vertical band saw used for sale

construction circular saw, circular saw -Engine power: 2.6 KW -Voltage: 220 volts -Dimensions: 885/670/H810 mm -Weight: 42 kg

Saw blade, wood saw blade, circular saw blade -0040 420 30 -Ø: 420x3.5/3.00x30 -Z96: T 13.74 -n max.: 4300 -0317-1114700 HW -Price: per piece -Number: 3x available -Weight: 3.5 kg/piece

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: 850 - 1500 mm adjustable -Roll: Ø 80 x 840 mm -Plate below: Ø 480 mm -Price: per piece -Number: 2 pieces -Dimensions: 915/480/H850 mm -Weight: 44 kg/piece

Clamping angle for workpiece clamping -Thickness: 15 mm -Surface: milled -Dimensions: 270/105/H115 mm -Weight: 6 kg

Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Technical data: SEGA BIANCO MOD. 350 UNDOCUMENTED

saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll width: 295 mm -Dimensions: 480/420/H845 mm -Weight: 12.8 kg

Saw roller stand, saw roller stand, saw stand, roller conveyor stand -for: hacksaw, bandsaw, cold circular saw -Roller height: adjustable from 845-1350 mm -Roller width: 300 mm -Dimensions: 480/420/H845 mm -Weight: 9 kg

SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006

Scoring circular saw blade, scoring circular saw blades -two-piece, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

For sale second hand line for cutting top layers from planks. Cutting from 1,5-6,0mm all soft and hard wood.

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

- engine power: 1.1 kW - dial diameter: 300 mm - cut from below - cutting at an angle of -45 °, 90 °, + 45 °, intermediate angles set manually - vertical pneumatic pressure - protective cover - cooling installation

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

Specifications Year of construction: 1995 Saw blade Ø (mm): 400 Directly from the customer used from November from CH-Pratteln available.

Panel saw, table saw, heavy precision circular saw, metal circular saw, cold circular saw -Sliding carriage: 200 mm -Speeds: 90-4000 rpm -Cutting width: 710 mm -Saw blade diameter: max. 260 mm -Max. Cutting height: 40 mm -Height adjustment -Transport dimensions: 1450/900/H1100 mm -Weight: 254 kg

Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 350 mm -Drive: kW -Speed: 900/1700 rpm -Dimensions: 900/520/H1280 mm -Weight: 150 kg

Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.

SPECIFICATIONS: cutting height mm: 90 cutting width mm: 310 Width transport carpet mm: 340 Tool min - max.: mm: 280 - 360 Power KW: 22 1 device saw blade adjustment 2 adjustable lasers Closed transport chain Complete with: - 1 selection table - 1 chip conveyor belt - 1 double discharge conveyor

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Saw blade, wood saw blade, circular saw blade -DB 05/01 -Ø 200x6.0x60 -Z24 -n max. 9500 -Price: per piece -Number: 1x available -Weight: 1 kg/piece

Saw blade, wood saw blade, circular saw blade -0402-5021202 HW -UFN - equipped -Ø 200x4.1/2.8x65 -Z36 = T 17.44 -n max. 9000 -Price: per piece -Number: 2x available -Weight: 0.7 kg/piece

Saw blade, wood saw blade, circular saw blade -04 43 184 -Ø 180x4.0x60x28 -n max. 9600 -Price per piece -Number: 1x available -Weight: 0.7 kg/piece

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Saw blade, wood saw blade, circular saw blade -SK-1130 AA -Ø 250x4.0/2.8x70x24 -n max. 7500 -Price: per piece -Number: 1x available -Weight: 2 kg/piece

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Saw blade, wood saw blade, circular saw blade -0504-5041355x HW -UFN - equipped -Ø 200x4.0-7.0/3.0x70 -Z12 = T 26.16 -n max. 9000 -Price: per piece -Number: 1x available -Weight: 0.7 kg/piece

Saw blade, wood saw blade, circular saw blade -1005 MEC -Ø 293 x 3.5/3.0 x 60 -Z72 = T 51.13 -n max. 8000 -Price: per piece -Number: 1x available -Weight: 1.1 kg/piece

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Saw blade, wood saw blade, circular saw blade -105311-188267 -Ø 180x3.2/2.2 -Z 36 -n max. 10600 -Price: per piece -Number: 1x available -Weight: 0.5 kg/piece

Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m

Weibert SMA-700T Rocker saw PTO drive Tractors power min. 15hp PTO speed: max. 540 rpm Drive saw blade: belt drive Saw blade speed: max. 1440 rpm Saw blade diameter: 700mm Carbide-tipped Holder 30mm, tooth pitch 32mm, thickness 3.2mm Total weight 136kg Dimensions: 109mm x 85mm x 110mm (LxWxH) G&JAN-1055004

Saw blade, wood saw blade, circular saw blade -Ø 355x4.3/3.2x30 -Z72 = T 15.49 -n max. 5500 -0904-1041782x HW -UFN- equipped -Price: per piece -Number: 1x available -Weight: 2.6 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 420x3.5/2.8x60 -Z72 = T 18.32 -n max. 4300 -0211-5107670x HW -UFN- equipped -Price: per piece -Number: 3x available -Weight: 3.2 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 355x3.8/3.0 -Z72 = T 15.49 -n max. 5500 -0798-98541264x -UFN- equipped -Price: per piece -Number: 2x available -Weight: 2.6 kg/piece

Saw blade, wood saw blade, circular saw blade -0299-99560572 -Ø 350x10.0-11.8x60 -Z36 = T 30.53 -n max. 5500 -Price: per piece -Number: 1x available -Weight: 6 kg/piece

Minimax SC4E Sliding table saw Motor 5kw 400V 50hz Suction nozzle diameter 120mm Suction nozzle. Saw blade protection 60mm Cutting width with parallel fence 900mm length width left 3200mm Trimming length: 2310mm Saw blade inclination 90-45° cutting height 90°: 100mm cutting height 45°: 63mm Saw blade diameter: 4000 1/min Weight approx. 454kg G&STÜ-5504524 Optional: Scorer and top protection hood

Saw blade, wood saw blade, circular saw blade -Ø 290 x 2.4/3.0 x 60 -Z 54 -n max. 6500 -Price: per piece -Number: 10x available -Weight: 2.5 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 350x6.0/4.0x60 -Z36 = T 30.53 -n max. 5500 -0599-99561709 -Price: per piece -Number: 4x available -Weight: 6 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 355x4.4/3.2x30 -Z72 = T 15.49 -n max. 5500 -1003-1032858x HW -UFN- equipped -Price: per piece -Number: 12x available -Weight: 2.6 kg/piece

CML moving blade multi-blade model SCA320R-T350 with: - 1 fixed blade + 1 movable blade with motorized positioning - 1 fixed laser + 1 mobile laser, for cutting line display - 350mm belt, useful cutting width 320mm - useful cutting height with movable blade 90mm (120mm without moving blade device) - main engine kW 22 / HP 30 - motorized lifting of the pressor - manual lubrication pump