vertical boring mill used for sale

This 3-axis DECKEL MAHO DMC 1035 V was manufactured in 2007. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool changer that holds 20 positions and operates at a spindle speed of 20–8,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 V vertical machining centre we have for sale. Contact us for further details.

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

This 3-axis HAAS VM-3 was manufactured in 2015. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a maximum spindle speed of 12,000 rpm and an automatic tool changer with 24 positions. If you are looking to get high-quality machining capabilities, consider the HAAS VM-3 vertical machining centre we have for sale. Contact us for further details.

Travel X/Y/Z: 610mm/406mm/508mm, max. spindle speed: 8000rpm, spindle power: approx. 7.5kW, rapid traverse X/Y: 24m/min, rapid traverse Z: 15m/min, spindle taper: SK40, tool capacity: 24, table dimensions X/Y: 750mm/400mm, max. table load: approx. 350kg, control: Hurco Ultimax 4 Dual Screen. Weight: approx. 4000kg. An on-site inspection is possible.

Construction hoist Steinweg Superlift 200 S Vertical elevator with rack and pinion mast for the construction and finishing industry. The high-performance elevator for removal and repair! The Steinweg Superlift is a practical and extremely powerful lift for the entire construction and finishing industry. With a maximum lifting height of 50 m and a payload of 200 kg it offers countless possible applications. Swivel transport basket 1.40 x 0.80 m., height 1.80 m. Basic unit rollable with 230 volt motor, 1.2 kW. Conveying speed 25 m/min. Control button, limit switch and supply cable on drum. 7 pieces of aluminum masts with 2 m results in an elevator height of approx. 14.50 m. 8 pieces armor and wall holders. Vertical lift for the construction and finishing industry. Construction hoist Steinweg, Superlift, vertical elevator, scaffolding elevator

Simultaneous 5-axis design - Control system SIEMENS 840 D SL - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - Tool holder HSK 63A - High-pressure system IKZ 40 bar - Probe 3D Weight 8,100 kg

This 3-axis Hurco VMX42t was manufactured in 2007. It features an X-axis travel of 1067 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1270 x 610 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42t vertical machining centre we have for sale. Contact us for further details.

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Inv. Num. : 7531 Type: VMC 750 Producer: MAS Created: 2000 Parameters: Control system: VICKERS ACRAMATIC A2100 Work table length: 1000 mm Work table width: 500 mm X-axis travel: 750 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Machine weight: 4000 kg Equipment: Technical Documentation

GRP tank, upright Volume: 23,000 l Dimensions: Ø 2.00 m × 7.50 m high Spout: DN80

This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-4SS was manufactured in 2023. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,321 x 495 mm and a maximum table load of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details.

Conventional Vertical Lathe O-M TMS2-18/40 Made in 1975. Table size: 1800mm Max swing: 4000mm Max turning height: 1500mm Condition Under power.

INDEX - V 300 Y/B Stock number 1039-9419 Country of origin Germany - incl. 24 pos. Pallet circulation system Schnaithmann - Incl. ball screw as spare part - Incl. 39x driven tools - Incl. 39x tool holders Technical details Circumferential diameter max. 450 mm Chuck diameter 400 mm Control Siemens 840D (Index) Main spindle: Max. speed 4,200 min/-1 Drive power - main spindle ( 35.5 / 56 ) kW Max. torque ( 340 / 550 ) Nm C-axis 0.001 ° Tool turret: Number of tool positions 2x 12 pos powered stations 2x 12 pos VDI 30 tool system Max. speed of the applied speed Tools 6,000 rpm Drive power - applied Tools 9.5 kW Max. torque 40%: 19 Nm Y - axis +/- 90 mm B-axis +270° / -90° Travels: x-axis 730 mm z-axis 340 mm y-axis +/- 90 mm B-axis +270° / -90° Feeds: Rapid traverse X: 40 / Z: 30 m/min Pallet changer: Number of pallets 24 pos. Pallet size 410 x ...

Key data: 900 mm, 500 mm, 450 mm

Inv. Num. : 7549 Type: F5 Produzent: MAKINO Erzeugt: 2013 Parametern: Steuerungssystem: FANUC Arbeitstischlänge: 1000 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 30 Stücke Anzahl der Achsen: 4 Stücke Maximale Vertikalspindeldrehzahl: 20.000 1/min Verfahrwege X-Achse: 900 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 450 mm Kegel: HSK 63 F Anzahl aller Werkzeuge: 30 Stücke Ausstattung: IKZ Werkzeughalter

This 3-axis KUNZMANN WF 4/3 was manufactured in 1998. It features a travel of 400 mm in the X, Y, and Z axes, with a table size of 650 x 350 mm and a maximum table load of 250 kg. The spindle speed reaches up to 2,500 rpm, providing efficient machining capabilities. If you are looking to get high-quality vertical machining capabilities, consider the KUNZMANN WF 4/3 vertical machining centre we have for sale. Contact us for further details.

Inv. Num. : 7562 Type: VF2 Produzent: HAAS Erzeugt: 2006 Parametern: Steuerungssystem: HAAS AUTOMATION Arbeitstischlänge: 914 mm Arbeitstischbreite: 356 mm Maximale Tischbelastung (gleichmäßig): 1361 kg Verfahrwege X-Achse: 762 mm Verfahrwege Y-Achse: 406 mm Verfahrwege Z-Achse: 508 mm Spindelleistung: 22.4 kW Maschinengewicht: 3539 kg

This 3-axis Matsuura Vplus 1000/40 was manufactured in 2005. It features a travel range of 1020 mm in the X-axis, 550 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a table size of 1150 x 550 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Matsuura Vplus 1000/40 vertical machining centre we have for sale. Contact us for further details.

This 3-axis YCM NSV 156 A was manufactured in 2013. It features a travel distance of 1530 mm in the X-axis, 650 mm in the Y-axis, and 610 mm in the Z-axis. The machine includes a robust table size of 1630 x 650 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the YCM NSV 156 A vertical machining centre we have for sale. Contact us for further details.

This 5-axis DOOSAN VCF850 was manufactured in 2018. It features a substantial X-axis travel of 3500 mm, Y-axis travel of 950 mm, and Z-axis travel of 800 mm. The machine operates at a maximum rotational speed of 12000 rpm and includes a BT40 tool holder type. If you are looking to get high-quality milling capabilities, consider the DOOSAN VCF850 vertical machining center we have for sale. Contact us for further details.

This 3-axis Quaser MV184P/12B was manufactured in 2015. It features a travel distance of 1020 mm on the X-axis, 610 mm on the Y-axis, and 610 mm on the Z-axis. The machine is equipped with a Siemens 828D controller and has a maximum rotational speed of 12000 rpm. If you are looking to get high-quality machining capabilities, consider the Quaser MV184P/12B vertical machining centre we have for sale. Contact us for further details.

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Key data: 1020 mm, 610 mm, 610 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1200x600mm Axis X ... 1020mm Axis Y ... 610mm Axis Z ... 610mm Spindle speed ... 10-12000 rpm Controlled axes... 3 cooling ... 20bar SK 40 Max. workpiece weight ... 500kg Main engine power ... 22kW Rapid traverse ... 40,40,36m/min Magazine spaces ... 30 Machine weight ... 6970kg L x W x H ... 2920x2820x2860mm The machine is in good condition, possible to test under power.

This 3-axis Mazak VCN-410A was manufactured in 2003. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-410A vertical machining centre we have for sale. Contact us for further details.

General Description Vertical glass washing and drying machine manufactured by Triulzi S.r.l. . Designed for automatic washing and drying of flat glass prior to insulating glass production, tempering, lamination and other architectural glass processing. Suitable for continuous industrial operation. Technical Details Manufacturer: Triulzi S.r.l. Machine type: Vertical glass washing and drying machine Maximum glass height: 3,000 mm Vertical washing and drying configuration Roller conveyor transport system High-efficiency air-knife drying system Industrial electrical control panel with operator interface Suitable for float, coated, laminated and Low-E glass Condition Good used industrial condition. The stainless-steel structure appears complete with straight panels, intact roller conveyor system and access doors. The machine remains installed in an industrial production envi ...

Key data: 800 , 400 , 400

CNC controller: Yasnac Axes X-axis travel mm: 800 Y-axis travel mm: 400 Z-axis travel mm: 400 Rapid traverse m/min: 36 Worktable Table dimensions mm: 800 x 400 Spindle Spindle speed rpm: 10.000 Tool system Tool holder: BT-40 Tool magazine slots: 20 Equipment Chip conveyor High pressure pump Rated power kVA: 58 Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447

This 5-axis DECKEL MAHO DMU 50 was manufactured in 2005. It features a digital swivel rotary table with a diameter of 630 mm and a maximum table load of 200 kg. The machine offers a rapid traverse of 24 m/min and a spindle speed range of 20 - 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50 vertical machining centre we have for sale. Contact us for further details.

This 3-axis SW BA 40 vertical machining centre was manufactured in 2001. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 630 mm, and Z-axis travel of 630 mm. The machine is equipped with a powerful spindle speed range of 20 - 7,500 rpm and a tool magazine with 60 slots. If you are looking to get high-quality machining capabilities, consider the SW BA 40 machine we have for sale. Contact us for further details.

Key data: 350 mm, 500 mm, 450 mm

CNC-controlled precision vertical slotting machine with four CNC axes and an electronic control of the rotary cutting table with a positioning accuracy of 0.001°. A machine for the efficient production of: - Fitting grooves (also conical grooves) -Splines - Internal and external gears -Racks CNC control with 10" color screen and touch screen software for roughing – finishing – fine finishing (This achieves surfaces of the highest possible grades.) Lifting range of the push carriage can be programmed up to 350 mm Push-slide speeds 0 to 80 strokes/min infinitely variable Push-slide swivel range +/- 20° Largest workpiece height 640 mm Projection 500 mm Round table size 450 mm Bore in the round cutting table Ø 135 mm Maximum table load 1,250 kg Table travels longitudinal and transverse – 340 x 340 mm Power transmission of the X + Y axis by precision ball screw ...

This 3-axis HAAS VF-4 was manufactured in 2011. It features a generous X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a 40-tool automatic tool changer and includes a probe and toolsetter for enhanced precision. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details.

Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg

This 3-axis FAMUP MCX 1000 vertical machining centre was manufactured in 1997. It features a longitudinal travel of 1,100 mm, transverse travel of 480 mm, and vertical travel of 470 mm. The machine includes a tool magazine capacity of 30 positions and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the FAMUP MCX 1000 vertical machining centre we have for sale. Contact us for further details.

This 4-axis IBARMIA ZV45 L3000 was manufactured in 2003. It features a powerful 45 kW spindle with a maximum speed of 12,000 rpm and an SK40 tool holder. The machine offers a generous working envelope of 3000 x 800 x 800 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the IBARMIA ZV45 L3000 vertical machining centre we have for sale. Contact us for further details.

Offer 24157 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Stepless belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - Saw blade welder IDEAL -Lighting

Inv. Num. : 6634 Type: MGH 250 Produzent: MECTRON Erzeugt: 2010 Parametern: Steuerungssystem: SINUMERIK 840DSL Arbeitstischlänge: 400 mm Arbeitstischbreite: 300 mm Maximale Tischbelastung (gleichmäßig): 80 kg Maximale Vertikalspindeldrehzahl: 30000 1/min Minimaler Abstand zwischen der Spindel und dem Tisch: 100 mm Maximaler Abstand zwischen der Spindel und dem Tisch: 350 mm Verfahrwege X-Achse: 250 mm Verfahrwege Y-Achse: 250 mm Verfahrwege Z-Achse: 250 mm Maximale Vorschubgeschwindigkeit Achse X: 36 m/min Maximale Vorschubgeschwindigkeit Achse Y: 36 m/min Maximale Vorschubgeschwindigkeit Achse Z: 36 m/min Kegel: HSK E 25 Anzahl der Achsen: 3 Stücke Maschinenhöhe: 1070 mm Maschinenlänge: 1660 mm Maschinenbreite: 1800 mm Maschinengewicht: 1850 kg Ausstattung: Kühler OilMatic C750 Transformator

Tank diameter: 1000mm. Tank height: 4050mm. Auction-ID: A1-49552-130

Table clamping surface: 765 x 400 mm Travel x/y/z: 650/410/510 mm Spindle holder: BT 40 small/large distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8000 rpm Number of tool positions: 20 pieces Feeds: approx. 30 m/min Rapid traverse: approx. 30 m/min electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2300 x 2100 x 2650 mm Weight: 4000 kg

Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46 AR features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46 AR machine we have for sale. Contact us for further details regarding this machine.

Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46A features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46A machine we have for sale. Contact us for further details regarding this machine.

This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details.

Inv. Num. : 7661 Type: 605 CNC Producer: Witech Created: 2005 Parameters: Control system: NUM 1040 Work table length: 220 mm Work table width: 210 mm X-axis travel: 330 mm Y-axis travel: 150 mm Z-axis travel: 150 mm Machine height: 2300 mm Machine length: 1650 mm Machine width: 1730 mm Machine weight: 750 kg Equipment: 4 Tool Holders Pump Spindle temperature device Heidenhain Linear Measurement

This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details.

This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details.

axis stroke (X,Y,Z): 550 x 300 x 425 mm Number of spindle head vertical: 0 St. Number of spindles head horizontal: 0 St. Number of tools: 0 St. Dust suction hood: --- mm Number of milling agregates: --- St. working dimensions: --- mm Year: 1998 Boring power: --- mm Speed of boring spindles: --- U/min. Speed: --- U/min. Required air-pressure: bar Diameter of the saw arbor: mm total power requirement: kw Weight: kg Dimensions (L/W/H): mm Motor output: kW Capacity: kg/h Sawing unit: Sawblade tiltable: ° Saw blade diameter: mm Control: Siemens Sinumerik The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

This 4-axis AXA DBZ vertical machining centre was manufactured in 2005. It features a travel of 750 mm in the X and Y axes, and 600 mm in the Z axis. The machine includes a robust table size of 1000 x 500 mm, with a maximum table load of 800 kg/m². If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VM-6 HE Mold Maker was manufactured in 2008. It features an impressive X-axis travel of approximately 1,626 mm, Y-axis travel of approximately 813 mm, and Z-axis travel of approximately 762 mm. The machine includes a 24-position tool changer and has high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 HE vertical machining centre we have for sale. Contact us for further details.

ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros

Inv. Num. : 4891 Type: VHC3-XTS Produzent: AXA Erzeugt: 2014 Parametern: Steuerungssystem: Heidenhain iTNC530 Einschaltstunden: 22010 h Betriebsstunden: 7118 h Arbeitstischlänge: 2200 mm Arbeitstischbreite: 700 mm Maximale Tischbelastung (gleichmäßig): 3000 kg Anzahl der Achsen: 5 Stücke Minimale Vertikalspindeldrehzahl: 20 1/min Maximale Vertikalspindeldrehzahl: 10000 1/min Verfahrwege X-Achse: 2600 mm Verfahrwege Y-Achse: 1000 mm Verfahrwege Z-Achse: 950 mm Kegel: SK40 Ausstattung: Achse C - integrierter NC-Drehtisch mit einem Durchmesser von 800 mm Achse B - Spindelneigung /- 100° Teiler zum Teilen des Arbeitsbereichs Sonde Schraubstock

Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible.