 500 mm, Spindle holder CAT40, 24-position automatic, 10,000 rpm spindle Machine weight 7,500 kg, Connection 16 kW

Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

Technical data shown on picture. Parts shown by hand not come.

Carnaghi Ø 1700 mm CNC Chuck dia.: 1600 mm Max turningdia -- passage: 1700 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 2600 Turret: yes Qty Tools: 7 Coolant pump: yes

Carnaghi ABH 1550 - Ø1600 mm Chuck dia.: 1200 mm Max turningdia -- passage: 1400 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 1400 TOOLING: yes Turret: yes Qty Tools: 7 Coolant pump: yes

max diam 1830 , table diameter 1600 , sinumeric 840 d . 2 x vertical

Trimos TVM 602

Digimar 817 CLM

Mitutoyo 570-313 Digital Height ruler

Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041

Trimos V 604 +

Mitutoyo HDS-G24 Digimatic Height Gauge HDS

GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

De TVM 302 ( meetbereik ~320 mm / ~12 inch) heeft de volgende typische specificaties: Meetbereik: 320 mm (12 inch) Maximaal toegestane fout: 0,02 mm Herhaalbaarheid (2 s): 0,005 mm Frontale vierkantheidsafwijking: 0,02 mm Resolutie: 0,01 mm / 0,001 mm (of in inches .0005/.00005) afhankelijk van het beeldscherm Meetkracht : ca. 3 N Maximale verplaatsingssnelheid van de handmatige wagen : 1500 mm/s. Gegevensuitvoer: Opto-RS232. laboaragon.com+1 Bedrijfstemperatuur : +10 °C tot +40 °C; Opslag: -10 °C tot +40 °C. Gewicht (gietijzeren voet): ~6 kg. 4 keer op voorraad

x-travel: 820/850 mm y-travel: 300/330 mm z-travel: 485/505 mm weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1670 x 1620 x 2500 m Further techniscal detals please consider pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

ID3701 Nordmeyer 3/14 year/Baujahr 2012 19.400 hours/hours Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344 Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344

ID3701 Nordmeyer 3/14 year/Baujahr 2012 19.400 hours/hours Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344 Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

This 3-axis HULLER HILLE DVH 150 Duo vertical turning machine was manufactured in 1999. It features a maximum turning diameter of 160 mm and a swing diameter of 200 mm. Equipped with a Siemens 840D CNC control, it offers high precision and efficiency with speeds up to 7500 rpm and rapid traverse rates up to 60,000 mm/min. Ideal for complex turning tasks, the HULLER HILLE DVH 150 Duo machine we have for sale. Contact us for further details.

This MORANDO VS 12 was manufactured in 1989. A robust vertical turning machine featuring a hydraulic self-centering chuck of 1,200 mm and a maximum turning diameter of 1,400 mm. It supports a table capacity of 7.5 tons and offers a table motor power of 37 kW. Complete with a chip conveyor and facilities for conical turning. For more information about this machine, please reach out to us.

This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine.

This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information.

This Okuma 2SP-V35 was manufactured in 2000. A robust vertical turning machine featuring a max turning diameter of 350 mm and height of 410 mm. It includes a spindle speed up to 2,500 RPM and a 12-station tool holder. Ideal for precise, heavy-duty turning operations. Contact us for more information.

This KOLOMNA 1532T vertical turning machine was manufactured in 1990. It features a robust design suitable for a variety of turning operations. If you are looking to get high quality turning capabilities consider the KOLOMNA 1532T machine we have for sale. Contact us for more information.

This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information.

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information.

This EDELHOFF DARR 1/80 press was manufactured in 1995. It offers a pressing force of 800 kN with adjustable strokes ranging from 20-80mm and stroke rates from 30-200 per minute. The machine features a substantial table surface of 810x860mm and a maximum distance between table and ram of 450mm. It weighs 9.5 tonnes, suited for robust operations in sheet metal machinery. The EDELHOFF DARR 1/80 machine we have for sale. For more information about this press, please reach out to us.

This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine.

This EMAG EMAG VL5 i DSL vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with 18kW and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us.

A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible.

Key data: 300 mm, 150 mm, 250 mm

Hello, We hereby offer you a used universal/vertical milling machine, type SH 4 D, from the manufacturer Steinel. Manufacturer: Steinel Model SH 4 D with vertical milling head FRP 3 Machine No. 8160 Travels X-Y-Z axis X = 300mm, Y = 150 mm. Z = 250mm. Table dimensions 740 x 200 mm Clamping surface 620 × 130 mm Spindle speed 32 – 1250 rpm Feed stages 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke 100 mm Power main motor 1.5 kW Weight approx. 800 kg Dimensions approx. 1,100 × 1,300 × 1,600 mm Conventional control Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: 1 piece used Universal/Vertical Milling Machine, Steinel, Type SH 4 D Area of ap ...

This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information.

This EMAG VTC 250 was manufactured in 2013. It features a chuck diameter of 250 mm and can handle workpieces up to 140 mm in diameter. The machine offers an X-axis travel of 300 mm and a Z-axis travel of 740 mm. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information.

This EMAG VTC 250 was manufactured in 2015. A vertical turning machine featuring a chuck diameter of 250 mm and maximum workpiece diameter of 140 mm. Axis travel includes 300 mm on the X-axis and 740 mm on the Z-axis. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information.

TBS Pack Stick - Pack vertical pouch packaging machine SBM 190-H-L with KBS dosing and Domino thermal transfer printer, built 2020, in operation for small packages up to max. 60 ml,, suitable for laminated films (PET/Nylon), power: 10 - 20 bags / minute, Dimensions / weight: D x W x H: approx.: 1,250 x 800 x 1,800 mm (without product hopper above the machine), Technical details:: Bag widths: 16 - 90 mm, bag length: 90-200 mm, film width: 40 - 190 mm, Domino thermal transfer printer:: Type V 120i, KBS pneumatic piston pressure filling system:: Model KBS-9832G-06N, max. dosage: up to 60 ml, Transport and cleaning systems: Bag widths: 16 - 90 mm, bag length: 90-200 mm, film width: 40 - 190 mm, Productbrochure PDF: D x W x H: approx.: 1,250 x 800 x 1,800 mm (without product hopper above the machine), produktberührende Teile: Type V 120i

This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine.

Key data: 700 mm, 250 mm, 350 mm

Beautiful Rambaudi V2 XYZ= 700x250x350 The stroke of the upper ram is 400 mm Table dimensions 1070x300mm Quill with R8 cone Feeds and rapids on X Rapids on Z Feed up/down on the quill Spindle speed 65 to 4750 Head can turn Automatic Bird Lubricator DRO on 3 axes Some tools