vertical form and used for sale

CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg

P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 100 x 5 mm -Dimensions: 280/100/H980 mm -Weight: 10 kg

Pressure reducers, pressure regulators, manometers -for forming gas -Inlet pressure: max. 200 bar -Output: flow meter -Number: 2x reducers available -Price: per piece -Weight: 1.8 kg/piece

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 8 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.6 kg

continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

Dial indicator, dial gauge, measuring probe, measuring probe, precision dial gauge -Manufacturer: Format, precision dial gauge 10mm -Measuring range: 0-10 mm -Reading accuracy: 0.01 mm -Outer diameter: 58mm -Case dimensions: 130/75/H30 mm -Weight: 0.2 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Format, caliper caliper -Measuring range: 0-250 mm / 0-10 inches -Measurement accuracy: 0.05 mm / 1/128 In -Dimensions: 360/140/H9 mm -Weight: 0.4 kg

continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) grilling time : 1 minute to 60 minutes belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 1 piece available -Dimensions: 305/145/H400 mm -Weight: 5.4 kg

workbench, work table, assembly bench -Width: 1250 mm -Depth: 700 mm -Height: 860 mm -Drawer: 1 -Weight: 75 kg

Professional meat mixer model SN25M is designed for fast and uniform mixing of meat, spices and other ingredients in butcher shops, restaurants, processing plants and professional kitchens. This model is an ideal solution for users who require reliable operation, compact dimensions and high mixing quality in daily professional use. The 50 liter tub capacity allows processing of optimal product quantities, while the operating speed of 17 to 34 rpm ensures efficient and even mixing. The machine is suitable for preparing minced meat, cevap mixtures, sausages, burger mixtures and other meat products. The construction is made of high-quality stainless steel, ensuring long service life, corrosion resistance, high hygiene standards and easy maintenance. The powerful 1.5 kW motor provides stable performance and reliable operation even under intensive use. Compact dimensions allow easy placeme ...

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

PRICE: 2.900EUR Butcher hobby Band saw Kolbe 32 Set-top model Complete stainless steel body and working table Adjustable blade tensioner Caver safety switch Cover safety saw Length is adjustable thanks to the standard joinery System cutting thickness property Maintenance-free compact design Dimensions: 60 x 50 x 110 cm Electrical power: 1.1 kW Cutting height: 32 cm Disassembled neutral work table with bottom shelf The professional disassembled neutral work table with bottom shelf is designed for restaurants, bakeries, pizzerias, and all food service establishments requiring a stable and hygienic food preparation surface. It provides a practical and functional solution for professional kitchens with limited space. Features: Professional design Stainless steel construction Disassembled structure Bottom shelf for additional storage Robust and stable build  ...

Professional meat mixer model SN50M is designed for fast and uniform mixing of meat, spices and other ingredients in butcher shops, restaurants, processing plants and professional kitchens. This model is an ideal solution for users who require higher capacity, reliable operation and high mixing quality in daily professional use. The powerful 2200 W motor ensures efficient operation and stable performance even under heavier workloads. The working speed of 25 rpm provides even mixing and optimal preparation of products such as minced meat, sausages, cevap mixtures, burger mixes and other meat products. The construction is made of high-quality stainless steel, ensuring long service life, corrosion resistance, high hygiene standards and easy maintenance. Its robust design and stable structure make this model an excellent choice for daily professional work. Compact external dimensions allo ...

Automatic case packaging machine (rebuilt in 2012) for american cases. Machine including feeding system, 2 formats (incl. Seidenader camera vision system), and other accessories. Furthermore including exit belt with PAGO labeling system.

BLISTER PACAGE FORMING MACHINE LIMPIR Machine is in perfect working condition We use machine durring production of switch production paccaging switches.

continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1,100 mm net length 11,000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : x 13,500 x 1,700 x 2,400 mm independent platen - air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (600 kW) with belt wash system

AGIE CHARMILLES FORM E 600 die-sinking EDM was built in 2024 in China by Beijing Agie Charmilles Co., Ltd. The machine is designed for precision EDM machining of workpieces with a maximum weight of 1000 kg. Electrical discharge machining enables complex shapes to be made in even the hardest materials, as well as minimises or completely eliminates the need for further finishing processes, such as polishing. The AGIE CHARMILLES FORM E 600 is a state-of-the-art solution for companies looking for high efficiency, precision and low operating costs. The stable design is based on a rigid ‘C’ shaped frame and a cross table that performs movements in the X and Y axes. Precise positioning in all linear axes is ensured by servo drives that work with ballscrews, encoders and measuring scales with a resolution of 0.1 μm. The accuracy of the movements is additionally controlled with a laser in ...

Format trolley for storing format parts for deep drawing machines made entirely of stainless steel with three drawers, a drawer and a storage surface, mobile with brake rollers Extracts resilient with 30 kg and with food-approved plastic, as well as the tray bevelled construction prevents the car from tilting. Format trolley is used for the proper storage of formats with all accessories. All parts are located in one place and can be driven to the machine when changing formats. Dimensions: 1250x900/600x1100 mm (WxDxH)

- CNC Crowning - Hydraulic tool clamping - EFL Easy form laser measuring & correction system - Set Tooling  - Laser guide protection - Controlled axis Y1/Y2/X/R/V-Axis

Used Used Case Erector Ape Form 1200: Year: 1998 Condition: As Is Used Case Erector Ape Form 1200 Year: 1998 Model: form 1200 Speed: 900 c/h Gluer mesa Included conveyor Safety protections Code: G 19 More details: https://bottlingscout.com

Used Used Case Erector TMG Formec: Year: 2002 Condition: As Is Used Case Erector TMG Formec Year: 2002 Model: formec Speed: 5.000 bph Gluer nordson Safety protections Code: G 63 More details: https://bottlingscout.com

Used Used Case Erector Ape Form 1200 HM: Year: 1994 Condition: As Is Used Case Erector Ape Form 1200 HM Year: 1994 Speed: 900 c/h Model: form 1200 hm For american box Glue closure Gluer nordson Safety protections Code: G 73 More details: https://bottlingscout.com

Used Used Bedo Tray Former 2008: Year: 2008 Condition: As Is Used Bedo Tray Former 2008: Model VA 9095 Year: 2008 Speed: 15 cpm-900 cph Closure type: hot melt glue Technomelt of Henkel Safety protections Code: G 95 More details: https://bottlingscout.com

Used Used Case Erector APE form 1200 hma: Year: 2004 Condition: As Is Used Case Erector APE form 1200 hma: Year: 2004 Speed: 900 CPH Model: FORM 1200 HMA Hot melt gluer ? NORDSON ? Year 2010 Safety Protections Code: G 90 More details: https://bottlingscout.com

Used Used Cermex tray former: Year: 2002 Condition: As Is Model: F28.40 Year: 2002 Speed: 2,000 cph Double lane Hot-melt glue closure No. 2 hot-melt glue systems Nordson Problue 7 (last overhaul 08/2023) Safety protection Code: G 103 More details: https://bottlingscout.com

Panel saw manufactured in 2013. This FORMAT4 Kappa Automatic features a robust design with a weight of 4,600 kg and a powerful 14.0 kW motor. It includes an integrated control terminal with monitor, keyboard, and mouse, along with safety wire fencing and roller material support tables. If you are looking to get high-quality panel cutting capabilities, consider the FORMAT4 Kappa Automatic machine we have for sale. Contact us for further details.

Belt sander manufactured in 2010. This FORMAT4 Finish 1302 features two internal sanding belt units with pneumatic tensioning and adjustment controls. It includes an analog control panel with dual ammeters, a digital height indicator, and a vacuum/perforated conveyor bed for efficient operation. If you are looking to get high-quality sanding capabilities, consider the FORMAT4 Finish 1302 machine we have for sale. Contact us for further details.

continuous grilling line completely stainless steel adjustable product height Useful length 1,800 mm Track width 600 mm with bottom and top band: bottom and top contact frying independent temperature control at the top and bottom electrically heated ± 90 kW with belt washing system at the top and bottom Adjustable temperature range per heating plate (6 pieces) Capacity up to 250 kg / hour depending on the product infinitely variable speed Dimensions (L x W x H): ± 3,000 x 1,650 x 2,400 mm

This 3-axis FORMAT4 PROFIT H22 was manufactured in 2009. It features a robust work table type with a pod and rail vacuum bed, equipped with 6 moveable support rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking to get high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT H22 machine we have for sale. Contact us for further details.

Plastic 3D printer manufactured in 2023. This FORMLABS Fuse 1 + 30W features Selective Laser Sintering (SLS) technology with a build volume of 165 × 165 × 300 mm. It is equipped with a 30 W Ytterbium Fiber Laser and a 10.1 interactive touchscreen for user-friendly operation. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 + 30W machine we have for sale. Contact us for further details.

Second-hand Format 4 Type Plan 51 surface planer for planing timber workpieces. Technical data: Motor: 10 kW Blade shaft: Reversible blades Z4 Working width: 510 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Type: ST-700 Sealing length: 4 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 3.3 kW Machine dimension in cm: Width: 145 Lenght: 65 Height: 98 Delivery time: after advanced payment, 1 working day

FORMAT4 PROFIT H08 21.31P CNC router was built in 2021 in Austria by the FELDER GROUP. The machine is designed for the precision machining of materials such as mild steel, wood and plastics. The machining is performed on a vacuum table with a length of 3000 mm and a width of 2000 mm, using a high-speed spindle. To maintain high machining accuracy, tools taken from the 15-position magazine are continuously measured by a special sensor. The axes are driven by high-performance YASKAWA servo motors, which guarantee high feed dynamics even during intensive use. The FORMAT4 PROFIT H08 21.31P is operated using the intuitive TpaCAD CAD/CAM software, which facilitates project preparation and machining management. The machine is also equipped with, among others, two BECKER vacuum pumps and an automatic lubrication system. All this makes the FORMAT4 PROFIT H08 router an excellent choice for busi ...

Die-sinking EDM machine manufactured in 2010. This AgieCharmilles FORM 30 features a table length of 800 mm and a table width of 600 mm. It offers an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details.

turning diameter: 520 mm turning length: 1500 mm control: Fagor total power requirement: 15 kW weight of the machine ca.: ca. 3,5 t dimensions of the machine ca.: L/B/H 3,50x1,50x180 m more info to follow The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Formlabs Fuse 1: Compact SLS 3D Printer for Nylon Components I'm selling a Formlabs Fuse 1. It's one of the few SLS printers that fits into a normal office or workshop. It doesn't need its own room, nitrogen or extraction. A 10 W fiber laser sinters nylon powder layer by layer. Support structures are eliminated, so you can fill the build space tightly with parts and print many components in one pass. Technical data Build space: 165 × 165 × 300 mm Laser: Ytterbium fiber laser, 10 W, 1064 nm, spot size 200 μm Layer thickness: 110 μm Materials: Nylon 12, Nylon 11, Nylon 12 GF (glass fibre reinforced) Up to 70% waste powder can be reused per print (nylon 12) Software: PreForm (free), files as STL or OBJ Connection via WLAN or Ethernet, operation via touchscreen Dimensions: approx. 64 × 69 × 107 cm (without base) Weight: approx. 114 kg Application The Fuse 1 is i ...

Formlabs Fuse 1+ 30W: SLS 3D Printer for Nylon, TPU and Polypropylene I'm selling a Formlabs Fuse 1+ 30W. It's the successor to the Fuse 1 and has a laser that is three times as powerful. This means that it prints up to twice as fast and can process more materials. As with its predecessor, there are no support structures. The powder carries the parts, so you can fill the entire build space with components. The printer fits in a normal workshop or office and doesn't need its own room. Technical data Build space: 165 × 165 × 300 mm Laser: Ytterbium fiber laser, 30 W, 1064 nm, spot size 200 μm Layer thickness: 110 μm Materials: Nylon 12, Nylon 12 White, Nylon 12 GF, Nylon 11, Nylon 11 CF, TPU 90A, Polypropylene Nitrogen connector (optional), which allows nylon 11 and polypropylene to be printed under inert gas Software: PreForm (free), files as STL or OBJ Connection via  ...

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Key data: 510 mm, 2250 mm, 4 St.

Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg

Description Uhlmann UPS 300 – ALU / ALU forming station, unused Unused ALU / ALU forming station for the Uhlmann UPS 300 blister machine for mechanical cold forming of aluminium composite film for the production of ALU / ALU blisters. The station is offered as a separate assembly including geared motor and associated covers according to illustrations. It is suitable as a replacement assembly or for a corresponding conversion project on an Uhlmann UPS 300. The mechanical and electrical requirements of the respective machine must be compared in advance. Product data Manufacturer: Uhlmann Associated machine model: UPS 300 Design: mechanical ALU / ALU forming station Application: Cold Working of Aluminum Composite Film Condition: unused stock goods Item number: 99-J038 Location: 59399 Olfen, Germany Scope of Delivery Forming station with tool holder Geared motor  ...