venti oelde used for sale

Manufacturer: Venti Oelde, Type: EC 35-2-AS, Year: 1992, Filter system - positive pressure: yes, Volume flow rate m³/h: 7500, Filter surface in m²: 70, Filter hoses: Polyestergewebe, Qty. filter hoses: 40, Electronic control board: 1, Suction pipe diameter 1 mm: 15, FREE TEXT: inkl. Schaltschrank, Year :1992

Key data: 330 m², 7000 kg, 4600 mm

Extraction system Venti-Oelde Year: 1995 Filter flow rate 42000 m3/h Ventilators: 1 x 30 KW / 24,000 m3/h 1 x 15 KW / 5000 m3/h Trough Conveyor + Fan Return air

technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

High-performance fan Zenner, type VTZ 710/63/1 special, built in 2014, consisting of control cabinet, frequency converter, cell lock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of construction: 2014 Volume: 4.72 m³/s Temperature: 20°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 470 kg The fan is intended for transporting shredded paper/cardboard. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment. ...

Manufacturer: Esta Ventilator, Year: 2006, Diameter intake mm: 150, Engine power kW: 1,1 Kw, rotations rpm: 2800, Direkt drive: yes, Year :2006

Manufacturer: Ventilator, Diameter intake mm: 250/190, Engine power kW: 5,5, rotations rpm: 960, Outlet side mm: 250,

Manufacturer: Ventilator, Diameter intake mm: 250, Engine power kW: 5,5, Flow rate approx. m3/h: 4500, rotations rpm: 2980, Direkt drive: yes, geschlossenes Flügelrad: gekröpft, Ausblasseite mm: 250250, Wight approx. kg: 500,

General SKU317T816 LocationBarneveld MakeVentilex TypeFBD-4,5 Year of construction1999 Main Features MaterialStainless steel Motor3 KW Surface4.5 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface4,5 m² Bed sizes5000x900 mm, 5000x1200 mm Product inletØ250 mm Number of sections:2 Motor3 kw, 3x380 Volt (EExe II T3) Capacity600-2260 kg/hr (nom. 1750 kg/h) Max. temperature80-125 °C MaterialStainless steel 1.4435 (316L) Information Mounted on mild steel framecheck Floorspace5,5x1,4 m Total height3 m Weight3200 kg Extra SpecificationsHeating medium: steam, 5 bar Cooling medium: cooling water, chilled water 5-7 °C Pressed air: 5-6 bar, water and oil free with: wet scrubber/condensor: Ø 1000 x 3300 mm, Inlet flange: Ø 350 mm, Outlet flange: Ø 350 mm, 1-full-cone spray nozzle (capacity: 7 m³/h at 2 bar), 3 inspecion covers: ...

General SKU254S1023 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 560/20/1 ZAH No.79.016 Year of construction2016 Pressure Pressure buildup0.1 Bar Main Features Capacity0.6 m3/Min Motor5.5 KW Pressure0.1 Bar Specified Features - Blower MaterialStainless steel 2.4605 (Alloy 59) Blowercheck Capacity36 m3/h (total increase of pressure 10038 Pa, density 3,13 Kg/m3) Motor5,5 kW 400/690 volt Inletdia. 105mm Outletdia. 50mm (2x) Information Total height1,2 M Weight400 Kg CEcheck Floorspace2,0x1,2 M ATEX compatiblecheck Extra SpecificationsMax temperature 310-370 degr. C with extra small cooling fan 0.37 kW 208-255/360-450 volt BlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU254S1022 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 280/50/1 WBN No.78154 Year of construction2015 Pressure Pressure buildup0.005 Bar Main Features Capacity7.8 m3/Min Motor0.55 KW Pressure0.005 Bar Specified Features - Blower Blowercheck Capacity472 m3/h (total increase of pressure 510 Pa, density 1,197 Kg/m3) Motor0.55 kW 220-240/380-420 Volt Inletdia 135mm Outletdia. 105mm MaterialMild steel Information Total height1,0 M Weight120 Kg CEcheck Floorspace0,6x0,5 MBlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU254S211 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 1000/20/1 ZAH No.78153 Year of construction2015 Pressure Pressure buildup0.0459 Bar Main Features Capacity13.3 m3/Min Motor18.5 KW Pressure0.045 Bar Specified Features - Blower Blowercheck Capacity799 m3/h (total increase of pressure 4587 Pa, density 0,65 Kg/m3) Motor18.5 kW 400/690 volt Inletdia. 190mm Outletdia. 190mm MaterialStainless steel Information Total height1,7 M Weight1400 Kg CEcheck Floorspace2,3x1,5 M Extra SpecificationsMax temperature 450 degr. C with extra small cooling fan 0.37 kW 208-255/360-450 volt BlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

FILTERING SUBSTATION FOR WOOD DUST AND SAWDUST FRIULANA VENTILATION - USED - NO. 72 Cotton cloth filter bags with dimensions: FI 200mm - H 2000 mm - Maximum filter FILTERING capacity 13,000 m3/hour - Material: galvanized sheet metal It is equipped with: - Screw conveyor for material extraction - with variable speed drive and gearbox - Rotary valve - 1 fan with 15 kW motor - 1 fan for transporting the material from the filter to the silo (or other storage) - Electro-vibration system for cleaning the filter bags - Electrical control cabinet - Dimensions: 2400 x 2900 x H 5600

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flap, pressure relief flap -Lucoma: Pressure relief flap DRK 370 x 405 mm -Dimensions: 370/405/165 mm -Weight: 5.3 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Ventilation duct, ventilation flap, ventilation system, filter system, dust extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of galvanized sheet steel -Dimensions 1575/1275/H175 mm -Weight 50 kg

Ventilation system FABRIKat TROGES Vienna, different size, 4,000m3/h, 5,000m3/h, 7,500m3/h, 12,500m3/h, 26,000m3/h. All ventilation system sid equipped with 4 connections for: supply air, exhaust air, fresh air, exhaust air and heat recovery, cross heat exchanger, connections for hot water and cold water. More info. 0043-6641838175 or info@frigocom.at

Ventilation system York for heating and cooling. Heating 64 KW with gas burner. Cool 33 KW with 2 cooling compressors. 8,500m3/h air mend. The devices are new, never run, even folded. Request on 0043-6641838175 or info@frigocom.at

Article: diaphragm valve pneumatic valve Manufacturer: Georg Fischer GF Type: Diastar PVC-U / EPDM Condition: used, well Model: d63 DN50, PN 6, IP 65 P Max: 6 bar Quantity: There are 10 units available.

Article: diaphragm valve pneumatic valve Manufacturer: Georg Fischer GF Type: Diastar PVC-U / EPDM Condition: used, well Model: d50 DN40, PN 6, IP 65 P Max: 6 bar Quantity: 1 PCs in stock

Sale due to restructuring. Stainless steel ventilation Tower 4700 mm, diameter height approx. 1250 mm, material stainless steel Tower now available. Loading with a forklift Questions under 02131 / 4064849 Mr. Rössler

Industry - fan / blower manufacturer: DSD air Division (today: Ferrostaal air technology GmbH) Type: Dara 1000 R Year of construction: 1992 Flow rate: 35,000 m ³/h Pressure: 6,500 PA Speed min.: 2,035 U/min Speed max.: 2,160 rpm Power: 75 kW Air density: 1.1222 kg / m ³ Maximum temperature: 90 ° C Original price: 68.000,00 € net In very good condition!

4 pcs. Diameter 400 mm Width 960 mm Height 450 mm Different lengths

new Fan type MV2000 EVO 5 Manufacturer MEKICS Co., Ltd Korea special bargain price now !

fan Maquet Servo-i 15 pieces Each system is refurbished, tested incl. new Accu, new Oxygen cell , new hoses.

Manufacturer: Trane Type: CLCE 1810 Manufacturing year: 2005 Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Manufacturer: Nicotra Type: VRE RDH 710 K1 Maximal drive power: 37 kW Maximal rev: 1700 1/min Electro motor: Manufacturer: Tee Electric motors Type: QU 200 L4C-40 H Electric power: 30 kW

Manufacturer: Kongskilde Machine type: 100503007 Overall size: 1200 x 1100 x 800 mm Impeller diameter: 600 x 200 mm Engine revs: 4100 1/min 22 kW

8 pieces Evita 4 5 pieces Evita XL 2 pieces Evita 4 Edition All devices are tested and equipped with new oxygen cell and new patient hose connection.

Available in stock 2 x NEVER USED Industrial Ventilation Fans TSBD-3. The photos are only examples of the same model. The ventilation fans on sale have never been used and are still inside the original packaging. Specifications: Model: TSBD-3 Dimensions: 1100 x 1100 x 400 mm Flow: 32 500 m3/h Power: 0.75 kW Voltage: 380 V Frequency: 50 Hz Blade Diameter: 1000 mm Speed: 427 r/min Single phase

We offer here a Dräger Oxylog 2000 in very good condition. The device is complete with power supply, NiCd battery pack, pressure reducer, breathing tube, connection hose, instructions for use German, English, French. The device can of course be shipped. Oxylog 2000 – time-controlled, volume-constant Emergency ventilator for patients weighing 100 mL or more Respiratory volume. Applications: – Mobile use in emergency medicine / primary care of emergency patients – During transport in rescue vehicles/helicopters – During transfer trips and transfer flights – During the transfer of ventilator patients Convertible into different languages German, English, Spanish, French, Dutch, Swedish, Portuguese, Italian If you have any further questions, please do not hesitate to contact us at 05462/7456204 or by e-mail

Nominal diameter 40 mm, angle valve , 24 V , 2.5 W

1. Cleanroom incl. ventilation technology a Manufacturer: REUKO Klima-Service GmbH & Co. KG b. Type: individual solution c. Date build: 2012 d. Use: idle operation for several months, reconstitution of medicinal products in 2 clinical trials (including cytostatics) e. Clean Room Classes: D (for Isolator environment) f. Area/rooms: Slice and laboratory (with separate air lock for goods) g. Control: Individual solution by ELREST (DDC-Controller) 2. Insulator a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, 3. Particle Analyzer a. Manufacturer: KM-Optoelektronik b. Type: PCSS c. Date build: 2010

Fan, fan, electric motor, blower -Speed: 1425 rpm -Fan diameter: 500 mm -Dimensions: 680/680/H300 mm -Weight: 32 kg

Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Type: CPV10-GE-MP-6 -Connection: electrical -Weight: 1 kg

Fan, fan, electric motor, blower -Speed: 1300 rpm -Fan diameter: mm -Dimensions: 82/82/H86 mm -Weight: 1.3 kg

Volume flow: 27,000m³/h, pressure increase: 3800pa, fan belt length: 3550mm, motor power: 55kW, available after June 2023.

System includes (1) External Device MITSUBISHI PUHZ-ZRP 140 YKA, year of construction: 2013 (2) Roof Ventilator TROX DRVF-H 250/ 28-6, year of construction: 2016, with energy recovery unit.

There are 40 identical tube fans available.

Volume flow: 7650m³/h, heating output: 21kW, connected load: 87kVA, weight: 960kg.

Volume flow: 3000m³/h, coolant capacity: 20kg, coolant output: 43.8kW, weight: 1.27t.

Safety valve, fixed, sealed PAGUS 25 bar DN18 Connection thread: 3/4 ( inch ) Material: Brass New ! Dimensions: 110 x 58 x 33 mm

Ventilation grille PAGUS 600 x 600 mm large box: 420 x 420 x 30 mm frame ( outside ): 335 x 335 mm frame ( inside ): 255 x 255 mm mesh size: 20 mm round opening: Ø 300 / 250 mm Material: Stainless steel New ! Dimensions: 600 x 600 x 60 mm

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: sheet steel -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 515 mm -Material: sheet steel -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Ventilation system, comfort compact ventilation, heating system for classrooms, conference rooms, open-plan offices, restaurants -Volume flow: 6000 m³/h -Motor power: 1.85 kW -Dimensions: 1950/1100/H1200 mm -Weight: 260 kg

Chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose -Ventilation hose: exhaust hose with flange -Flange: Ø outside 290 mm, slightly curved -Length: 3500mm -Quantity: 20 hoses available -Price per piece -Weight: 1.6 kg/pc.

Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Manufacturer: Schuko, ventilation duct distributor branch with butterfly valve -Pipe connection: 3x Ø 265 mm -Butterfly valve: manual adjustment -Transport dimensions: 1100/880/H430 mm -Weight: 44 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flap, non-return flap, lamellar fan -Ventilation damper: louvered louvre damper -Type: 7 mechanically adjustable slats, without drive -Number: 4x ventilation flap available -Price per piece -Total dimensions: 1240/1240/80 mm -Weight: 40 kg/pc.