vertical boring mill used for sale

The machine is in good technical condition; testing is possible by prior arrangement. TNC530, HSK63, 12,000 rpm, 28-position tool magazine, 40-bar through-spindle coolant (IKZ), laser tool breakage detection.

The machine is in good technical condition; testing is possible by prior arrangement. X-axis travel: 850 mm; Y-axis travel: 700 mm; Z-axis travel: 500 mm. Table dimensions (LxW): 10; load capacity: 2000 kg. Rapid traverse (XYZ/BC): 35 m/min. Spindle head: HSK-A63; speed: 0–18,000 rpm; spindle motor power: 20 kW. Tool positions: 38. Control system: Heidenhain TNC 640. Air through spindle. Heidenhain TS460 touch probe. Electronic handwheel. Approx. 20 HSK-A63 tool holders (in the changer). Manual cabin roof. Preparation for mist extraction system. Wash-down gun. Original HERMLE + Heidenhain documentation.

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.

The machine is in good technical condition; it can be tested by prior arrangement.

Key data: 1120 mm, 510 mm, 510 mm

CNC vertical machine center. Control unit - MAZATROL M32B Dimensions: 4000x3000x3000mm Table: 1460x510mm Max material weight: 800kg Automatic magazine: 24 tools Tool holder: CAT 40

Manufacturer DMG-MORI Model DMF 260 Year 2011 CNC SIEMENS SINUMERIC 840D Table Table surface 2,900 x 700 mm. Maximum weight on table 2,150 kg. Routes and advances Longitudinal (X-axis) 2,600 mm Transverse (Y-axis) 700 mm Vertical (Z-axis) 700 mm Fast forward of the axes (X,Y,Z) 40 m/min Working progress of the axes (X,Y,Z) 40 m/min Axle acceleration 4 m/s2 Head Revolutions 14,000 mm/min SK 40 Head Cone DIN 69872 Main engine power 18.4 / 14 kW Automatic tool loader No. of Charger Tools 30 Maximum tool length 300 mm Maximum tool weight 6 kg. Maximum tool diameter with adjacent free positions 130 mm Maximum tool diameter without adjacent free positions 80 mm Equipment Refrigeration 40 Bar / 600 l. INCLUDED Longitudinal chip evacuator INCLUDED Coolant cleaning gun INCLUDED Portable steering wheel INCLUDED Direct Measurement System INCLUDED Machine hours  ...

Daewoo Puma V 550Year of manuf. : 2001 Control : Fanuc 18i-T Turning diam. : 730 mmTurning length : 750 mm____________Description:In General:Year of manufacture:2005Control system:Fanuc 18i-TMax. speed:2,000 rpmTurning diameter:730 mmTurning height:750 mmX-axis:390 mmZ-axis:780 mmChuck diameter:600 mmTool turret:8 stationsEquipment:Chip removal:Chip conveyorCoolant supply:Coolant pumpChuck:3-jaw chuck

Daewoo Puma V 550Year of manuf. : 2005 Control : Fanuc 21i-TB Turning diam. : 730 mmTurning length : 750 mm____________Description:In General:Year of manufacture:2005Control system:Fanuc 21i-TBMax. speed:2,000 rpmTurning diameter:730 mmTurning height:750 mmX-axis:390 mmZ-axis:780 mmChuck diameter:600 mmTool turret:8 stationsEquipment:Chip removal:Chip conveyorCoolant supply:Coolant pumpTool measurement:Renishaw tool setterChuck:SMW Autoblok 3-jaw chuck

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model No.: VF-2DHE Year: 2005 Condition: Used Stock number: 9515 Maximum vertical spindle speed: 7500 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Number of stacking positions: 20 pieces Machine weight: 3500 kg

Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements Chip conveyor Coolant / belt filter system Interlit SPB 3/600 Auction-ID: A7-50158-13

Chip Conveyor Scraper Belt Coolant system 3 pumps / cartridge filter High Pressure Pump Grundfoss Type CRK2-220/22 A-W-A-AUUV Auction-ID: A7-50158-5

Gainsborough GV2K108 VFFS bagger with auger filler Serial: GV101450 2010, Vertical form fill seal bagging machine with top mounted Augapac vectofill S4 auger filler, smart date X40 coder, HMI touch screen controls, up to 70 bags per minute, 250mm jaw width, comes with box of spare jaws, screws, belts, forming shoulders, also comes with Volkmann VS2000 vacuum conveyor which was previously used to vacuum powder into the hopper, with manual, 3Ph

Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA Pallet System MTS500, Tool Breakage Detection, Coolant System, Coolant through the spindle (23 l/min at 40bar), chip conveyor, electronic handwheel Auction-ID: A7-50158-12

This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details.

A vertical CNC machining center is offered. X/Y/Z-axis travels: 560mm/410mm/381mm, spindle speed: 60-6000rpm, drive power: 3.7/5.5kW, table size: 410mm × 900mm, max. table load: 300kg, tool shank: ISO 40 (MAS-BT40), rapid traverse X/Y/Z: 24/24/18m/min, control: Mazatrol CAM M-2. Equipped with original parameter lists. Weight: approx. 4200kg, overall dimensions X/Y/Z: approx. 2300mm/2000mm/2641mm. The program is missing because the machine has been disconnected from power for several years. Documentation available. Inspection possible by appointment.

Year of construction: 2019 CNC controller: FS-31iB (MAPPS IVB) Axes X-axis travel mm: 1540 Y-axis travel mm: 760 Z-axis travel mm: 660 Rapid traverse m/min: 20 Worktable Table dimensions mm: 1700x760 Max. workpiece weight kg: 2000 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 18,5/15/11 (10 min./30 min./cont) Spindle torque Nm: 81 (10%ED) Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 60 With free neighboring places mm: 125 With occupied neighboring places mm: 95 Max. Tool Length mm: 450 Max tool weight kg: 12 Tool-to-tool time s: 2.1 Equipment Electronic Handwheel Internal cooling lubricant supply Rinsing gun Signal lamp Tool measuring arm Mist collector Heat compensator Program restart Paper band filter Machine running times Under power: 35557 Spindle Working: 27278 Rated power kVA:  ...

Key data: 550 mm, 550 mm, 510 mm

CNC Vertical Machining Center "DECKEL MAHO M 1" With rail control Siemens 828 D Shop Mill Year of construction: 2022 Commissioning: 9/2023 Travel: X 550 Y 550 Z 510 Speed range: 20 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 650 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) IKZ 20 bar Electronic handwheel 3 D Probe Renishaw PP 40 Tool Length Measurement Renishaw TS27R Full protection cabin with sliding doors and interior lighting Coolant Setup Chip conveyor Oil mist extraction Coolant spray gun 3 Height Adjustable Machine Shoes Operating Instructions THE MACHINE IS IN TOP CONDITION!

With double pallet, HEIDENHAIN control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-15

PROMECO Evolution 4-562 vertical sandblaster • Year : 2007 • Max. operating pressure: 7 bar • Tank capacity: 6.9 L • Working temperature: -10 °C to +50 °C • Vertical structure with integrated conveyor• Digital control with touch screen• Front and rear conveyors for infeed and outfeed of windows • Robust painted steel frame• Power supply : 400 V three-phase • Weight : approx. 800 kg Auction-ID: A1-50215-43

MITSUBISHI Control Excluding machining and tooling supports AVAILABILITY END OF OCTOBER 2026 Auction-ID: A7-50204-12

Fast tool change, FANUC Series Oi-MC control Excluding machining supports, magnetic tables and tools AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-17

Quick tool change, OKUMA OSP-U100M control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-16

With double pallet, FANUC Series 18i-MB control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-10

MITSUBISHI Control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-11

travel -x axis: 550 mm travel -y axis: 400 mm travel -z axis: 400 mm a-axis: +/- 120 ° C-axis: 360 ° control: HEIDENHAIN - TNC 640 number of spindle speeds: 24.000 numbers of positions in the tool changer: 48 tool taper: HSK-A50 5-axis machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

The machine is in good technical condition; it can be tested by prior arrangement.

Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system. Attention: The machine can be transported on a standard truck! Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm

Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!

Attention: The machine can be transported on a truck up to 3000 mm wide! Additional technical specifications: • table with 5 slots • with mounted plate, plate dimensions: 900 x 550 mm • incl. vise, jaw width: 125 mm

Attention: the machine can be transported on a truck up to 3000 mm width! Additional technical specifications: • Feed rate in X/Y/Z: 20 - 15,000 mm/min • Setup mode X/Y/Z: 20 - 2000 mm/min • with in total 32-station tool changer (2 x 16 places) • max. tool diameter when all slots in magazine 1 are occupied: 130 mm • max. tool diameter when all slots in magazine 2 are occupied: 80 mm • max. tool length from spindle nose: 315 mm • max. tool weight at automatic tool changing: 8 kg • max. total tool weight in magazine: 160 kg • T-slot spacing: 63 mm

Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compe ...

MIKRON UCP 600 ist ein Vertikal Bearbeitungszenter, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. 5 Achsen für 5-Seiten-Bearbeitung; Rundtisch Ø400 mm; Verfahrwege X 600 mm, Y 450 mm, Z 450 mm; Tischbelastung 400 kg; B-Achse -115/+30°; C-Achse 360°. Werkzeugwechsler TC 30; Spindel stufenlos 50–20.000 t/min; Spindelmotor 5,5 kW; Gesamtbedarf 18 kW; Vorschub 22 mm/min; Eilgang 22 m/min; Anschluss 3x400 V 50 Hz; Gewicht ~6500 kg; Abmessungen 2500×1600×2650 mm; Schallpegel 75 dB(A). Ausstattung: Kühlmitteleinrichtung, elektronisches Handbedienpult, elektronisches Handrad. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Maschinenbau. Technische Daten ohne Gewähr

Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat comp ...

Vertical sheet metal storage, drawer sorting storage for sheet metal, Hegla, 10 compartments for sheet metal 1.50m x 3m, – used - : Price from location: 4.500.-€ (net)! Manufacturer: Hegla Type: SCH-SL-3 Year of construction 03/2010 Maximum adjustment length 3,000 mm Maximum adjustment height 1,500 mm Number of compartments:10 compartments Load capacity 500kg per drawer (10 x 500kg) Max. loading height: 1,500mm Total dimensions LxWxH: 3,250mm x 1,590mm x 1,950 mm Condition: good Available: immediately Location: 87719 Mindelheim

Manufacturer KONDIA Model A-6 Year 2015 CNC HEIDENHAIN TNC 530 HSCI Table Table surface 800 x 400 mm. Number of T-Slots 3 T-slots (width, distance) 18.125 mm. Table-floor distance 885 mm. Table distance – spindle nose (min/max) 140 / 650 mm. Maximum weight allowed on table 450 kg. Routes and advances Longitudinal travel (X) 600 mm. Cross travel (Y) 410 mm. Vertical travel (Z) 500 mm. Fast forward X/Y/Z axes 30,000 mm./min. Head Spindle taper ISO 40 DIN 69871 Maximum spindle speed 12,000 rpm Spindle power 10 / 17 kW Autoloader Tools Chain Type Random Change Warehouse Positions 20 Maximum tool width with adjacent free positionsq 135 mm. Maximum tool width without adjacent free positionsq 85 mm. Maximum tool length 250 mm. Maximum tool weight 6 kg Equipment Internal cooling 20 BAR INCLUDED Chip evacuator INCLUDED Water gun cleaning parts INC ...

Key data: 800 mm, 500 mm, 540 mm

CNC Vertical Machining Center MIKRON VCE 800 W Pro With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 500 Z 540 Speed range: 30 – 10,000 rpm continuously variable ( SK 40 ) With the following accessories: Rigid angle table 910 mm x 500 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Direct displacement measuring system (Heidenhain glass scales) Electronic handwheel Spindle cooling unit Chip rinsing gun Signal lamp Spiral Screw Conveyor Coolant Setup Operating Instructions

Robot Coupe R45 Vertical Cutter Mixer Stainless, 45L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph

Robot Coupe R30 Vertical Cutter Mixer Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph

Loose 4th axle. Auction-ID: A1-40982-10

Professional MX chisel mortising machine, designed for carpentry work and the production of mortises and assemblies in wood. Robust construction on metal frame Three-phase power supply 380 V Vertical machining head Manual lowering by large lever Tool-holding chuck Adjustable work table Guide/backgauge Workpiece clamping system Manual depth and positioning adjustment Longitudinal movement of the table On/off controls Emergency stop Heavy base for stability Professional workshop machine Auction-ID: A3-46126-37244

The machine is in good technical condition; testing is possible by prior arrangement. Spindle speed: 12,000 rpm. Travel ranges: Z 510 mm, Y 510 mm, X 835 mm. Feed rate: 30 m/min. Tool holder: SK 40. Tool magazine capacity: 30 stations. Table load capacity: 800 kg. Table dimensions: 1000 x 560 mm. Overall dimensions including chip removal system: approx. 4300 x 2500 mm (footprint). Machine weight: approx. 4450 kg. Coolant system with belt filter unit, 20 bar. Maintenance/repair history: -Tool changer adjustment: 11/2025 -Coolant rail: 11/2024 -Coaxial valve, power chain: 10/2024 -X-axis ball screw replacement, new motor belt, new lubrication dispenser: 10/2024 -HDD: 7/2023 -X-axis cover plate: 2/2023 -Rotary union: 4/2022 -Gripper set: 5/2022 -Spindle braking resistor: 5/2022 -Spindle refurbishment by Vopss: 10/2020

The machine is in good technical condition and available for testing by prior arrangement. It features a FANUC i control system, cast-iron construction, linear guideways, X/Y/Z axis travels of 1270/670/625 mm, a 1300 x 670 mm table with T-slots, a table load capacity of 1000 kg, and a 30-position tool changer. Extensive accessories included: 4th axis (rotary table), hydraulic vise, RENISHAW tool and workpiece probes, oil skimmer, 3-color signal light, belt-type chip conveyor, Filtermist 6002 mist collector, tool holders, etc.

The machine is in good technical condition and can be tested by prior arrangement. It is fully functional. It is equipped with a new tool magazine but comes without a workpiece probe, clamping fixtures, or tools.

including accessories Auction-ID: A1-44050-19

Auction-ID: A7-50403-36

Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of Make: 2000 Condition: Use, Energized, Control on Windows 7 NEW x-travel 600 mm y-travel 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm Tool changing device 18-fold Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röder's Job Manager (for processing several workpieces one after the other) Probing programs for almost all common geometries Extor Extraction System for Dusty Machining Minimal lubrication Bedtrack blower Blum measuring laser (for tool measurement length + diameter + contour and fracture control) Tool cleaning (air) Cooling unit for spindle and control cabinets Documentation Without accessories such as tools or vises Auction-ID: A7-5 ...

Ebara EVM 18 12F5 & SAER CVM 131-B/11 multistage centrifugal pumps – 11 & 5.5 kW Specifications: Quantity: 2 vertical multistage centrifugal pumps Ebara EVM 18 12F5 Version: MONO/D/SE Flow rate: approx. 130–400 l/min / approx. 7.8–24 m³/h Head: approx. 188–83 m Maximum head: approx. 194 m Engine power: 11 kW / 15 hp Electric motor: AEG AM160MVA2 Supply voltage: 3-phase, 380–415 / 660–720 V, 50 Hz Speed: approx. 2925 rpm Protection class: IP55 P/N: 3180100012 Serial Number: BG3210620 CE marked SAER Elettropompe CVM 131-B/11 Type: Vertical Multistage Centrifugal Pump Flow rate: 10–22 m³/hr Head: 89–20 m Engine power: 5.5 kW / 7.5 hp Supply voltage: 400/690 V, 50 Hz Current: 11 / 6.4 A Speed: 2900 rpm Protection class: IP55 Weight according to type plate: 68 kg Serial Number: 1982125 CE marked Features: Electric motors Exis ...

Press pressure 60ton; max bale weight 350kg; bale size: 120x80x85 cm; filling opening: 109x53cm; Auction-ID: A1-47364-10