vertical band saw used for sale

Travel X/Y/Z: 1000mm/600mm/630mm, table dimensions X/Y: 1150mm/600mm, max. table load: 700kg, rapid traverse: 20m/min, speed: 10000rpm, tool positions: 24, machine dimensions X/Y/Z: approx. 2950mm/2650mm/2850mm, weight: approx. 5300kg, control: Mitsubishi Meldas. On-site inspection is possible.

Key data: 2000 mm, 750 mm, 800 mm

Spindle ISO 40 Workpiece weight 2200kg RPM 50 - 15000 kW 46 Volts 400 Cycles 50 Dividing head 250 mm (6th Axis) ATC 40 positions Built in rotary table 800 mm Chip Conveyor

Inv. Num. : 8506 Type: VCE 1600 PRO Producer: MIKRON Created: 2012, GO 2023 Parameters: Control system: Heidenhein iTNC530 Switch-on hours: 67342 h Hours: 32684 h Work table length: 1700 mm Work table width: 850 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 1600 mm Y-axis travel: 900 mm Z-axis travel: 800 mm GO 2023: New Linears Screws on the X and Y axes and new ruler on the Y axis

Inv. Num. : 8113 Type: M 1050 Producer: Microcut Created: 2021 Parameters: Control system: Heidenhain TNC 620 Switch-on hours: 4727 h Operating hours: 2942 h Work table length: 1200 mm Work table width: 600 mm Number of stacking positions: 30 Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Number of T-slots in the table: 6 pieces

SEDIN 1516 Vertical Turret Lathe Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 19200 kg Side support

Carousel contouring machine with 2 shafts (1 milling and 1 sanding) - Complete with 3-sided cab -Diam. max. machinable mm. 800

x-travel: 610 mm y-travel: 455 mm z-travel: 520 mm weight of the machine ca.: 3,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical Flow Wrapper VPX250 + Servo Screw Dosing SDX Rovema VPX 250/400 flow-wrapping machine, overhauled, incl. repainting RAL 9007, Siemens S7 machine control and operation Condition: very good Hours: 150 Availability: immediately Refurbished: 2021 Vertical Flow Wrapper VPX250 Machine equipped with sealing system for heat-sealable packaging materials (e.g. paper/bonding films 60-100μ), with e.g.: - Cross sealing jaws 270 mm - Corrugation cross sealing jaws horizontal 12.0 2.0 mm / to be determined by foil sample - Longitudinal seam sealing jaw 420 mm - Temperature controls via machine operation, incl. monitoring - Sealing temperatures are set via Siemens program and stored per program - New foil cutting blade, pneumatically controlled Capacity: flat tubular bags: up to a maximum of 80/min. Log bottom bags: up to a maximum of 55/min. Depending on bag format ...

Inv. Num. : 8525 Type: LG 1000 Producer: Hartford Created: 2017 Parameters: Control system: FANUC AI 100 Hours: 9285 h Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm

Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg

Vertical Multistage High Pressure Centrifugal Pump GRUNDFOSNome pump, but part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-Vyear approx. 2012Flow rate at 7.2 bar: max. 10 m3/hDischarge height: max. 91.8 metersGrid connection: 400 volts, 50 HzPower: 3 kW- pump structure in 9 stages- made of stainless steel 1.4401- The pump in mint condition was used as a spare parts dispenser, but there are several new pump chambers- part of the magnetic coupling is missingsuitable for drinking water supply, irrigation

5-Axis Vertical Machining Center DMG DMC 75V LINEAR Linear Motors The machine can be viewed in working order in our warehouse in Gussago, Brescia. Mimu Machine Tools Gussago BS Italy Dmg DMC 75 Linear Heidenhain CNC iTNC 530 Tool holder HSK 63 Spindle power 35 kW Spindle speed 18,000 rpm Number of tools 60 X-axis travel 885 mm Y-axis travel 600 mm Z-axis travel 600 mm Rapid feeds X-Y-Z linear axes 90 m/min Roller guides Fourth-axis head yes Fourth-axis head type continuous Fourth-axis head degrees -10° + 110° Rotary table yes Rotary table type continuous Table size 750 mm MACHINE EQUIPMENT Precision package with optical scales on the axes New spindle line The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single setup on Multiple surfaces of the same workpiece. It is generally equipped with multiple motio ...

Technical data: Complete retrofit year 2003 CNC Fagor 8055T Working diameter 5,000mm Table diameter 4,500mm Table speed 35rpm Z axis travel 1,500mm nr.02 RAM capto C8 tool holder Maximum workpiece height 2,500m main motor power 182 Kw nr.02 chip evaders permissible weight on the table 63 ton Machine in excellent condition available unless sold.

Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg

Inv. Num. : 8550 Type: VF-3 Producer: HAAS Created: 2017 Parameters: Control system: HAAS Work table length: 1219 mm Work table width: 457 mm Maximum table load (uniform): 1588 kg Spindle drive power: 22.4 kW Speed: 8100 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Cone: BT 40 Machine weight: 5316 kg

Inv. Num. : 8551 Type: M 1200 Producer: Microcut Created: 2018 Parameters: Control system: Siemens Sinumeric 828D SW4 Work table length: 1400 mm Work table width: 710 mm Maximum table load (even): 1000 kg X-axis travel: 1200 mm Y-axis travel: 730 mm Travel travel Z-axis: 650 mm Number of axles: 30 pieces Machine weight: 10500 kg

Inv. Num. : 8573 Type: VC 1810 Producer: TRIMILL Created: 2015 Parameters: Control system: Heidenhain iTNC 530 HSCI Work table length: 2000 mm Work table width: 1370 mm Maximum table load (uniform): 10000 kg Spindle drive power: 25 kW Maximum vertical spindle speed: 14000 1/min X-axis travel: 1800 mm Y-axis travel: 1000 mm Travel Z axis: 700 mm Maximum feed speed axis X: 30000 mm/min Maximum feed speed axis Y: 30000 mm/min Maximum feed speed axis Z: 30000 mm/min Cone: HSK – A80 Number of all tools: 10 pieces Maximum tool diameter: 110/125 mm Max. tool weight: 12 kg Machine weight: 18000 kg Equipment: Tools Thermal clamps

Inv. Num. : 8553 Type: VOC 1000 Producer: INTOS Created: 2003 Parameters: Control system: Siemens 810D Work table length: 1100 mm Work table width: 500 mm Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine weight: 4500 kg

Heidenhain TNC 530, Table size 700 x 500 mm, Spindle holder CAT40, 24-position automatic, 10,000 rpm spindle Machine weight 7,500 kg, Connection 16 kW

CONTROLS   CNC controls SIEMENS 840 C WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 457 mm   grinding width max. - throughfeed grinding: 80 mm   material thickness max. - throughfeed grindin: 20 mm   grinding width max. - plunge cut grinding: 205 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 23 kW GRINDING SPINDLE 2   drive power: 23 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 240 mm/min   feeder velocity min.: 20 mm/min Scope of delivery: - Machine - emulsion tank new in 2012 Measuring control IONIC 17A

Key data: 420 mm, 300 mm, 250 mm

YASDA YMC 430 Ver. II 5-Axis CNC Vertical Machining Center, 40K RPM, Trunnion Table, 32 ATC, HSK-E32, Fanuc 31i-B5, Hard Milling, LOW HOURS, Year: 2017 CNC Control: yes Type of CNC Control: FANUC 31i-B５ Cutting Time Hours: 8138 X-axis travel: 16.5"/420mm Y-axis travel: 11.8"/300mm Z-axis travel: 9.8"/250mm Table to spindle nose distance: 5.9" - 15.7" / 150mm - 400mm Spindle taper hole: HSK-E32 Spindle speed range: 200-40,000 RPMs Spindle drive motor: 10 HP / 7.5 KW AC ( Continuous ) Table working size: 600mm x 350mm / 26.6" x 13.7" Table Loading capacity: 33 lbs. / 15 kg. Rapid Feed Rate X, Y, Z: 787.4 ipm /20000 mm/min - Standard MODE MAXIMUM CUTTING FEED: 393.7 ipm / 5,000mm/min Min. input increment: 0.0001mm (0.01μm) Optical scale feed back: X, Y, Z-axis 0.000001mm (0.001μm) command available Tool storage capacity: 32 tools Max. tool dia. / length / mass: φ50m ...

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 1900 Nominal / outside width in mm: 920, 1500 Belt width in mm: 800 Driven: YES Engine type: SEW Eur ...

x-travel: 650 mm y-travel: 500 mm z-travel: 500 mm control: Siemens 840 D table surface area: 800 x 500 mm rapid traverse: 60 m/min table load: 1,5 t turning speed range: 0 - 18.000 U/min max. torque on the spindle: 130 Nm power capacity - milling spindle: 15 kW no. of tools in the magazine: 30 Stück tool taper: HSK 63 A | internal coolant system feed: 40 bar weight of the machine ca.: 10,5 t dimensions: 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mm y-travel: 500 mm z-travel: 500 mm control: Siemens 840 D table surface area: 800 x 500 mm rapid traverse: 60 m/min table load: 1,5 t turning speed range: 0 - 18.000 U/min max. torque on the spindle: 130 Nm power capacity - milling spindle: 15 kW no. of tools in the magazine: 30 Stück tool taper: HSK 63 A | weight of the machine ca.: 11 t dimensions: 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1660 mm y-travel: 760 mm z-travel: 660 mm control: Mazatrol M Plus table surface area: 2000 x 760 mm table load: 1,0 t rapid traverse: 24 m/min turning speed range: 7000 U/min power capacity - milling spindle: 11 kW tool taper: SK 40 | | no. of tools in the magazine: 2 x 24 Stück weight of the machine ca.: 8,1 t dimensions: 4,2 x 3,2 x 2,8 m Vertical Machining Center traveling coloumn - internal coolant - chipconveyor - ext, hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Properties: Volume 10500 L Material V2A (AISI 304) 1.4301 Vertical design Total height 5000 mm Diameter width 1800 mm Surface marbled on the outside Number of feet 4 Last Use Food Description: Tank topstock: Clapper bottom Crane eyelets Cylinder: Level indicator without scale in plastic Threaded nozzle DN 60 and disc valve DN 60 Manhole 300 x 400 mm Tasting tap Ladder hooks Tank underbody: Clapper bottom forward-drawn residual drain pipe with disc valve DN 60 4 feet

A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.

max diam 1830 , table diameter 1600 , sinumeric 840 d . 2 x vertical

Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder

x-travel: 700 mm y-travel: 420 mm z-travel: 610 mm table-size: 1260 x 490 mm spindle taper: HSK E50 spindle turning speed range: 36000 U/min tool change unit: 42 weight of the machine ca.: 5 t HEIDENHAIN TNC430 Coolant through spindle www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...

Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1250x800 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 500 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 35.000 mm/1, Rapid feed x-y-z axes: 50.000 mm/1, Spindle taper type: 40-Din 69871, Automatic tools change nr.: 30, Spindle speed: 0- 18.000 rpm, Spindle motor power: 15 Kw, Cnc: HEIDENHAIN i530, Approx net weight: 10.000 Kg, Accessories: Chip conveyor

Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine di ...

x-travel: 1140 mm y-travel: 710 mm z-travel: 610 mm CNC-control: Heidenhain TNC640 table-size: 1300 x 700 mm max. table load: 1000 kg spindle taper ISO: ISO 40 spindle turning speed range: 8.000 U/min feed stepless: max. 10.000 mm/min rapid traverse: 24/24/24 m/min drive capacity - spindle motor: 7,5 / 11 kW tool change unit: 30 Pos. coolant: IKZ 40 bar chip conveyor: kW voltage: 400 V total power requirement: 25 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,25 x 3,08 x 3,00 m - Serial No.: 4P11152J1 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - X- and Z-Axis with 6 roller supports for each axis! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 820/850 mm y-travel: 300/330 mm z-travel: 485/505 mm weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1670 x 1620 x 2500 m Further techniscal detals please consider pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8809 Type: V-30i Producer: Leadwell Created: 2012 Parameters: Control System: FANUC Series Oi-MD Switch-on hours: 32488 h Hours: 9273 h Work table length: 890 mm Work table width: 500 mm Maximum table load (even): 300 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 410 mm Travel travel Z-axis: 610 mm Machine weight: 4500 kg

Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.

Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper

Inv. Num. : 8848 Type: VX 15 Producer: HURON Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Work table length: 1700 mm Work table width: 810 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 1510 mm Y-axis travel: 810 mm Travel Z axis: 810 mm Cone: ISO 40 Number of all tools: 24 pieces Machine height: 4000 mm Machine length: 5400 mm Machine width: 3310 mm Machine weight: 14500 kg Equipment: Conveyor Central air cooling Washing gun Probe Blum Rulers

Inv. Num. : 8854 Type: MINIMILL HE Producer: HAAS Created: 2006 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 305 mm Maximum table load (uniform): 227 kg Spindle drive power: 7.5 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 406 mm Y-axis travel: 326 mm Z-axis travel: 381 mm Cone: ISO 40 Number of all tools: 10 pieces Machine height: 2565 mm Machine length: 2119 mm Machine width: 2077 mm Machine weight: 2018 kg

CNC vertical lathe Type: SKJ 12 NC Manufacturer: TOS Modernization: 2002 Control: Mefi CNC 856 Max workpiece diameter: 1400 mm Clamping plate diameter: 1250 mm Maximum workpiece height: 1150 mm Maximum workpiece weight: 6000 kg Clamping plate speed: 2.5 - 225 rpm Main motor power: 37 kW Machine weight: 13000 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

GENERAL Project No.: 905808 Quantity: 1 pcs. Manufacturer: MATEC Type: 30-HV Control: Heidenhain iTNC 530 Year of Make: 2004 Condition: Used machine Approx (hrs): 54117 Program run approx. (hrs.): 14875 Approx. (hrs): 35997 DESCRIPTION MILL 4Axles Travel in X 2000 mm Travel in Y 600 mm Travel in Z 800 mm Tool holder SK 40 Max. speed milling spindle 12000 1/min Milling head automatically swivels 1 degree Chain tool magazine 48 stations Table size 2500x700 mm Interface 4th axis Clamping hydraulics OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Partition wall for pendulum machining Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Internal coolant supply Coolant device with paper belt filter Machine condition light GENERAL TECHNICAL DATA Machine dimensions (LxWx ...

Properties Volume 10000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1200 kg Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 9400 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 10000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1200 kg Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 9400 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers